Glovebox Emblems Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Castiron9 · 11-12-2003, 07:24 PM

Was just curious and I know that some of the more knowledgeable board members can answer my question....On a Cheyenne Super Longhorn were there two emblems on the glove box.My particular one has 3 holes top left and 3 holes bottom right?????????Or did someone just drill extra holes for some type ofemblem that is no longer there????????

**Canadian694x4** · 11-12-2003, 11:44 PM

TTT....those upper left holes look like the factory holes below too....interesting, it be cool to know if there was some other Emblem (longhorn or not) that we never seen before...

gonebad2 · 11-12-2003, 11:57 PM

I like the original emblems that Chevy used but my truck didn't come with one. Plus, everything has been changed so none of the factory emblems would have matched the truck. I'm going to drill the holes and attach this.

shuttermutt · 11-13-2003, 12:17 AM

I'm afraid I can't tell you more than you already know, but I have a similar pickle. My 68 CST glovebox is black (the rest of the interior is brownish-greenish-gold (saddle?) and the emblem is missing. Can somebody tell me what the emblem is supposed to look like and if the black is correct?

shuttermutt · 11-13-2003, 12:51 AM

BTW, you can see a pic of my interior (kinda) by clicking here. Whazzit? Gold?

**Canadian694x4** · 11-13-2003, 12:56 AM

to give you a little more perspective...this is a 67 glove box door and emblem...the one you may be looking for would be a "Chevrolet-with-CST" off the end of it...

shuttermutt · 11-13-2003, 01:22 AM

That's duuurn close. My entire glove box door is 60/40 black (looks factory) and I think the emblem might be lower. Is there a specific CST emblem or did they just use the standard "Chevrolet" one, I wonder.

toms68cst · 11-13-2003, 01:24 AM

Castiron, I don't think those upper left holes are factory.

Shuttermut, Here's a vintage picture of a 68 CST interior with the bench seat. You can see a little of the glovebox emblem. It's similar to the one that Canadian694x4 posted. Both Customs and CST's had this emblem. It just says Chevrolet with a blue bowtie. There's no "CST" on the 67-68 emblem.

67cst · 11-13-2003, 01:26 AM

i have a simillar question, i got the proper badge for the 67, its the plain one that says chevrolet, but my glovebox door didnt come with one , can someone tell me where to drill the holes and what size of bit to use, and does the emblem just sortve press on ? how would you get at the back unless you drill right though, which i dont want to do

toms68cst · 11-13-2003, 01:44 AM

67cst, I just used thin double-sided tape to attach mine. You can get some round clips that insert into the glovebox holes but I didn't have much luck with them.

It almost looks like the 67 emblems were mounted a little higher than the later ones were.

**Canadian694x4** · 11-13-2003, 02:55 AM

Quote:

Originally posted by toms68cst
Castiron, I don't think those upper left holes are factory.

Shuttermut, Here's a vintage picture of a 68 CST interior with the bench seat. You can see a little of the glovebox emblem. It's similar to the one that Canadian694x4 posted. Both Customs and CST's had this emblem. It just says Chevrolet with a blue bowtie. There's no "CST" on the 67-68 emblem.

Thanks for clarifying...I wasn't completely sure...

11-12-2003, 07:24 PM	#1
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Glovebox Emblems Questions Was just curious and I know that some of the more knowledgeable board members can answer my question....On a Cheyenne Super Longhorn were there two emblems on the glove box.My particular one has 3 holes top left and 3 holes bottom right?????????Or did someone just drill extra holes for some type ofemblem that is no longer there???????? Attached Images __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

11-12-2003, 11:44 PM	#2
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	TTT....those upper left holes look like the factory holes below too....interesting, it be cool to know if there was some other Emblem (longhorn or not) that we never seen before... __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

11-12-2003, 11:57 PM	#3
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	Dash Emblem I like the original emblems that Chevy used but my truck didn't come with one. Plus, everything has been changed so none of the factory emblems would have matched the truck. I'm going to drill the holes and attach this. Attached Images __________________ Your Bought And Sold....I Got Your Soul!

11-13-2003, 12:17 AM	#4
shuttermutt Don't say "Oops!", Doctor Join Date: Nov 2003 Location: Houston, TX Posts: 677	I'm afraid I can't tell you more than you already know, but I have a similar pickle. My 68 CST glovebox is black (the rest of the interior is brownish-greenish-gold (saddle?) and the emblem is missing. Can somebody tell me what the emblem is supposed to look like and if the black is correct? __________________ 'Mutt 1968 CST LWB: R.I.P. 1967 Chevelle: TPI 454 beast 1967 C10 SWB: Claimed when Bumpster didn't put it on his list

11-13-2003, 12:51 AM	#5
shuttermutt Don't say "Oops!", Doctor Join Date: Nov 2003 Location: Houston, TX Posts: 677	BTW, you can see a pic of my interior (kinda) by clicking here. Whazzit? Gold? __________________ 'Mutt 1968 CST LWB: R.I.P. 1967 Chevelle: TPI 454 beast 1967 C10 SWB: Claimed when Bumpster didn't put it on his list

11-13-2003, 12:56 AM	#6
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	to give you a little more perspective...this is a 67 glove box door and emblem...the one you may be looking for would be a "Chevrolet-with-CST" off the end of it... Attached Images __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

11-13-2003, 01:22 AM	#7
shuttermutt Don't say "Oops!", Doctor Join Date: Nov 2003 Location: Houston, TX Posts: 677	That's duuurn close. My entire glove box door is 60/40 black (looks factory) and I think the emblem might be lower. Is there a specific CST emblem or did they just use the standard "Chevrolet" one, I wonder. __________________ 'Mutt 1968 CST LWB: R.I.P. 1967 Chevelle: TPI 454 beast 1967 C10 SWB: Claimed when Bumpster didn't put it on his list

11-13-2003, 01:24 AM	#8
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,285	Castiron, I don't think those upper left holes are factory. Shuttermut, Here's a vintage picture of a 68 CST interior with the bench seat. You can see a little of the glovebox emblem. It's similar to the one that Canadian694x4 posted. Both Customs and CST's had this emblem. It just says Chevrolet with a blue bowtie. There's no "CST" on the 67-68 emblem. Attached Images __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

11-13-2003, 01:26 AM	#9
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,303	i have a simillar question, i got the proper badge for the 67, its the plain one that says chevrolet, but my glovebox door didnt come with one , can someone tell me where to drill the holes and what size of bit to use, and does the emblem just sortve press on ? how would you get at the back unless you drill right though, which i dont want to do __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

11-13-2003, 01:44 AM	#10
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,285	67cst, I just used thin double-sided tape to attach mine. You can get some round clips that insert into the glovebox holes but I didn't have much luck with them. It almost looks like the 67 emblems were mounted a little higher than the later ones were. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.