R134a freon can with a valve in the top? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

61_FL_Apache · 08-25-2018, 06:32 PM

I picked up a couple of cans of this and it has a self-sealing valve in the top. I tried to use one with my old school can piecer and you can hear it open the valve, but no freon comes out.

Is there a different tool for this?

I need to get a side can tap next.. It does not discriminate. It will poke a hole in anything

Thanks for the help!

61_FL_Apache · 08-28-2018, 04:39 PM

I have been told by a guy at Advance Auto there is an adapter for this need. He was out of them so I still dont know what they look like.

The original can tap will still get freon out of the can with the valve, but at a slower rate. You have to screw the needle all the way in and back it off a little then the freon will flow. So that worked for now.

**truckdude239** · 08-31-2018, 11:00 AM

Ive gotten a couple at work but i just use my side pirceing tap

61_FL_Apache · 08-31-2018, 05:24 PM

The valve makes sense. I only use freon here and there for personal use so having a way to not vent it is a good idea.

08-25-2018, 06:32 PM	#1
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	R134a freon can with a valve in the top? I picked up a couple of cans of this and it has a self-sealing valve in the top. I tried to use one with my old school can piecer and you can hear it open the valve, but no freon comes out. Is there a different tool for this? I need to get a side can tap next.. It does not discriminate. It will poke a hole in anything Thanks for the help! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

08-28-2018, 04:39 PM	#2
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: R134a freon can with a valve in the top? I have been told by a guy at Advance Auto there is an adapter for this need. He was out of them so I still dont know what they look like. The original can tap will still get freon out of the can with the valve, but at a slower rate. You have to screw the needle all the way in and back it off a little then the freon will flow. So that worked for now. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

08-31-2018, 11:00 AM	#3
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: R134a freon can with a valve in the top? Ive gotten a couple at work but i just use my side pirceing tap __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

08-31-2018, 05:24 PM	#4
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: R134a freon can with a valve in the top? The valve makes sense. I only use freon here and there for personal use so having a way to not vent it is a good idea. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.