NE Rochester 1bbl monojet carb

[ne72gmc]

Looking for a rochester 1bbl monojet carb for my 72 GMC project. It has the L6 250 and I am keeping it mostly stock, except for upgrading to Hedman Headers. Hoping to fine one in really good condition since this is a frame-off restore.

[Graham57a]

Have one at this thread http://67-72chevytrucks.com/vboard/s...d.php?t=759755 that I don’t need. Would need to be rebuilt for a frame off but I would let it go for cheap

[ne72gmc]

How much and was the engine running decent before you started parting it? Let me know how much to ship to 68135.

Also, how much for the steering column, and what condition is it in? And do you have pictures of it?

Thanks,

[Graham57a]

Originally Posted by ne72gmc

How much and was the engine running decent before you started parting it? Let me know how much to ship to 68135.

Also, how much for the steering column, and what condition is it in? And do you have pictures of it?

Thanks,

$50 shipped on the carb, it ran when I got it but it had really dirty fuel and would need to be gone through.

I could do $150 on the column plus shipping. The column is in great condition and very nice 503 original paint. The levers aren’t perfect but the column is really tight

[Graham57a]

Pics of the column

[Tchevy68]

That column a factory tilt?

[Graham57a]

Originally Posted by Tchevy68

That column a factory tilt?

No sir, all factory tilts are black from GM. This is a 3 on the tree column.