89 GMC Steering Column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcrich65 · 09-19-2018, 03:57 PM

I am working on my 89 GMC Burb and before I starting this steering Column apart again does anyone have an exploded view of all parting and there placement, so that I can make sure I'm reinstalling them correctly.

1989 R1500 2WD column shift W/tilt and cruise

Ski-me · 09-20-2018, 09:41 AM

I couldn't find one when I did it. Take a lot of pictures all the way through the rebuild, before you take them apart. My reference pics really helped! Especially the slide locking mechanism and spring location.

I did use some guide as reference, I'll see if I can find.

Ski-me · 09-20-2018, 09:45 AM

Found it, a PDF. Really helpful when I did it....probably twice!

It's 9MB...can't upload.

But found the link!@!

http://www.crankshaftcoalition.com/w...ck_Rebuild.pdf

Koz1 · 09-24-2018, 06:20 PM

if you have to pull signal switch ,take pic of wire sequence,and pull each wire out of harness plug,make it so much easier pulling and putting back thru column,just went thru mine after a theft thieves ,broke plastic housing and selector easy to start after,along with breaking 1\4 glass to access. Like mentioned just take pics as you go.

Irish1941 · 09-25-2018, 12:01 AM

They are easy to do but it can be a PIA if you've never did it.
This is best basic guide I ever came across.
http://www.fieros.de/en/articles/steering.html
I know it's Fiero but pretty much basically same Saginaw column.
That other link is better for complete rebuild.

09-19-2018, 03:57 PM	#1
mcrich65 Registered User Join Date: Sep 2015 Location: Lumberton, NC Posts: 51	89 GMC Steering Column I am working on my 89 GMC Burb and before I starting this steering Column apart again does anyone have an exploded view of all parting and there placement, so that I can make sure I'm reinstalling them correctly. 1989 R1500 2WD column shift W/tilt and cruise

09-20-2018, 09:41 AM	#2
Ski-me Registered User Join Date: May 2012 Location: Colo Springs, CO Posts: 870	Re: 89 GMC Steering Column I couldn't find one when I did it. Take a lot of pictures all the way through the rebuild, before you take them apart. My reference pics really helped! Especially the slide locking mechanism and spring location. I did use some guide as reference, I'll see if I can find. __________________ - Jeff 89' K5 Blazer, 2.5" lift, 35" tires 04' GMC Yukon XL, 3/4 ton, 8.1L

09-20-2018, 09:45 AM	#3
Ski-me Registered User Join Date: May 2012 Location: Colo Springs, CO Posts: 870	Re: 89 GMC Steering Column Found it, a PDF. Really helpful when I did it....probably twice! It's 9MB...can't upload. But found the link!@! http://www.crankshaftcoalition.com/w...ck_Rebuild.pdf __________________ - Jeff 89' K5 Blazer, 2.5" lift, 35" tires 04' GMC Yukon XL, 3/4 ton, 8.1L

09-24-2018, 06:20 PM	#4
Koz1 Registered User Join Date: Aug 2015 Location: USA Posts: 25	Re: 89 GMC Steering Column if you have to pull signal switch ,take pic of wire sequence,and pull each wire out of harness plug,make it so much easier pulling and putting back thru column,just went thru mine after a theft thieves ,broke plastic housing and selector easy to start after,along with breaking 1\4 glass to access. Like mentioned just take pics as you go.

09-25-2018, 12:01 AM	#5
Irish1941 Registered User Join Date: Nov 2012 Location: Los Angeles, CA Posts: 450	Re: 89 GMC Steering Column They are easy to do but it can be a PIA if you've never did it. This is best basic guide I ever came across. http://www.fieros.de/en/articles/steering.html I know it's Fiero but pretty much basically same Saginaw column. That other link is better for complete rebuild.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.