Trying to confirm correct bucket seat brackets. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jlmerie** · 09-23-2018, 05:51 PM

I am trying to confirm these are correct first generation Blazer bucket seat brackets. They came out of a 1972 Blazer, but someone had changed to later bucket seats. I have included a side picture showing the height of the drivers side bracket. Any help is appreciated.

**jaros44sr** · 09-25-2018, 06:28 AM

They look alot like my utility seat brackets, what is the demension of the mounting holes on the driver side?

**jlmerie** · 09-25-2018, 09:14 AM

Quote:

Originally Posted by jaros44sr

They look alot like my utility seat brackets, what is the demension of the mounting holes on the driver side?

The distance of the mounting holes from front to back are almost exactly 13" center to center.

**jlmerie** · 09-25-2018, 04:27 PM

Quote:

Originally Posted by jaros44sr

They look alot like my utility seat brackets, what is the demension of the mounting holes on the driver side?

I feel pretty certain they are not utility seat brackets. I have the spid for the Blazer they came out of. It is a CST model. Now, anything can be changed, but it seems unlikely to me. Thanks

NJKelly · 09-28-2018, 12:08 AM

Mine are utility and are about 15 or so inches apart front to back

**71K5Randy** · 09-29-2018, 10:02 PM

They look correct to me. As for height, 73+ (top pic) were in my blazer when I bought it, and then I bought 1st gen (bottom pic)to replace them.

09-23-2018, 05:51 PM	#1
jlmerie Registered User Join Date: Sep 2005 Location: Colorado Posts: 1,077	Trying to confirm correct bucket seat brackets. I am trying to confirm these are correct first generation Blazer bucket seat brackets. They came out of a 1972 Blazer, but someone had changed to later bucket seats. I have included a side picture showing the height of the drivers side bracket. Any help is appreciated. Attached Images __________________ James

09-25-2018, 06:28 AM	#2
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Trying to confirm correct bucket seat brackets. They look alot like my utility seat brackets, what is the demension of the mounting holes on the driver side? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-28-2018, 12:08 AM	#5
NJKelly Registered User Join Date: Mar 2018 Location: New Jersey Posts: 379	Re: Trying to confirm correct bucket seat brackets. Mine are utility and are about 15 or so inches apart front to back

09-29-2018, 10:02 PM	#6
71K5Randy Senior Member Join Date: Aug 2015 Location: Belleville, IL (St. Louis metro) Posts: 725	Re: Trying to confirm correct bucket seat brackets. They look correct to me. As for height, 73+ (top pic) were in my blazer when I bought it, and then I bought 1st gen (bottom pic)to replace them. Attached Images __________________ 71 K5 CST Blazer 350 70 Suburban 350 71 Chevelle SS 454 69 Olds 442 454 (yes, Chevy power!) 68 Camaro RS 327 66 Chevelle SS 396 Members I have met: 62cdan, 60case, daddymoo2, aotte1, 70shortfleet, countr, Cowboy#40, chevy71super, davischevy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.