Got some parts, need some help. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Moloko · 11-17-2003, 09:43 PM

I just got two rust free doors for my truck from a friend who was parting a truck out. Problem, when he was taking the one door off he ripped the hinge mounting area out of the door. Can this be fixed, or is the whole door gone? It only ripped a 1/4 inch chunk out, and basicly detached the metal in a square shape directly around the 4 mounting holes.

*Randy70C-10* · 11-17-2003, 11:04 PM

Should be ok if you just tap the area back into place and weld it.

*rage'nrat638* · 11-17-2003, 11:06 PM

slap your buddy

.....

with a mig welder most anything can be fixed

11-17-2003, 09:43 PM	#1
Moloko Hoarding Rusty Objects Join Date: Aug 2002 Location: Slatington, PA Posts: 267	Got some parts, need some help. I just got two rust free doors for my truck from a friend who was parting a truck out. Problem, when he was taking the one door off he ripped the hinge mounting area out of the door. Can this be fixed, or is the whole door gone? It only ripped a 1/4 inch chunk out, and basicly detached the metal in a square shape directly around the 4 mounting holes. __________________ 1985 Chevrolet K20 Silverado 1994 GMC Yukon Follow me on Youtube! - http://www.youtube.com/user/FuelInjectionSucks

11-17-2003, 11:04 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Should be ok if you just tap the area back into place and weld it.

11-17-2003, 11:06 PM	#3
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	slap your buddy ..... with a mig welder most anything can be fixed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.