does anyone make a tubular control - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 11-18-2003, 11:27 AM

I have heard of some that are stainless but very pricey! I'd like to have some that would lower the front a little but not break the bank!

Thanks

*Randy70C-10* · 11-18-2003, 11:31 AM

I have seen them but I don't know where they came from. Maybe a little surfing and I can find out.

djracer · 11-18-2003, 11:34 AM

n/m

11-18-2003, 12:59 PM

I know brothers in Corona makes them. here
BROTHERS price: $279.95
SALE price: $269.95

Suggested Retail: $299.95
Quantity

BROTHERS new tubular "A" Arms were designed specifically for lowered 1963-72 trucks! Besides the custom look, these arms function to correct improper upper "A" arm offset caused by lowered coils and/or drop spindles. The new tubular arms will allow for easy alignment settings without the hassle of using large amounts of shims. For trucks with power steering, these arms offer an added bonus by allowing caster to be increased beyond the factory setting of 2.5 degrees. Stabilizing the front end & eliminating "following the road".

boozel67 · 11-18-2003, 04:31 PM

these are djm suspention lower control arms i have cost 349.49 to my door from summit. comes with balljoints and cross shafts. IMO very good quality.

11-18-2003, 06:01 PM

Those from Summit are they dropped or stock height?

*redbowtie* · 11-18-2003, 08:41 PM

Here ya go....

http://djmsuspension.com/Products/Pr...y/C10Parts.htm

gonebad2 · 11-18-2003, 09:01 PM

Thanks Linus.....I think I will give Brothers a call tomorrow (that is after the wife leaves for work). Those look awesome. Thaks, Greg

11-18-2003, 11:27 AM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	does anyone make a tubular control I have heard of some that are stainless but very pricey! I'd like to have some that would lower the front a little but not break the bank! Thanks __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-18-2003, 11:34 AM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	thanks Randy n/m n/m __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-18-2003, 12:59 PM	#4
Linus0014 Guest Posts: n/a	I know brothers in Corona makes them. here BROTHERS price: $279.95 SALE price: $269.95 Suggested Retail: $299.95 Quantity BROTHERS new tubular "A" Arms were designed specifically for lowered 1963-72 trucks! Besides the custom look, these arms function to correct improper upper "A" arm offset caused by lowered coils and/or drop spindles. The new tubular arms will allow for easy alignment settings without the hassle of using large amounts of shims. For trucks with power steering, these arms offer an added bonus by allowing caster to be increased beyond the factory setting of 2.5 degrees. Stabilizing the front end & eliminating "following the road". Attached Images

11-18-2003, 04:31 PM	#5
boozel67 FORSALE Join Date: Apr 2003 Location: central pa Posts: 95	these are djm suspention lower control arms i have cost 349.49 to my door from summit. comes with balljoints and cross shafts. IMO very good quality. Attached Images __________________ 1967 chevy 1/2 ton short step

11-18-2003, 09:01 PM	#8
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	Thanks Linus.....I think I will give Brothers a call tomorrow (that is after the wife leaves for work). Those look awesome. Thaks, Greg __________________ Your Bought And Sold....I Got Your Soul!

11-18-2003, 11:31 AM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I have seen them but I don't know where they came from. Maybe a little surfing and I can find out.

11-18-2003, 06:01 PM	#6
Linus0014 Guest Posts: n/a	Those from Summit are they dropped or stock height?

11-18-2003, 08:41 PM	#7
redbowtie Account Suspended Join Date: Nov 2003 Location: Fort Worth, Texas Posts: 0	Here ya go.... http://djmsuspension.com/Products/Pr...y/C10Parts.htm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.