Knocked the cobwebs off...... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FuelCellGuy · 11-18-2003, 11:08 PM

the bedcover. It is time to refit, rethink, and paint this SOB. It needs to be mounted and finished up. Can't believe how much dust and spider webs can be accumulated over three years!

It will be worth it. Will post more pics when painting is complete. Later, FCG

casey · 11-18-2003, 11:15 PM

cobwebs? looks like its ready to go, you must be doing some motor work. why is the hood off?

FRENCHBLUE72 · 11-18-2003, 11:17 PM

That is 2 nice a truck to let sit and the coral paint is killer...

griesel72 · 11-18-2003, 11:21 PM

Your truck is bad assed. Get that thing out and show it off.

FuelCellGuy · 11-18-2003, 11:33 PM

is in the process. After the 454 flatened TWO cams, I said screw this! I bought an LT1/4L60E. That is why the hood is off. I am fixing to build the mounts and put it in for a mockup, then pull it, paint it and mount it for good. I have been teased by this truck for the last year and still haven't got to drive it for more than 20 miles. The LT1 WILL solve that problem.

67cst · 11-18-2003, 11:37 PM

dude your truck is gorgeous, im so envious

FuelCellGuy · 11-18-2003, 11:37 PM

this is a better pic....

FuelCellGuy · 11-18-2003, 11:39 PM

I think some of you misunderstood, or I mis explained. I knocked the cobwebs off the BEDCOVER. It needs to be painted. I am just to that part of the project now. The cover has been made for three years only to get stored in the corner. Won't be long. Later, FCG

jay-dawg · 11-18-2003, 11:45 PM

Hi Mark,
Are you going to run A/C. if so, are you going to leave the accessories as is and cut the frame, or will you get the aftermarket accessory brackets? I'll probably hit you up for a gas tank one of these days.

jay

**72afr** · 11-19-2003, 12:37 AM

nice lookin truck

SWEET7T · 11-19-2003, 12:45 AM

want to donate your 454?! I know of a very good home for it!!!

dinnut · 11-19-2003, 01:40 AM

i know of a very good home even closer than sweet7t. how about we just swap the parts truck for the 454? lol... PLEASE?

Hooter · 11-19-2003, 04:08 AM

good luck with the transplant, lots of wiring involved, some guys have done it, and they should be able to explain it all, cuz I sure can't, hevent done it myself yet

rigo · 11-19-2003, 11:28 AM

Fuelcellguy...could you give us some more info on your bedcover..some under shots of it?...is it steel, aluminum, fiberglass? What did you use for hinges?

I'm thinking about building one for mine...just need to see some examples...

thanks
rigo

C10Squared · 11-19-2003, 01:53 PM

wow. Lookin good.
I need to get an LT1 for mine.

*67Fleetsidedream* · 11-19-2003, 01:56 PM

That is a sharp looking truck.......

71sub · 11-19-2003, 08:20 PM

I 2nd Rigo's request for more info / pic's on the bed cover ....

lost wages · 11-20-2003, 03:22 AM

3rd request, about to get one for mine, info please.

jugernot · 11-20-2003, 07:05 AM

I first saw your truck on the resource page and thought "wow now that is a nice truck." I hope I can get mine to look as nice. Great job.

rigo · 11-21-2003, 02:17 AM

any info or pics on the bed cover construction?

FuelCellGuy · 11-21-2003, 09:38 AM

I will try to post some this weekend with full details. As well as fuel cells, I can build these at a very e=reasonable price. Details to come!

Hugger · 12-02-2003, 10:35 PM

Fuel -
Did you ever post any more info on your bed cover??
I would be interested in possibly having you make me one.
Thanks

FuelCellGuy · 12-03-2003, 12:55 AM

I moved my attention to the engine. I also ordered the spray in bedliner setup. I want to do this first, and then I will get right back to the bedcover. I will post pic and all the details. Thanks for the patience. Later, FCG

landon4421 · 12-03-2003, 01:01 AM

Great to hear you are getting things done !

Smokin72on20s · 12-03-2003, 01:22 AM

fuelcell, what is with those headlights on your truck? i was browsing your website and saw that pic of your truck in the dark, and your headlights look cool! those dont look stock.

11-18-2003, 11:08 PM	#1
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Knocked the cobwebs off...... the bedcover. It is time to refit, rethink, and paint this SOB. It needs to be mounted and finished up. Can't believe how much dust and spider webs can be accumulated over three years! It will be worth it. Will post more pics when painting is complete. Later, FCG Attached Images

11-18-2003, 11:17 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	That is 2 nice a truck to let sit and the coral paint is killer... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-18-2003, 11:21 PM	#4
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Your truck is bad assed. Get that thing out and show it off. __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

11-18-2003, 11:33 PM	#5
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Engine swap.... is in the process. After the 454 flatened TWO cams, I said screw this! I bought an LT1/4L60E. That is why the hood is off. I am fixing to build the mounts and put it in for a mockup, then pull it, paint it and mount it for good. I have been teased by this truck for the last year and still haven't got to drive it for more than 20 miles. The LT1 WILL solve that problem. Attached Images

11-18-2003, 11:37 PM	#6
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	dude your truck is gorgeous, im so envious __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

11-18-2003, 11:15 PM	#2
casey Registered User Join Date: Jan 2003 Location: Kelowna B.C. Canada Posts: 2,048	cobwebs? looks like its ready to go, you must be doing some motor work. why is the hood off?

11-18-2003, 11:37 PM	#7
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Maybe... this is a better pic.... Attached Images

11-18-2003, 11:39 PM	#8
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Whoops... I think some of you misunderstood, or I mis explained. I knocked the cobwebs off the BEDCOVER. It needs to be painted. I am just to that part of the project now. The cover has been made for three years only to get stored in the corner. Won't be long. Later, FCG

11-18-2003, 11:45 PM	#9
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	Hi Mark, Are you going to run A/C. if so, are you going to leave the accessories as is and cut the frame, or will you get the aftermarket accessory brackets? I'll probably hit you up for a gas tank one of these days. jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

11-19-2003, 12:37 AM	#10
72afr Beep! Beep! Join Date: Nov 2003 Location: Rural, MO Posts: 281	nice lookin truck __________________ 1972 Chevrolet C/10 shortbed, stepside, 350, HEI, Fire Engine Red, Black Interior, Former Army cargo transport 2003 Chevrolet 2500HD CC 6.0 4wd 2004 Jeep Rubicon some aftermarket stuff... 2019 Jeep Unlimited Rubicon (the wife's baby hauler)

11-19-2003, 12:45 AM	#11
SWEET7T Try spinnin 4 rear tars Join Date: Sep 2003 Location: Salt Lake City, Utah Posts: 757	want to donate your 454?! I know of a very good home for it!!! __________________ SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB

11-19-2003, 01:40 AM	#12
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	i know of a very good home even closer than sweet7t. how about we just swap the parts truck for the 454? lol... PLEASE? __________________ 70 longbed 496/th400/Ford 9"

11-19-2003, 04:08 AM	#13
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	good luck with the transplant, lots of wiring involved, some guys have done it, and they should be able to explain it all, cuz I sure can't, hevent done it myself yet __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

11-19-2003, 11:28 AM	#14
rigo Flake Daddy Join Date: Jan 2003 Location: Plainview TEXAS Posts: 456	Fuelcellguy...could you give us some more info on your bedcover..some under shots of it?...is it steel, aluminum, fiberglass? What did you use for hinges? I'm thinking about building one for mine...just need to see some examples... thanks rigo __________________ 1968 SWB Fleet Daily Driver 350/TH400 shaved driprail,emblems,tailgate,air ride suspension 1964 Pontiac Catalina 2dr. hardtop shaved everything, air ride suspension 1998 Range Rover 1960 El Camino....in the works.....

11-19-2003, 01:53 PM	#15
C10Squared Registered User Join Date: Sep 2003 Location: W. Atlanta, GA Posts: 180	wow. Lookin good. I need to get an LT1 for mine. __________________ '72 Chevy Custom/10 Shortbed '77 2wd K5 “Halfbaked” '93 Indy pace truck ‘70 GMC Jimmy ‘76 K5 Blazer Follow me on instagram @C10squared



Register or Log In To remove these advertisements.

11-19-2003, 01:56 PM	#16
67Fleetsidedream Wiseass secured himself a BAN Join Date: Nov 2000 Location: MOON!!! Posts: 2,282	That is a sharp looking truck.......

11-19-2003, 08:20 PM	#17
71sub Registered User Join Date: May 2002 Location: Stockton, CA Posts: 169	bed cover I 2nd Rigo's request for more info / pic's on the bed cover .... __________________ 71 C/10 : 350 / 700r4 ; Ford 9" posi 3.50 with 31x10.5 rear tires, single drive shaft, C-notch, 2.5" drop spindles, keyless entry 71 Suburban 350/350 -- caddy tail lights, keyless entry, late model seats, billet Autometer instrument cluster 70 Ford Torino -- 351W (balanced & blueprinted ), C4, VDO gauges

11-20-2003, 03:22 AM	#18
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	3rd request, about to get one for mine, info please.

11-20-2003, 07:05 AM	#19
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	I first saw your truck on the resource page and thought "wow now that is a nice truck." I hope I can get mine to look as nice. Great job.

11-21-2003, 02:17 AM	#20
rigo Flake Daddy Join Date: Jan 2003 Location: Plainview TEXAS Posts: 456	any info or pics on the bed cover construction? __________________ 1968 SWB Fleet Daily Driver 350/TH400 shaved driprail,emblems,tailgate,air ride suspension 1964 Pontiac Catalina 2dr. hardtop shaved everything, air ride suspension 1998 Range Rover 1960 El Camino....in the works.....

11-21-2003, 09:38 AM	#21
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Yes... I will try to post some this weekend with full details. As well as fuel cells, I can build these at a very e=reasonable price. Details to come!

12-02-2003, 10:35 PM	#22
Hugger Registered User Join Date: Mar 2003 Location: Wichita, KS Posts: 137	Fuel - Did you ever post any more info on your bed cover?? I would be interested in possibly having you make me one. Thanks __________________ 72 LWB - Hugger Orange 350/350 3.73 Next; 335hp GM Crate

12-03-2003, 12:55 AM	#23
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Sorry all.... I moved my attention to the engine. I also ordered the spray in bedliner setup. I want to do this first, and then I will get right back to the bedcover. I will post pic and all the details. Thanks for the patience. Later, FCG

12-03-2003, 01:01 AM	#24
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Great to hear you are getting things done ! __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

12-03-2003, 01:22 AM	#25
Smokin72on20s Ebay Junky Join Date: Oct 2003 Location: CO Posts: 893	fuelcell, what is with those headlights on your truck? i was browsing your website and saw that pic of your truck in the dark, and your headlights look cool! those dont look stock. __________________ 1972 CHEVY C-10 SWB 2WD - Possible Typhoon 4.3 turbo drivetrain.. 1983 Chevy c10 swb 2wd - possible 350tbi supercharged...

Register or Log In To remove these advertisements.