CA WTB: Flywheel Cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1968k20** · 12-01-2018, 10:11 PM

I have a 1973 with an automatic,350 that I need a flywheel/bellhousing cover for.

sweetk30 · 12-01-2018, 10:16 PM

just a fyi i use to mix them up also

flywheel = stick shift

flex plate = auto

sure made it a pain when searching until i finally remembered this .

**Ironhorse** · 12-01-2018, 10:42 PM

Quote:

Originally Posted by 1968k20

I have a 1973 with an automatic,350 that I need a flywheel/bellhousing cover for.

Pretty sure I have a flex plate cover for a TH350 in the parts shed. Will look tomorrow and get back with you. Will post a couple pics of it if I have one.

**Mr_Rich** · 12-01-2018, 11:46 PM

Is one of these what you need? The front one is off a T300 two-speed and the back one I used on a T350 that I had in a car I owned.

**1968k20** · 12-02-2018, 11:58 AM

Quote:

Originally Posted by Ironhorse

Pretty sure I have a flex plate cover for a TH350 in the parts shed. Will look tomorrow and get back with you. Will post a couple pics of it if I have one.

Thank you!

**Ironhorse** · 12-02-2018, 01:17 PM

Couple pics of the flex plate cover I have. Original GM steel cover, not the flimsy plastic like GM started putting out for later production. No ripped or cracked mount holes, light paint nics from gravel and such.

Did what it was designed to do, kept the gravel out of the flex plate area, LOL.

$25 plus shipping, money order payment, do not have Paypal.

**1968k20** · 12-02-2018, 09:24 PM

Quote:

Originally Posted by Mr_Rich

Is one of these what you need? The front one is off a T300 two-speed and the back one I used on a T350 that I had in a car I owned.

Is the 350 plastic or metal?

**Mr_Rich** · 12-03-2018, 01:23 AM

The T350 is plastic. GM part#465471; back in the day when they used shorter part #'s.

12-01-2018, 10:11 PM	#1
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	WTB: Flywheel Cover I have a 1973 with an automatic,350 that I need a flywheel/bellhousing cover for. __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

12-01-2018, 10:16 PM	#2
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: WTB: Flywheel Cover just a fyi i use to mix them up also flywheel = stick shift flex plate = auto sure made it a pain when searching until i finally remembered this . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

12-02-2018, 01:17 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB: Flywheel Cover Couple pics of the flex plate cover I have. Original GM steel cover, not the flimsy plastic like GM started putting out for later production. No ripped or cracked mount holes, light paint nics from gravel and such. Did what it was designed to do, kept the gravel out of the flex plate area, LOL. $25 plus shipping, money order payment, do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

12-03-2018, 01:23 AM	#8
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: WTB: Flywheel Cover The T350 is plastic. GM part#465471; back in the day when they used shorter part #'s. __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C

12-01-2018, 11:46 PM	#4
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: WTB: Flywheel Cover Is one of these what you need? The front one is off a T300 two-speed and the back one I used on a T350 that I had in a car I owned. Attached Images __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.