Please Identify - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DBear · 12-03-2018, 04:15 PM

Can anyone tell me what this is exactly....probably a dumb question, but I truly can't remember what it is. Thanks

**raggedjim** · 12-03-2018, 04:29 PM

Clutch rod block-off plate. I think mine has some kind of rubber plug...

Rg

DBear · 12-03-2018, 05:54 PM

LOL....I knew it was a dumb question. Thanks...probably look for the plug instead of the metal plate.

flashed · 12-03-2018, 09:20 PM

Do all automatic trucks have those ?

**truckster** · 12-03-2018, 09:36 PM

Quote:

Originally Posted by flashed

Do all automatic trucks have those ?

I can't say all, but every one I have seen does.

DBear · 12-03-2018, 09:48 PM

I have two....burb and K5, which both have this hole and metal cover.

**bigdon-70blazer** · 12-03-2018, 10:15 PM

Not a dumb question. My 70 blazer had some sort of rubber plug. It was automatic.

**raggedjim** · 12-05-2018, 10:23 AM

Here's what mine has...
http://67-72chevytrucks.com/vboard/s...ighlight=plugs

Not sure if it's factory correct.

Roger

hemi43 · 12-05-2018, 11:57 AM

I thought GM put that there so that guys could run wires through it 45 years later for their LS conversions? I guess I was wrong !

**raggedjim** · 12-05-2018, 12:50 PM

Quote:

Originally Posted by hemi43

I thought GM put that there so that guys could run wires through it 45 years later for their LS conversions? I guess I was wrong !

That's some forward thinking right there!

**truckster** · 12-06-2018, 08:11 PM

Quote:

Originally Posted by hemi43

I thought GM put that there so that guys could run wires through it 45 years later for their LS conversions? I guess I was wrong !

No, that's what the TSC grommet is for...

12-03-2018, 04:15 PM	#1
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 867	Please Identify Can anyone tell me what this is exactly....probably a dumb question, but I truly can't remember what it is. Thanks Attached Images

12-03-2018, 04:29 PM	#2
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,476	Re: Please Identify Clutch rod block-off plate. I think mine has some kind of rubber plug... Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

12-03-2018, 05:54 PM	#3
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 867	Re: Please Identify LOL....I knew it was a dumb question. Thanks...probably look for the plug instead of the metal plate.

12-03-2018, 09:20 PM	#4
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Please Identify Do all automatic trucks have those ?

12-03-2018, 09:48 PM	#6
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 867	Re: Please Identify I have two....burb and K5, which both have this hole and metal cover.

12-03-2018, 10:15 PM	#7
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Please Identify Not a dumb question. My 70 blazer had some sort of rubber plug. It was automatic.

12-05-2018, 10:23 AM	#8
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,476	Re: Please Identify Here's what mine has... http://67-72chevytrucks.com/vboard/s...ighlight=plugs Not sure if it's factory correct. Roger __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

12-05-2018, 11:57 AM	#9
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,526	Re: Please Identify I thought GM put that there so that guys could run wires through it 45 years later for their LS conversions? I guess I was wrong !



Register or Log In To remove these advertisements.