What engines options were there in a 59 GMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Pardue'sCustoms* · 11-20-2003, 11:52 PM

What engines options were there in a 59 GMC Step-side?

ShamrockCustoms · 11-23-2003, 07:31 PM

i believe there were only 2 options:

235 straight 6.

newly introduced 283 v8.

not sure if they still offered the 265 v8 for 58,59.

mac57truck · 11-24-2003, 10:51 PM

The GMC's actually ran Pontiac V-8's.

rico_bob · 11-26-2003, 12:29 AM

I believe our friend here deserves the right information if we know it or can find it for him/her. Don't you all agree? After all we are here to help one another and I personally have been helped a lot by being a member of this discussion board.

Here is a site for the GMC "Truck Nuts" like me! Although I have a Hienz 57 of a truck (1/2 GMC and Half Chevy) Ha Ha!

Even my MI license plate reads "57 HEINZ" So let's see if the "right" info can be handed off to our latest TN (truck nut) running back OK?

http://www.1955gmc.com/index.html

Quoted from this site:
"GMC used different running gear than the Chevy trucks and the interiors were different. The 6 cyl motors were GMC and the V8 motors were Pontiac design Pontiac has always had a relationship with GMC, and in 1955 the new Pontiac V8 motor was shared with them. A 288 cubic inch motor was used in the trucks and 1955 is the start a long run with this motor for Pontiac. (Also GMC) truck(s) came from the factory with a 288 coupled to a four speed Hydra-Matic transmission"(or manual three speeds) Words in parens are added and are mine...rico.

11-20-2003, 11:52 PM	#1
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	What engines options were there in a 59 GMC What engines options were there in a 59 GMC Step-side?

11-23-2003, 07:31 PM	#2
ShamrockCustoms Project56 on hold Join Date: Aug 2003 Location: Burleson, TX Posts: 489	i believe there were only 2 options: 235 straight 6. newly introduced 283 v8. not sure if they still offered the 265 v8 for 58,59. __________________ Shamrock Customs Forever-in-the-Future Custom Shop 2009 Mitsubishi Lancer GTS daily driver 1956 Chevy Stepside rodstoration on winter hold

11-24-2003, 10:51 PM	#3
mac57truck Registered User Join Date: Jun 2003 Location: St.Clair ,Michigan Posts: 100	The GMC's actually ran Pontiac V-8's. __________________ Current project 1957 chevy short box with C-4 Vette suspensions front and rear.lots more mods to come.Will be LS1 powered when it finally hits the road.I also plan to use a 58 Fleetside box in order to be different.Still in the building stages.

11-26-2003, 12:29 AM	#4
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	GMC The right information? OK ! I believe our friend here deserves the right information if we know it or can find it for him/her. Don't you all agree? After all we are here to help one another and I personally have been helped a lot by being a member of this discussion board. Here is a site for the GMC "Truck Nuts" like me! Although I have a Hienz 57 of a truck (1/2 GMC and Half Chevy) Ha Ha! Even my MI license plate reads "57 HEINZ" So let's see if the "right" info can be handed off to our latest TN (truck nut) running back OK? http://www.1955gmc.com/index.html Quoted from this site: "GMC used different running gear than the Chevy trucks and the interiors were different. The 6 cyl motors were GMC and the V8 motors were Pontiac design Pontiac has always had a relationship with GMC, and in 1955 the new Pontiac V8 motor was shared with them. A 288 cubic inch motor was used in the trucks and 1955 is the start a long run with this motor for Pontiac. (Also GMC) truck(s) came from the factory with a 288 coupled to a four speed Hydra-Matic transmission"(or manual three speeds) Words in parens are added and are mine...rico. __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.