Dually conversion almost done - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cochino12 · 12-19-2018, 07:37 PM

I know its not much to look at yet but the dually conversion in my c30 is done. 5/7 drop with ridetech aol in the rear. Next up will be some new wheels , fitech, then paint.

sweetk30 · 12-19-2018, 07:43 PM

nice truck . love the swap over to drw look .

and do your self a huge favor learn from others like me and read up on each efi system . i have had nothing but problems with holley sniper . i have read a lot since my problems started and of the 3 kits from holley sniper / fitech / edelbrock pro flo 4 ....... the edelbrock wins in my book so far if i picked again .

i have a thread in the engine section here if you wish to read it . and its the short version of all my info .

**Palf70Step** · 12-19-2018, 09:40 PM

I like it. Regular cab squarebody dually is the way to go!

SunSoaked · 12-19-2018, 11:19 PM

X2 on what Sweetk30 said. I've nothing but bad experience with Holley and fitech. Consider Edelbrock Pro-flo.

**lolife99** · 12-19-2018, 11:44 PM

Any progress pics of installing the rear dually fenders on a standard bed?

cochino12 · 12-19-2018, 11:54 PM

Quote:

Originally Posted by Palf70Step

I like it. Regular cab squarebody dually is the way to go!

Quote:

Originally Posted by SunSoaked

X2 on what Sweetk30 said. I've nothing but bad experience with Holley and fitech. Consider Edelbrock Pro-flo.

I already have a Fitech that I acquired in trade, maybe I'll sell it and swap a 5.3 instead. Maybe a better option since I have a 4l80 that I need to swap into something

Quote:

Originally Posted by lolife99

Any progress pics of installing the rear dually fenders on a standard bed?

This is the standard bed, I cut template from a junk dually bed that I had, second picture is just mocked up before I trimmed the bedside, then painted a couple of nice dually fenders that I had laying around.

SCOTI · 12-20-2018, 11:02 AM

I'm diggin' it.....Well done!

sweetk30 · 12-20-2018, 12:39 PM

Quote:

Originally Posted by cochino12

swap a 5.3 instead. Maybe a better option since I have a 4l80 that I need to swap into something.

x2 on this if i had to do it over again for sure .

SCOTI · 12-20-2018, 01:00 PM

Quote:

Originally Posted by sweetk30

nice truck . love the swap over to drw look .

and do your self a huge favor learn from others like me and read up on each efi system . i have had nothing but problems with holley sniper . i have read a lot since my problems started and of the 3 kits from holley sniper / fitech / edelbrock pro flo 4 ....... the edelbrock wins in my book so far if i picked again .

i have a thread in the engine section here if you wish to read it . and its the short version of all my info .

I know a couple of guys running the FiTechs & they love them. They heard/read various stories (as did I) but they gave it a shot. They said it basically came down to ensuring 'the electrics' were 100% on point. One of the 2 local guys I'm referring to has his set-up on a twin turbo SBF in a 32 Ford street rod.

Weird how hit & miss the issues can be.

**lolife99** · 12-20-2018, 05:25 PM

Thanks for the pics.
Did you swap in a DRW rearend?

cochino12 · 12-20-2018, 08:42 PM

Quote:

Originally Posted by lolife99

Thanks for the pics.
Did you swap in a DRW rearend?

No, I kept the 14 bolt with 2" spacers so I could use 20" eagle wheels but I was unaware they had gone out of business until recently. Im not sure I like the price tag on adapters and 22's. May end up with something like this

http://www.wheelsandspinners.com/pro...&cat=62&page=3

**lolife99** · 12-20-2018, 09:20 PM

Quote:

Originally Posted by cochino12

No, I kept the 14 bolt with 2" spacers so I could use 20" eagle wheels but I was unaware they had gone out of business until recently. Im not sure I like the price tag on adapters and 22's. May end up with something like this

http://www.wheelsandspinners.com/pro...&cat=62&page=3

In my opinion, nothing looks as good as 10-lug Alcoa’s.
The wheels you picked don’t look bad, just off in the lugnut area.

cochino12 · 12-20-2018, 10:07 PM

Quote:

Originally Posted by lolife99

In my opinion, nothing looks as good as 10-lug Alcoa’s.
The wheels you picked don’t look bad, just off in the lugnut area.

I totally agree, but for the price I may settle. Maybe in the next few months some of these wheel companies will produce an affordabe 20" direct bolt.

3drburb · 12-21-2018, 12:07 AM

That is nice!
I like the look with the clean painted white wheels.

**57NAPCO** · 12-21-2018, 06:26 AM

Quote:

Originally Posted by 3drburb

That is nice!
I like the look with the clean painted white wheels.

Agreed

cochino12 · 12-27-2018, 01:39 PM

i like this too, not sure id feel safe stretching a 22 over a 22.5 wheel though

Ziegelsteinfaust · 12-27-2018, 02:09 PM

Nice job, and it looks good.

I have been wanting one bad with a tunnel ram for no apparent reason .

44th Miss Inf · 12-27-2018, 02:50 PM

I like the looks of it with the stock white 16" wheels.

Mathew21 · 12-28-2018, 03:05 PM

I love it, Great job!

12-19-2018, 07:37 PM	#1
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Dually conversion done I know its not much to look at yet but the dually conversion in my c30 is done. 5/7 drop with ridetech aol in the rear. Next up will be some new wheels , fitech, then paint. Attached Images __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually Last edited by cochino12; 12-19-2018 at 09:54 PM.

12-19-2018, 07:43 PM	#2
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: Dually conversion almost done nice truck . love the swap over to drw look . and do your self a huge favor learn from others like me and read up on each efi system . i have had nothing but problems with holley sniper . i have read a lot since my problems started and of the 3 kits from holley sniper / fitech / edelbrock pro flo 4 ....... the edelbrock wins in my book so far if i picked again . i have a thread in the engine section here if you wish to read it . and its the short version of all my info . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

12-19-2018, 09:40 PM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,249	Re: Dually conversion almost done I like it. Regular cab squarebody dually is the way to go! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-19-2018, 11:19 PM	#4
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,525	Re: Dually conversion almost done X2 on what Sweetk30 said. I've nothing but bad experience with Holley and fitech. Consider Edelbrock Pro-flo.

12-19-2018, 11:44 PM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Dually conversion almost done Any progress pics of installing the rear dually fenders on a standard bed? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-20-2018, 11:02 AM	#7
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: Dually conversion almost done I'm diggin' it.....Well done! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-20-2018, 05:25 PM	#10
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Dually conversion almost done Thanks for the pics. Did you swap in a DRW rearend? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-21-2018, 12:07 AM	#14
3drburb Registered User Join Date: Jul 2011 Location: Kent, WA. Posts: 858	Re: Dually conversion almost done That is nice! I like the look with the clean painted white wheels.

12-27-2018, 01:39 PM	#16
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: Dually conversion almost done i like this too, not sure id feel safe stretching a 22 over a 22.5 wheel though Attached Images __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

12-27-2018, 02:09 PM	#17
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,635	Re: Dually conversion almost done Nice job, and it looks good. I have been wanting one bad with a tunnel ram for no apparent reason .

12-27-2018, 02:50 PM	#18
44th Miss Inf Registered User Join Date: Sep 2002 Location: Liberty, Mississippi Posts: 672	Re: Dually conversion almost done I like the looks of it with the stock white 16" wheels.

12-28-2018, 03:05 PM	#19
Mathew21 Registered User Join Date: May 2010 Location: Clinton township, MI Posts: 1,192	Re: Dually conversion almost done I love it, Great job! __________________ It only has original paint once



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.