NJ WTB: Pre bent fuel line - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 01-26-2019, 02:20 PM

Need a pre bent fuel line for a sbc fuel pump to a 4 barrel carb (3/8" line). Getting lazy in my old age, hoping someone has one laying around.

Any info & pics would be appreciated.

Thanks
Scott

**richard2717** · 01-26-2019, 02:35 PM

Scott
I have this one from a 72 blazer I parted out. It was already removed and laying in it but I have no reason to doubt it did not come from it. It had a 350. I took it out to my 72 longhorn that still has all the factory equipment on it and that motor has the real tall fuel pump on it and the lower section of line is bent different. If you have the tall pump this will not work (I don't think so anyway)
I need to make sure I can get the line out of the pump without damage. It may be later today before I get that far, have to set my vise back up

Richard

.

**ScottH** · 01-26-2019, 05:24 PM

Thanks Richard, looks like it would work.
LMK how u make out.

**KSCHEVYUP** · 01-27-2019, 10:59 AM

Scott-
If Richards line doesn't work out you might check out Inline Tube web site
part number CTC7103 pump to carb 3/8" fuel line for $20

Ron

**richard2717** · 01-27-2019, 11:00 AM

Scott,
Got it off this morning. Both nuts spin free. I could do $40 shipped

.

**ScottH** · 01-27-2019, 11:29 AM

Thanks guys, think I will try making one after all.

**richard2717** · 01-27-2019, 12:55 PM

Yea I figured as much, shipping was over half because of the box size

01-26-2019, 02:20 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	WTB: Pre bent fuel line Need a pre bent fuel line for a sbc fuel pump to a 4 barrel carb (3/8" line). Getting lazy in my old age, hoping someone has one laying around. Any info & pics would be appreciated. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-26-2019, 02:35 PM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: WTB: Pre bent fuel line Scott I have this one from a 72 blazer I parted out. It was already removed and laying in it but I have no reason to doubt it did not come from it. It had a 350. I took it out to my 72 longhorn that still has all the factory equipment on it and that motor has the real tall fuel pump on it and the lower section of line is bent different. If you have the tall pump this will not work (I don't think so anyway) I need to make sure I can get the line out of the pump without damage. It may be later today before I get that far, have to set my vise back up Richard . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-26-2019, 05:24 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Pre bent fuel line Thanks Richard, looks like it would work. LMK how u make out. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-27-2019, 10:59 AM	#4
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: WTB: Pre bent fuel line Scott- If Richards line doesn't work out you might check out Inline Tube web site part number CTC7103 pump to carb 3/8" fuel line for $20 Ron __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck) Last edited by KSCHEVYUP; 01-27-2019 at 11:01 AM. Reason: correct part number

01-27-2019, 11:00 AM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: WTB: Pre bent fuel line Scott, Got it off this morning. Both nuts spin free. I could do $40 shipped . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-27-2019, 11:29 AM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Pre bent fuel line Thanks guys, think I will try making one after all. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-27-2019, 12:55 PM	#7
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: WTB: Pre bent fuel line Yea I figured as much, shipping was over half because of the box size __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.