Wheel polishing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 11-24-2003, 08:46 PM

Got the metal polish you guys recomended. Works great but damn that is hard work.

Any thoughts on easy ways to do it from guys who have done it?

Thanks.

P.S. any way to get the pits out?

Thanks again

**N2TRUX** · 11-24-2003, 11:06 PM

The pits are"the pits". No, there is no way to remove anything more than minor surface blemishes. Rather than do it by hand, you can get a buffing wheel for your electric drill. No matter how you do it, it's not much fun....

Low87 · 11-25-2003, 10:55 AM

Best metal polish I have ever found is Xtreme. Used to be able to buy it around here, but this summer I couldn't find it. Finally found a guy online and me and Dave split a case of it. Awesome stuff!

**N2TRUX** · 11-25-2003, 11:04 AM

Quote:

Originally posted by Low87
Best metal polish I have ever found is Xtreme.....

I used Extreme for a long time too. My tire/wheel supplier alwys gave me a fresh can when I came in. It is good stuff, but I have found something better.

Try Master-Formula when you get a chance. You will be very impressed with how much better it works.

They sell it online, and at a lot of bigger car shows and swap meets. A buddy of mine convinced me to try it, and I am very pleased with the results.

76bonanza · 11-25-2003, 08:21 PM

Yes
master formula is what i got just inquiring about easy was to aplly it and remove it with best results.

Low87 · 11-26-2003, 02:07 PM

Quote:

Originally posted by N2TRUX
Try Master-Formula when you get a chance. You will be very impressed with how much better it works.

Will do, thanks for the tip! But, not going to even look at it until I'm done with my Xtreme. If Master-Formula is that much better, I'll wind up with 6 cans of Xtreme just sitting there.

11-24-2003, 08:46 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Wheel polishing Got the metal polish you guys recomended. Works great but damn that is hard work. Any thoughts on easy ways to do it from guys who have done it? Thanks. P.S. any way to get the pits out? Thanks again __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

11-24-2003, 11:06 PM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	The pits are"the pits". No, there is no way to remove anything more than minor surface blemishes. Rather than do it by hand, you can get a buffing wheel for your electric drill. No matter how you do it, it's not much fun.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-25-2003, 10:55 AM	#3
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Best metal polish I have ever found is Xtreme. Used to be able to buy it around here, but this summer I couldn't find it. Finally found a guy online and me and Dave split a case of it. Awesome stuff! __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

11-25-2003, 08:21 PM	#5
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Yes master formula is what i got just inquiring about easy was to aplly it and remove it with best results. __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.