GA 72 disc brake frontend, half ton

[Madkidd007]

From a 72 suburban c10, will cut frame as pictured below. Picture is not of actual front end but is identical. Will get detailed pictures of any specific areas at request. Rotor to rotor, calipers, crossmember, control arms, and steering linkage, idler arm, pitman arm.
Only thing I am keeping is the power steering box

$200 picked up
First I’ll take it gets it

If no buyers for complete I may sell just the spindles but shipping won’t be cheap due to weight(plus I don’t really wanna deal with taking it apart)

[Madkidd007]

And pics of actual setup. As with every part of this thing covered in dirt but not rusted out. Rotors are grooves so new price, bright flash makes it look worse
$160 picked up

[67ratswb]

hi, may be interested in calipers if you part it. thanks. mike

[Madkidd007]

Originally Posted by 67ratswb

hi, may be interested in calipers if you part it. thanks. mike

I’ll keep it in mind. Not to try to turn down a potential sale but I’d think after shipping it would equal what core cost would be

[Madkidd007]

$150 picked up for all of it. If not I’ll pull the spindles and scrap the rest this week

[67ratswb]

hi, still interested in the calipers. I think they will fit in a large uspo flat rate box for 14.00 or something like that. so it would just be a matter of what you want for them. if you pull it apart please send me a picture of them. thanks. mike

[Madkidd007]

Originally Posted by 67ratswb

hi, still interested in the calipers. I think they will fit in a large uspo flat rate box for 14.00 or something like that. so it would just be a matter of what you want for them. if you pull it apart please send me a picture of them. thanks. mike

Large flat rate is 18 this year as I sent something yesterday, the medium may work because there are two different sizes but unsure. I’ll do $44 shipped. That’s core price, plus shipping, plus Paypal fee.

[Madkidd007]

Last price drop. $125 picked up.
Started get thing ready for a scrap run, saving this till last

[Madkidd007]

Made my scrap run but didn’t take the front end apart. All available still.

[Madkidd007]

Ttt

[SIXTY9]

Do you happen to have the rear end ? If so would you sell the T fitting off of it for the rear brakes?

Thanks,
Wally

[michael bustamante]

id be interested in the steering link center link

[Madkidd007]

Originally Posted by SIXTY9

Do you happen to have the rear end ? If so would you sell the T fitting off of it for the rear brakes?

Thanks,
Wally

Rear was sold to another member already

[Madkidd007]

Originally Posted by michael bustamante

id be interested in the steering link center link

I would think $40 plus shipping being you can’t get it aftermarket I think that’s about right but if you don’t agree feel free to pm me

[michael bustamante]

pm sending

[w314speed]

I can do $100 for the frame cut as described. If you have sold the center link, it will be hard to load in a trailer? Do you have a way to load into a 5x10 trailer? Will the tires and wheels be included? LMK PayPal info?

[Madkidd007]

Originally Posted by w314speed

I can do $100 for the frame cut as described. If you have sold the center link, it will be hard to load in a trailer? Do you have a way to load into a 5x10 trailer? Will the tires and wheels be included? LMK PayPal info?

I have drug them on and off trailers by hand, easier offload is to strap it to a floor jack. Wheels and tires don’t go as they are aluminum and worth a little in scrap but can use them to roll it up on the trailer. I sent Michael a reply and just waiting to hear back. I’ll update the thread tomorrow when I know.

[Madkidd007]

Originally Posted by w314speed

I can do $100 for the frame cut as described. If you have sold the center link, it will be hard to load in a trailer? Do you have a way to load into a 5x10 trailer? Will the tires and wheels be included? LMK PayPal info?

I can do your offer if you want. Unfortunately only Saturday afternoon will I be available this weekend. If the center link is still available at the time of purchase I’ll take the $125 I was asking with the center link included if you need it

[Madkidd007]

Center link sold, $100 for the rest

[Madkidd007]

Ttt, willing to separate and ship the rest. Name your part and I’ll name your price

[Madkidd007]

Bump, $100 for everything or whatever you want taken off. Will seperate parts for free and ship at your expense.

[Madkidd007]

Ttt

[Madkidd007]

Been too lazy to tear it apart and store the pieces. $80 for what’s left

[Madkidd007]

Still haven’t moved it, so a bump

[Madkidd007]

Still sitting in the same place, really don’t wanna scrap it