TN 1972 4x4 Complete 350/350 Engine (locked up)

[hotsam]

Will be slowly parting out the 72 k10 chassis I bought to repair mine. Condition UNKNOWN of this engine. It has sat out in weather uncovered and is LOCKED UP. It is the original engine to the truck and is a 0010 block and has the correct block code for a 72 K10/K20 with automatic trans. I would like to sell it complete to someone that needs all but I realize that a part out is probably more likely.. So I took pics and will try to price what can be seen. If a part is not on the list just ask please. I just want to help out anyone I can and get rid of what I don’t need. I do not receive payment by PayPal so a payment by mail will be how I will do it I guess. I do not ever sell, so I may need some assistance on the best way on payment end. I do not have time to ship or run heavy items as we are building a house. So big items will have to be picked up locally. Again I will assist any way I can. This complete engine would be a gamble but I would probably take the chance if I was doing a “numbers restoration”.

Complete Engine price 150.00 picked up
Passenger side Exhaust manifold - 20.00 + shipping
Lower alt. Bracket- 20.00+ shipping
Lower power steering bracket- 20.00+ shipping
Quadra jet Intake manifold- 20.00+shipping
Points distributor - 25.00 + shipping
I am going to try to get this dismantled and take better pics of each piece. I searched and tried to price accordingly but just let me know if there’s anything you see of interest. There will be other posts with some other items as well. Thanks.

I NEED

1. Set of 69-72 1/2 ton hubcaps. Good driver set. Don’t care If chrome or painted. I will modify for 4wd.
2. Set of 6 lug steel wheels for my 4x4... I want the steel and hubcap look.

[hotsam]

Picture

[hotsam]

Pictures

[Eagle9502]

I'd be interested in the following if you have them:

-original dipstick and tube
-original GM water pump
-original turbo 350 torque converter dust cover

[hotsam]

Originally Posted by Eagle9502

I'd be interested in the following if you have them:

-original dipstick and tube
-original GM water pump
-original turbo 350 torque converter dust cover

I’m thinking that’s all a “NO-GO” but will check and let you know. Thanks

[Getter-Done]

Would like quote on manifolds to 37090

[hotsam]

Originally Posted by Getter-Done

Would like quote on manifolds to 37090

Got it. Could you advise me as the best way to figure this ? UPS , USPS, or Fed ex ?? This is all a first for me. Any advise is appreciated !! Thanks I will put them on the scale and let you know

[hotsam]

Originally Posted by Getter-Done

Would like quote on manifolds to 37090

I think we talked before in a thread.. If your close to sevierville I get down that way every now and then..
Edit: I looked your WAYYY west of sevierville..LOL sorry

[Getter-Done]

Originally Posted by hotsam

I think we talked before in a thread.. If your close to sevierville I get down that way every now and then..
Edit: I looked your WAYYY west of sevierville..LOL sorry

Yes 😂
I will Pm soon as I get home

[dirish]

Is there a steel upper radiator pipe? Shipped to 37090
Thanks

[painterljp]

I will take the curved thingy bolted on front of water pump. To 87107. Thanks. USPS flat rate boxes are usually the cheapest way to ship. Mine would fit in padded envelope. And any wire holders that are on the sides of oil pan. To hold plug wires.

[hotsam]

Originally Posted by dirish

Is there a steel upper radiator pipe? Shipped to 37090
Thanks

Sorry steel pipe is gone... I would have liked to have that for myself !! Thanks

[hotsam]

Originally Posted by painterljp

I will take the curved thingy bolted on front of water pump. To 87107. Thanks. USPS flat rate boxes are usually the cheapest way to ship. Mine would fit in padded envelope. And any wire holders that are on the sides of oil pan. To hold plug wires.

I will check all this and what’s there is yours. We will discuss a fair price for all when I see what of those I have along with it. Out of curiosity , What might this water pump bracket even be for ?? Thanks

[painterljp]

Not sure but I dont have one and would like this one??? I know thermostat wire runs along intake I think. Not sure am sure someone else knows. I know wire holders on pan are for plug wires. There should be some on each side of oil pan.

[hotsam]

Originally Posted by painterljp

Not sure but I dont have one and would like this one??? I know thermostat wire runs along intake I think. Not sure am sure someone else knows. I know wire holders on pan are for plug wires. There should be some on each side of oil pan.

That’s awesome !! But I Don’t have one and would like this one.... That’s how I ended up with all this excessive amount of stuff !!! At least this and small parts will fit in a drawer or on a shelf not all over the front yard !! Lol Will get info asap

[flashed]

I have a set of 15x8 6 lug steel wheels with good tires for $500 picked up in North Ga or 5 Powder Coated 15x8 6 lug steel wheels for $125 each picked up .

[Bones72Super]

Interested in the transmission if you would ship . Reverse is gone in the TH350 in my 72 K2500. I have shipped many things through fastenal including anvils, engines and transmissions. I would arrange shipping all you would have to do is put it on a pallet and drop it off at Fastenal

[hotsam]

Originally Posted by Bones72Super

Interested in the transmission if you would ship . Reverse is gone in the TH350 in my 72 K2500. I have shipped many things through fastenal including anvils, engines and transmissions. I would arrange shipping all you would have to do is put it on a pallet and drop it off at Fastenal

Im keeping this setup to convert mine to auto. Thanks though

[hotsam]

Originally Posted by painterljp

I will take the curved thingy bolted on front of water pump. To 87107. Thanks. USPS flat rate boxes are usually the cheapest way to ship. Mine would fit in padded envelope. And any wire holders that are on the sides of oil pan. To hold plug wires.

The weather has been nasty here today and to add to it my phone has been giving me a fit. But I will get to those brackets tomorrow. I looked and looks like the only plug wire brackets that are there are bolted to the block both sides directly behind the cylinder heads. They look factory. I will look closer when I can throw something over the mud to lay on. Will get pics of those too

[Eagle9502]

Hotsam, how about factory exhaust hanger brackets from the frame and/or 71/72 Chevy 4wd front bumper brackets?

[hotsam]

Originally Posted by Eagle9502

Hotsam, how about factory exhaust hanger brackets from the frame and/or 71/72 Chevy 4wd front bumper brackets?

I know there are some hangers on the frame and look to be in good shape. Its a long bed chassis. I have one front bumper bracket and it may possibly be bent. Pics ASAP. Will do my best by 8 am in morning if rain stops. Thanks

[hotsam]

Originally Posted by flashed

I have a set of 15x8 6 lug steel wheels with good tires for $500 picked up in North Ga or 5 Powder Coated 15x8 6 lug steel wheels for $125 each picked up .

Thanks Flashed ! If I get down that way I may look you up...

[hotsam]

Originally Posted by Getter-Done

Would like quote on manifolds to 37090

Heres a manifold pic. Check it out good. The driver side was cracked across the back. This is passenger and has broken studs but May clean up. Im not sure That I would choose it for a project but I dont sweat original parts very much. If you want it lets say 20.00 plus shipping. Sorry I just got in the garage for pics and to look them over this morning.

[Grumpy old man]

Are you in Sevierville ? PM sent

[Getter-Done]

Originally Posted by hotsam

Heres a manifold pic. Check it out good. The driver side was cracked across the back. This is passenger and has broken studs but May clean up. Im not sure That I would choose it for a project but I dont sweat original parts very much. If you want it lets say 20.00 plus shipping. Sorry I just got in the garage for pics and to look them over this morning.

hotsam
I think I will pass on the manifold.
Thanks for the pics.
I am sure someone will want it the GM on it still looks good.
And yes : We talked in your pondarosa thread.
I'll keep watching for other parts.
Thanks again

.