![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Active Member
![]() Join Date: Nov 2018
Location: SHERWOOD PARK, AB
Posts: 113
|
Low Hump Floor and Manual Transmission
My 69 is a high hump floor that turns out is in much rougher shape than expected. I found a good deal on complete low hump floor assembly. I'm wondering how much cutting of a low hump floor is required to run a floor shift trans? I'm likely going to be putting a TKO in it or a T56. Is it as simple as cutting a hole for the shifter, or would I be better off cutting up the floor and modifying it to accept the high hump?
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2009
Location: Space Coast, Fl.
Posts: 1,050
|
Re: Low Hump Floor and Manual Transmission
My Blazer has a low hump & a TKO with no mod. to the floor.... except for the hole for the shifter.
__________________
Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!! |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2018
Location: St. James, MN
Posts: 163
|
Re: Low Hump Floor and Manual Transmission
The replacement floor I just bought has markings stamped into it to cut out the low hump for the high hump. I don't think it will be any trouble.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2018
Location: EL PASO
Posts: 96
|
Re: Low Hump Floor and Manual Transmission
I cut out my low hump and put in a bolt in steel high hump. Pretty straight forward, pics in the link.
https://photos.app.goo.gl/suN7jsh4uRJqrdzN8 |
![]() |
![]() |
![]() |
#5 | |
Active Member
![]() Join Date: Nov 2018
Location: SHERWOOD PARK, AB
Posts: 113
|
Re: Low Hump Floor and Manual Transmission
Quote:
|
|
![]() |
![]() |
![]() |
Bookmarks |
|
|