1976 spid sheet location? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**straight6chevyguy** · 04-22-2019, 04:13 PM

Ok I know this sounds stupid but where is the spid sheet location in my 1976 c10?
I can't seem to find one in the glove box any where and I don't see any remains of one either. Maybe its missing or I just have over looked it?

Ad Cam · 04-22-2019, 06:17 PM

My '76 has it on the glove box door.

**hatzie** · 04-22-2019, 06:40 PM

Look on the inner fenders in the engine bay. Some 73-76 trucks had em there.

**straight6chevyguy** · 04-22-2019, 10:23 PM

Ok I got out and looked but nothing in the glove box but the sticker that says do not push or pull this vehicle to start it... bla bla whatever.

All so looked under the hood but nothing but spare tire instructions and vehicle
emissions info.

I'm guessing that it's long gone?

**jocko** · 04-22-2019, 10:43 PM

My 76's was inside the gb door. If it's in the engine compartment, it's normally on the driver's side wheelwell, a little bit in front of the hood hinge/master cylinder area.

cadillac_al · 04-23-2019, 08:03 AM

I never saw a 76 with the sticker in the glove box. That would make too much sense. All of mine had them on the inner fenders.

**jocko** · 04-23-2019, 07:58 PM

Quote:

Originally Posted by cadillac_al

I never saw a 76 with the sticker in the glove box. That would make too much sense. All of mine had them on the inner fenders.

Thar she blows!

**straight6chevyguy** · 04-23-2019, 11:35 PM

Well I looked again today but found nothing... So thanks guys for the help but at this point
I think it's gone.

Thanks again!

**hatzie** · 04-25-2019, 09:38 AM

I found a build sheet stuffed in the seat springs. The paper was very brittle and the seat was from a 1980 the build sheet was not for my 76 pickup. If your seat hasn't been swapped you may find a build sheet there.

Pontiac1976 · 04-27-2019, 10:34 AM

I bet if it was on the glove box it fell off or some one changed the glove box liner because hinge broke.

**straight6chevyguy** · 05-27-2019, 04:48 PM

Well I found a sheet of paper under the seat.
It's crumbling apart but most of it is there.

If any body is interested in it I will be posting some pics of it in my build thread in a day or so. (I still have to take some pictures)

04-22-2019, 04:13 PM	#1
straight6chevyguy Senior Member Join Date: Dec 2018 Location: yamhill OR Posts: 909	1976 spid sheet location? Ok I know this sounds stupid but where is the spid sheet location in my 1976 c10? I can't seem to find one in the glove box any where and I don't see any remains of one either. Maybe its missing or I just have over looked it? __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1978 chevy c20 350 4speed 1998 chevy c1500 4.3L 5speed 2002 Chevy s10 4.3L auto 4x4 Plus a Mercury & some Fords... To many projects!

04-22-2019, 06:17 PM	#2
Ad Cam Registered User Join Date: Jul 2017 Location: Downers Grove, IL Posts: 205	Re: 1976 spid sheet location? My '76 has it on the glove box door.

04-22-2019, 06:40 PM	#3
hatzie Moderator Join Date: Oct 2008 Location: Wentworth, NH Posts: 4,977	Re: 1976 spid sheet location? Look on the inner fenders in the engine bay. Some 73-76 trucks had em there. __________________ 1959 M35A2 LDT465-1D SOLD 1967 Dodge W200 B383, NP420/NP201 SOLD 1969 Dodge Polara 500 B383, A833 SOLD 1972 Ford F250 FE390, NP435/NP205 SOLD 1976 Chevy K20, 6.5L, NV4500/NP208 SOLD 1986 M1008 CUCV SOLD 2000 GMC C2500, TD6.5L, NV4500 2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263 2009 Impala SS LS4 V8 RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials... 1973-1991 GM Light Truck Service, Unit/Overhaul, Wiring Manuals, Parts Books and Some 1968-1999 GM Service Training textbooks in PDF 1988-1998 GMT400 CK service manual project 1988-1993 GMT400 CK parts books. 1967-1972 GM Light, Medium, & Heavy Truck Service Manuals in PDF Please include at least the year and model in your threads. It'll be easier to answer your questions. And please let us know if and how your repairs were successful.

04-22-2019, 10:23 PM	#4
straight6chevyguy Senior Member Join Date: Dec 2018 Location: yamhill OR Posts: 909	Re: 1976 spid sheet location? Ok I got out and looked but nothing in the glove box but the sticker that says do not push or pull this vehicle to start it... bla bla whatever. All so looked under the hood but nothing but spare tire instructions and vehicle emissions info. I'm guessing that it's long gone? __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1978 chevy c20 350 4speed 1998 chevy c1500 4.3L 5speed 2002 Chevy s10 4.3L auto 4x4 Plus a Mercury & some Fords... To many projects!

04-22-2019, 10:43 PM	#5
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: 1976 spid sheet location? My 76's was inside the gb door. If it's in the engine compartment, it's normally on the driver's side wheelwell, a little bit in front of the hood hinge/master cylinder area.

04-23-2019, 08:03 AM	#6
cadillac_al Registered User Join Date: Oct 2013 Location: Maine Posts: 2,375	Re: 1976 spid sheet location? I never saw a 76 with the sticker in the glove box. That would make too much sense. All of mine had them on the inner fenders. __________________ 76 Chevy K20 76 GMC K15 77 Chevy C10 77 Chevy K10

04-23-2019, 11:35 PM	#8
straight6chevyguy Senior Member Join Date: Dec 2018 Location: yamhill OR Posts: 909	Re: 1976 spid sheet location? Well I looked again today but found nothing... So thanks guys for the help but at this point I think it's gone. Thanks again! __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1978 chevy c20 350 4speed 1998 chevy c1500 4.3L 5speed 2002 Chevy s10 4.3L auto 4x4 Plus a Mercury & some Fords... To many projects!

04-25-2019, 09:38 AM	#9
hatzie Moderator Join Date: Oct 2008 Location: Wentworth, NH Posts: 4,977	Re: 1976 spid sheet location? I found a build sheet stuffed in the seat springs. The paper was very brittle and the seat was from a 1980 the build sheet was not for my 76 pickup. If your seat hasn't been swapped you may find a build sheet there. __________________ 1959 M35A2 LDT465-1D SOLD 1967 Dodge W200 B383, NP420/NP201 SOLD 1969 Dodge Polara 500 B383, A833 SOLD 1972 Ford F250 FE390, NP435/NP205 SOLD 1976 Chevy K20, 6.5L, NV4500/NP208 SOLD 1986 M1008 CUCV SOLD 2000 GMC C2500, TD6.5L, NV4500 2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263 2009 Impala SS LS4 V8 RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials... 1973-1991 GM Light Truck Service, Unit/Overhaul, Wiring Manuals, Parts Books and Some 1968-1999 GM Service Training textbooks in PDF 1988-1998 GMT400 CK service manual project 1988-1993 GMT400 CK parts books. 1967-1972 GM Light, Medium, & Heavy Truck Service Manuals in PDF Please include at least the year and model in your threads. It'll be easier to answer your questions. And please let us know if and how your repairs were successful.

04-27-2019, 10:34 AM	#10
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 766	Re: 1976 spid sheet location? I bet if it was on the glove box it fell off or some one changed the glove box liner because hinge broke. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

05-27-2019, 04:48 PM	#11
straight6chevyguy Senior Member Join Date: Dec 2018 Location: yamhill OR Posts: 909	Re: 1976 spid sheet location? Well I found a sheet of paper under the seat. It's crumbling apart but most of it is there. If any body is interested in it I will be posting some pics of it in my build thread in a day or so. (I still have to take some pictures) __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1978 chevy c20 350 4speed 1998 chevy c1500 4.3L 5speed 2002 Chevy s10 4.3L auto 4x4 Plus a Mercury & some Fords... To many projects!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.