GA WTB: 4x4 dipstick and heat stove - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**IronCanine** · 04-25-2019, 05:19 PM

I know a similar post was recently placed with no action...but after exhausting all avenues I too have arrived at a WTB post. Hope I get lucky and it falls under the right eyes. As pictured, I'm looking for a curved 4x4 dipstick, tube and manifold stud as well as a non emissions heat stove set up. Condition will of heat stove will matter.

Thanks in advance...

Brad

**DeadheadNM** · 04-25-2019, 08:59 PM

Hi Brad - I might have a spare of each, I’ll dig this weekend. Let me know if you need anything else buddy.

**IronCanine** · 04-25-2019, 11:08 PM

Pete...it goes without saying at this point....but you are the absolute best. I'll wait to hear. Thanks my friend.

**BlazerBill** · 04-26-2019, 01:43 AM

Brad that is a beautiful engine! Is that a Bob Stone carburetor? Hope Pete has what you need.
B.B.

**IronCanine** · 04-26-2019, 03:00 AM

Quote:

Originally Posted by BlazerBill

Brad that is a beautiful engine! Is that a Bob Stone carburetor? Hope Pete has what you need.
B.B.

Thanks. Sean Murphy did it. That's my Blazer from a few years back. Just got the QJ back for our current project. He did it too and it looks just as good.

Super Dude · 04-26-2019, 01:12 PM

Hi. I was looking for that same dipstick for my 71 Cheyenne 4x project I recently purchased. I was in a wrecking yard recently, and come across a C50 in those years. Lifted the hood, and the 350 that was in there had one on it. Lucky me. Either someone put the engine in there out of a 4x or they come on the 350 engines in those trucks. Give you another avenue to find one. Good luck.

Super Dude · 04-26-2019, 01:20 PM

Hi. I was looking for that same dipstick for my 71 Cheyenne 4x project I recently purchased. I was in a wrecking yard recently, and come across a C50 in those years. Lifted the hood, and the 350 that was in there had one on it. Lucky me. Either someone put the engine in there out of a 4x or they come on the 350 engines in those trucks. Give you another avenue to find one. Good luck.

**IronCanine** · 04-26-2019, 02:51 PM

Quote:

Originally Posted by Super Dude

Hi. I was looking for that same dipstick for my 71 Cheyenne 4x project I recently purchased. I was in a wrecking yard recently, and come across a C50 in those years. Lifted the hood, and the 350 that was in there had one on it. Lucky me. Either someone put the engine in there out of a 4x or they come on the 350 engines in those trucks. Give you another avenue to find one. Good luck.

Thanks for the tip. Lately it seems like Oregon has all the best stuff.

**DeadheadNM** · 04-27-2019, 07:53 AM

PM sent

04-25-2019, 05:19 PM	#1
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,746	WTB: 4x4 dipstick and heat stove I know a similar post was recently placed with no action...but after exhausting all avenues I too have arrived at a WTB post. Hope I get lucky and it falls under the right eyes. As pictured, I'm looking for a curved 4x4 dipstick, tube and manifold stud as well as a non emissions heat stove set up. Condition will of heat stove will matter. Thanks in advance... Brad Attached Images __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

04-25-2019, 08:59 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: WTB: 4x4 dipstick and heat stove Hi Brad - I might have a spare of each, I’ll dig this weekend. Let me know if you need anything else buddy. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-25-2019, 11:08 PM	#3
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,746	Re: WTB: 4x4 dipstick and heat stove Pete...it goes without saying at this point....but you are the absolute best. I'll wait to hear. Thanks my friend. __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

04-26-2019, 01:43 AM	#4
BlazerBill Senior Member Join Date: Apr 2013 Location: Northern ca. Wine country Posts: 405	Re: WTB: 4x4 dipstick and heat stove Brad that is a beautiful engine! Is that a Bob Stone carburetor? Hope Pete has what you need. B.B.

04-26-2019, 01:12 PM	#6
Super Dude Registered User Join Date: Sep 2018 Location: Springfield Oregon Posts: 112	Re: WTB: 4x4 dipstick and heat stove Hi. I was looking for that same dipstick for my 71 Cheyenne 4x project I recently purchased. I was in a wrecking yard recently, and come across a C50 in those years. Lifted the hood, and the 350 that was in there had one on it. Lucky me. Either someone put the engine in there out of a 4x or they come on the 350 engines in those trucks. Give you another avenue to find one. Good luck. __________________ 1972 Cheyenne Super SWB 2wd 402 Orange & White 1971 Cheyenne 3/4 4wd Black & White 1972 Cheyenne Super 1/2 LWB 2wd 402 Red & White 1968 Chevelle SS 396 L78

04-26-2019, 01:20 PM	#7
Super Dude Registered User Join Date: Sep 2018 Location: Springfield Oregon Posts: 112	Re: WTB: 4x4 dipstick and heat stove Hi. I was looking for that same dipstick for my 71 Cheyenne 4x project I recently purchased. I was in a wrecking yard recently, and come across a C50 in those years. Lifted the hood, and the 350 that was in there had one on it. Lucky me. Either someone put the engine in there out of a 4x or they come on the 350 engines in those trucks. Give you another avenue to find one. Good luck. __________________ 1972 Cheyenne Super SWB 2wd 402 Orange & White 1971 Cheyenne 3/4 4wd Black & White 1972 Cheyenne Super 1/2 LWB 2wd 402 Red & White 1968 Chevelle SS 396 L78

04-27-2019, 07:53 AM	#9
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: WTB: 4x4 dipstick and heat stove PM sent __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.