Stuff F.S. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LeRoy · 11-27-2003, 03:35 PM

-1969 327 V8, Large journal crank, came out of 69 Impalla so had a 2 BBL. and no camel hump heads. Ran good, motor had 97K miles and was bought from original owner. Partially disasembled $300 OBO
-1970 6lug, 12 bolt rear, leaf sprung, 3.08 gears, I believe it has a stock limited slip in it, nice shape, complete from drum to drum $200 if your serious I'll pull the cover to verify the limited slip. This is the only year that you can swap out the 6 lug axles and put in 5 lug axles. Nice rear end for a daily highway driver.
-front Dana 44 axle, drum brakes, 3.08 gears, new warn hubs, has one new spindle and both sides have new bearings and races, nice shape, $100 OBO
-1965 rear Dana 44, 3.54 gears, nice shape, complete from drum to drum, non-posi, $50 OBO
-Two 68-72 bedsides, one drivers side and one passenger side, they need work, fixable or good for patch panels $20 obo
-blazer windshield frame, no rust, one bolt hole, for top hold down bracket is broke off $100 OBO
-Complete roof for 67-72 truck for rust repair, has been cut off at top of pillar and around rear by window $40

I don't have time to be shipping these item so unless I can drop it off local or you pick it up, your out of luck. Sorry

stelth2002 · 11-27-2003, 04:28 PM

Leroy, didnt you have the inline? I would also be interested in the 308 axle possibly. How far to the east do you make it?

stllookn · 11-27-2003, 04:40 PM

Geez...I'd really like to buy that 327 as a back-up for the one in the '70 Chevelle I haven't bought yet...LOL! I might need that rear end too!

723/4tontank · 11-27-2003, 05:32 PM

Hey, I could use a drivers side bed side. Is it in better shape then the one I have? Mines kinda smooshed right behind the cab.

Blue_71 · 11-27-2003, 10:54 PM

do you have a pic of the rims? how much without the tires? that is if i can find somebody near you who you could drop them off too who doesnt mind to ship (id like to have them with tires but thatd be a lil big)

LeRoy · 11-28-2003, 01:34 AM

723/4tontank- There's no major carnage on these bedsides but one does have a "Stress crack" by the wheel well, Probably some bondo here and there. When you come up we can check it out. The K5 is almost movable so.... 454 time

I've got an extra nice bedside but can't remember which side.

stelth2002- I've still got the inline. I haven't been outa state in a few years. If I can raise some cash. I might be headed to see WES in Olympia to get some drop spindles

Everyone else has been PM'd

LeRoy · 11-29-2003, 12:53 AM

ttt

LeRoy · 11-30-2003, 01:50 AM

ttt

723/4tontank · 12-01-2003, 04:21 AM

Alright, Just let me know when you are done.

LeRoy · 12-06-2003, 03:12 AM

ttt

*1tonswb* · 12-06-2003, 04:30 AM

Are the bedsides for a swb or lwb?

LeRoy · 12-07-2003, 12:12 PM

The bedsides are for a longbox

LeRoy · 12-12-2003, 12:13 PM

ttt

earl87gta · 12-13-2003, 01:17 AM

I could use the blazer window frame.
Earl

stelth2002 · 12-13-2003, 01:44 AM

Nevermind on the rear, i didnt read that it was leaf. But do you still have the inline. I might come up there someday.

LeRoy · 12-23-2003, 03:32 AM

ttt

LT 72 Jimmy · 01-12-2004, 11:32 AM

I've PM'd again about the WS frame

11-27-2003, 03:35 PM	#1
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	Stuff F.S. -1969 327 V8, Large journal crank, came out of 69 Impalla so had a 2 BBL. and no camel hump heads. Ran good, motor had 97K miles and was bought from original owner. Partially disasembled $300 OBO -1970 6lug, 12 bolt rear, leaf sprung, 3.08 gears, I believe it has a stock limited slip in it, nice shape, complete from drum to drum $200 if your serious I'll pull the cover to verify the limited slip. This is the only year that you can swap out the 6 lug axles and put in 5 lug axles. Nice rear end for a daily highway driver. -front Dana 44 axle, drum brakes, 3.08 gears, new warn hubs, has one new spindle and both sides have new bearings and races, nice shape, $100 OBO -1965 rear Dana 44, 3.54 gears, nice shape, complete from drum to drum, non-posi, $50 OBO -Two 68-72 bedsides, one drivers side and one passenger side, they need work, fixable or good for patch panels $20 obo -blazer windshield frame, no rust, one bolt hole, for top hold down bracket is broke off $100 OBO -Complete roof for 67-72 truck for rust repair, has been cut off at top of pillar and around rear by window $40 I don't have time to be shipping these item so unless I can drop it off local or you pick it up, your out of luck. Sorry __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me Last edited by LeRoy; 12-12-2003 at 12:12 PM.

11-27-2003, 04:28 PM	#2
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Leroy, didnt you have the inline? I would also be interested in the 308 axle possibly. How far to the east do you make it? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

11-27-2003, 04:40 PM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Geez...I'd really like to buy that 327 as a back-up for the one in the '70 Chevelle I haven't bought yet...LOL! I might need that rear end too! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 11-27-2003 at 04:48 PM.

11-27-2003, 05:32 PM	#4
723/4tontank One ugly but fast truck Join Date: Oct 2003 Location: Everett, Wa Posts: 104	Hey, I could use a drivers side bed side. Is it in better shape then the one I have? Mines kinda smooshed right behind the cab. __________________ 72 3/4 ton Fleetside. 468/th400. Motors in. Runs great! Will smoke the right rear all day long. Time for body work.

11-28-2003, 01:34 AM	#6
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	723/4tontank- There's no major carnage on these bedsides but one does have a "Stress crack" by the wheel well, Probably some bondo here and there. When you come up we can check it out. The K5 is almost movable so.... 454 time I've got an extra nice bedside but can't remember which side. stelth2002- I've still got the inline. I haven't been outa state in a few years. If I can raise some cash. I might be headed to see WES in Olympia to get some drop spindles Everyone else has been PM'd __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

11-29-2003, 12:53 AM	#7
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	ttt __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

11-30-2003, 01:50 AM	#8
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	ttt __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

12-01-2003, 04:21 AM	#9
723/4tontank One ugly but fast truck Join Date: Oct 2003 Location: Everett, Wa Posts: 104	Alright, Just let me know when you are done. __________________ 72 3/4 ton Fleetside. 468/th400. Motors in. Runs great! Will smoke the right rear all day long. Time for body work.

12-06-2003, 03:12 AM	#10
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	ttt __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

12-06-2003, 04:30 AM	#11
1tonswb Account Suspended Join Date: Nov 2003 Location: Oregon Posts: 300	Are the bedsides for a swb or lwb?

12-07-2003, 12:12 PM	#12
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	The bedsides are for a longbox __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

12-12-2003, 12:13 PM	#13
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	ttt __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

12-13-2003, 01:17 AM	#14
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	I could use the blazer window frame. Earl __________________ Earl 68 2500 4x4 GMC Burb

12-13-2003, 01:44 AM	#15
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Nevermind on the rear, i didnt read that it was leaf. But do you still have the inline. I might come up there someday. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

12-23-2003, 03:32 AM	#16
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	ttt __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me



Register or Log In To remove these advertisements.

01-12-2004, 11:32 AM	#17
LT 72 Jimmy Registered User Join Date: Sep 2002 Location: Arkansas Posts: 252	I've PM'd again about the WS frame

Register or Log In To remove these advertisements.