72 250 and transm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sledge_hammer · 11-28-2003, 12:40 AM

I have a 250 complete, carb to pan, starter, rad, and three speed trany, came out of a 72 C-10, ran well, but i think it at least needs the head done. Pulled it to put a chevelle 396 30 over into the truck. I drove the truck perhaps 20 miles, with the 6 in it. I live in Penticton BC. $400 canadian, that is, well lets see, about a flat of beer US....just joking. Can bring to the line at oroville if you need.

Also have 2 doors, rust on the bottom, but complete glass, and a hood, which has had a bit of putty in the front.

$100 for all of these.

350 early 80's 4 bolt, carb to pan, no starter, came out of running 72 parts truck. $350 canadian

and the grand prize

68 -350 and heads, from a 68 camaro, 20 over pistons. this came out of a 67 Canso project, I never ran this engine. Block, crank and heads match. email for price if going back into a 68 camaro,

sledge_hammer · 11-28-2003, 12:49 AM

i did not mention, with the 6 cyl, includes the manual steering box.

*Gee_Emm* · 11-28-2003, 01:05 AM

I dont need the engine but I would REALLY appreciate it if you could take a picture of the choke setup on the carb, I need to see how it is connected to the choke thermostat. Oh and if you have any power steering brackets for a 250 I need some of those too.

Thanks

sledge_hammer · 12-01-2003, 07:08 PM

350 engine is now sold.

rod

11-28-2003, 12:40 AM	#1
sledge_hammer Registered User Join Date: Nov 2003 Location: penticton bc Posts: 19	72 250 and transm I have a 250 complete, carb to pan, starter, rad, and three speed trany, came out of a 72 C-10, ran well, but i think it at least needs the head done. Pulled it to put a chevelle 396 30 over into the truck. I drove the truck perhaps 20 miles, with the 6 in it. I live in Penticton BC. $400 canadian, that is, well lets see, about a flat of beer US....just joking. Can bring to the line at oroville if you need. Also have 2 doors, rust on the bottom, but complete glass, and a hood, which has had a bit of putty in the front. $100 for all of these. 350 early 80's 4 bolt, carb to pan, no starter, came out of running 72 parts truck. $350 canadian and the grand prize 68 -350 and heads, from a 68 camaro, 20 over pistons. this came out of a 67 Canso project, I never ran this engine. Block, crank and heads match. email for price if going back into a 68 camaro, __________________ 72 C10 s/b s/s 396 T400

11-28-2003, 12:49 AM	#2
sledge_hammer Registered User Join Date: Nov 2003 Location: penticton bc Posts: 19	oh yeah, i did not mention, with the 6 cyl, includes the manual steering box. __________________ 72 C10 s/b s/s 396 T400

12-01-2003, 07:08 PM	#4
sledge_hammer Registered User Join Date: Nov 2003 Location: penticton bc Posts: 19	350 engine 350 engine is now sold. rod __________________ 72 C10 s/b s/s 396 T400

11-28-2003, 01:05 AM	#3
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	I dont need the engine but I would REALLY appreciate it if you could take a picture of the choke setup on the carb, I need to see how it is connected to the choke thermostat. Oh and if you have any power steering brackets for a 250 I need some of those too. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.