MO Back in bizness again.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 08-03-2019, 02:06 PM

Hey guys, it has been a while since I was able to get out and track one down. Those days are over, just drug this organ donor in. 72 Chevy, well optioned. It is still on the trailer but I am going to start on it. I CANNOT ship larger parts but no part is too small. First off, upper radiator brackets, $15.00 shipped. It also has a matching set of historical documents and tag [for display purposes only] that are available for purchase for $250.00. All prices I will be posting are shipped, so let the fun begin. Thanks, Fred.

Willys_MB · 08-03-2019, 02:10 PM

What mirrors does it have on it?

**tjmb1086** · 08-03-2019, 02:13 PM

Interested in the doors possibly if there not rusted out

**specialtyretail** · 08-03-2019, 02:32 PM

Quote:

Originally Posted by Willys_MB

What mirrors does it have on it?

SOLD,,,, THANKS.... It has these..... $48.00 shipped if you need them. Thanks, Fred.

**aotte1** · 08-03-2019, 02:32 PM

What size wheels does it have? 16s
Les

**specialtyretail** · 08-03-2019, 02:33 PM

Quote:

Originally Posted by tjmb1086

Interested in the doors possibly if there not rusted out

Typical rust and cannot ship them. Thanks, Fred.

Madkidd007 · 08-03-2019, 02:33 PM

I’d be interested in the ac control mounting bracket and center dash vent

**specialtyretail** · 08-03-2019, 02:39 PM

Quote:

Originally Posted by aotte1

What size wheels does it have? 16s
Les

C10, 15 inch wheels. Thanks, Fred.

**Tripmiester** · 08-03-2019, 02:40 PM

Fred, Looking for the wiring from the ribbon wire to the rear taillights if in tact and no splices
Also looking for the stock spark plug wire holders heat shields ect....
Steering midshaft as well if in good condition
Thanks Steve

Madkidd007 · 08-03-2019, 02:41 PM

Quote:

Originally Posted by Madkidd007

I’d be interested in the ac control mounting bracket and center dash vent

With attaching hardware or whatever is actually left

**specialtyretail** · 08-03-2019, 03:07 PM

Quote:

Originally Posted by Madkidd007

I’d be interested in the ac control mounting bracket and center dash vent

SOLD,,,, THANKS.... It has this. One bolt is broken off in the mounting bracket, but I do have the screws. Center vent is intact. $45.00 shipped for all of it. Thanks, Fred.

Madkidd007 · 08-03-2019, 03:18 PM

Quote:

Originally Posted by specialtyretail

It has this. One bolt is broken off in the mounting bracket, but I do have the screws. Center vent is intact. $45.00 shipped for all of it. Thanks, Fred.

Man you’re quick. Let me skip on the bracket and just do the vent. Give me a fresh total and as always I’ll get you paid immediately with no rush to ship on your end

**specialtyretail** · 08-03-2019, 03:21 PM

Quote:

Originally Posted by Tripmiester

Fred, Looking for the wiring from the ribbon wire to the rear taillights if in tact and no splices
Also looking for the stock spark plug wire holders heat shields ect....
Steering midshaft as well if in good condition
Thanks Steve

I have these. $28.00 shipped for all four. Thanks, Fred.

**specialtyretail** · 08-03-2019, 03:22 PM

Quote:

Originally Posted by Madkidd007

Man you’re quick. Let me skip on the bracket and just do the vent. Give me a fresh total and as always I’ll get you paid immediately with no rush to ship on your end

How about $22.00 shipped on the vent assembly. Thanks, Fred.

Madkidd007 · 08-03-2019, 03:50 PM

Quote:

Originally Posted by specialtyretail

How about $22.00 shipped on the vent assembly. Thanks, Fred.

Paid, assuming trim is considered too big to ship items? If that’s the case if you do remove it I’d be interested in a LOT of clips

**specialtyretail** · 08-03-2019, 03:54 PM

Quote:

Originally Posted by Madkidd007

Paid, assuming trim is considered too big to ship items? If that’s the case if you do remove it I’d be interested in a LOT of clips

Got somebody SUPPOSED to be on the bed. If it falls through, I will see about clips. Thanks, Fred.

68Gold/white · 08-03-2019, 04:10 PM

Fred,
Something I've been thinking about....I plan to install manual disc brakes on my 67 and 68 when complete. I have one, for sure master cylinder with the proportioning valve and lines (I cut the lines below the valve. It will need a new m/cyl when I go to install............

I would like to purchase another m/cyl with proportioning valve setup as I just described, AND, AND on thing I forgot to purchase was the master cylinder rod, that goes to the brake pedal. I will need TWO of the rods.

PM me whenever you run across this stuff,
Thanks
Jeff

Willys_MB · 08-03-2019, 04:18 PM

Quote:

Originally Posted by specialtyretail

It has these..... $60.00 shipped if you need them. Thanks, Fred.

PN sent

**chevmn** · 08-03-2019, 04:23 PM

I'll take the mirrors, or get in line if Willys_MB does not take. Not sure if still available, let me know.

**specialtyretail** · 08-03-2019, 04:55 PM

Quote:

Originally Posted by chevmn

I'll take the mirrors, or get in line if Willys_MB does not take. Not sure if still available, let me know.

Let me give Willys_MB first shot if you don't mind. I also made a thread with better pics. Thanks, Fred.

**specialtyretail** · 08-03-2019, 05:05 PM

Quote:

Originally Posted by chevmn

I'll take the mirrors, or get in line if Willys_MB does not take. Not sure if still available, let me know.

Did you see the heads were plastic? If you are still interested, I would go $48.00 shipped for the set. Thanks, Fred.

**chevmn** · 08-03-2019, 05:13 PM

Quote:

Originally Posted by specialtyretail

Did you see the heads were plastic? If you are still interested, I would go $48.00 shipped for the set. Thanks, Fred.

Thanks Fred....I will take them. Sending pp now.

**specialtyretail** · 08-03-2019, 05:15 PM

Quote:

Originally Posted by chevmn

Thanks Fred....I will take them. Sending pp now.

They are yours. Thanks, Fred.

Hidesertchevy · 08-03-2019, 05:19 PM

How much for the wing Window's?

Hidesertchevy · 08-03-2019, 05:21 PM

Steering column?

08-03-2019, 02:06 PM	#1
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Back in bizness again.... Hey guys, it has been a while since I was able to get out and track one down. Those days are over, just drug this organ donor in. 72 Chevy, well optioned. It is still on the trailer but I am going to start on it. I CANNOT ship larger parts but no part is too small. First off, upper radiator brackets, $15.00 shipped. It also has a matching set of historical documents and tag [for display purposes only] that are available for purchase for $250.00. All prices I will be posting are shipped, so let the fun begin. Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

08-03-2019, 02:10 PM	#2
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: Back in bizness again.... What mirrors does it have on it? __________________ 1968 GMC C2500 Long Bed Fleetside

08-03-2019, 02:13 PM	#3
tjmb1086 Senior Member Join Date: Feb 2014 Location: Ks Posts: 1,115	Re: Back in bizness again.... Interested in the doors possibly if there not rusted out

08-03-2019, 02:32 PM	#5
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: Back in bizness again.... What size wheels does it have? 16s Les

08-03-2019, 02:33 PM	#7
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,234	Re: Back in bizness again.... I’d be interested in the ac control mounting bracket and center dash vent __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

08-03-2019, 02:40 PM	#9
Tripmiester Senior Member Join Date: Jul 2018 Location: Bethany Connecticut Posts: 369	Re: Back in bizness again.... Fred, Looking for the wiring from the ribbon wire to the rear taillights if in tact and no splices Also looking for the stock spark plug wire holders heat shields ect.... Steering midshaft as well if in good condition Thanks Steve

08-03-2019, 04:10 PM	#17
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,319	Re: Back in bizness again.... Fred, Something I've been thinking about....I plan to install manual disc brakes on my 67 and 68 when complete. I have one, for sure master cylinder with the proportioning valve and lines (I cut the lines below the valve. It will need a new m/cyl when I go to install............ I would like to purchase another m/cyl with proportioning valve setup as I just described, AND, AND on thing I forgot to purchase was the master cylinder rod, that goes to the brake pedal. I will need TWO of the rods. PM me whenever you run across this stuff, Thanks Jeff

08-03-2019, 04:23 PM	#19
chevmn Senior Member Join Date: Dec 2017 Location: Central MO Posts: 886	Re: Back in bizness again.... I'll take the mirrors, or get in line if Willys_MB does not take. Not sure if still available, let me know.

08-03-2019, 05:19 PM	#24
Hidesertchevy Registered User Join Date: Mar 2017 Location: yucca valley Posts: 239	Re: Back in bizness again.... How much for the wing Window's?

08-03-2019, 05:21 PM	#25
Hidesertchevy Registered User Join Date: Mar 2017 Location: yucca valley Posts: 239	Re: Back in bizness again.... Steering column?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.