|
08-08-2019, 05:02 PM
|
#1 |
|
Registered User
Join Date: Dec 2018
Location: Dallas, PA
Posts: 551
|
Brake line Size
I just installed my new Master Cylinder with proportion valve, on my 64 C10.
The proportion valve is a GM PV-2 from CPP. It's basically a generic Corvette Disc /Drum used in most hot rod applications. Here is a pic. I need to run (2) new brake lines, one to each caliper, and one line to the rear drum brakes. The second pic shows 3/16 brake lines to both front and rear, does that sound right for our trucks. |
|
|
|
08-08-2019, 06:21 PM
|
#2 |
|
Registered User
Join Date: Jan 2013
Location: Calgary Alberta
Posts: 1,170
|
Re: Brake line Size
Originally you had some 1/4" when the single pot supplied everything. When I put in a dual cylinder for drums all around I used adapters but if you are changing to all new 3/16" lines everywhere your diagram is probably based on tried and true results.
|
|
|
|
|
08-08-2019, 07:18 PM
|
#3 |
|
Post Whore
  
Join Date: May 2015
Location: Alabama
Posts: 14,674
|
Re: Brake line Size
mine is 3/16" to each front and 1/4" to the rear and then splits into 3/16"...you can get different size lines with the same size nut...
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
