1965 C30 Dump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ironoar · 08-16-2019, 08:03 AM

Well, just picked up this 1965 C30 with dump on it and gonna start tearing into it. According to the guy I bought it from it has:

1975 Rearend
350 swapped into it out of something
Power Steering out of a 79 Suburban
New brake rebuild all the way around
Rebuilt passenger dump cyl.

What I’m going to start with:

Identification of trans, motor, rearend, dump pump, etc
Get the dump working
Tune up
Fluid changes
Grease everything
Wire taillights
Bleed brakes
Put the mirrors on
Cab and marker lights
Windshield
Minor body work

Update 8/15/19
Well had a chance to work on the truck last night and decided to give the dump a try. The guy I bought it off of told me that the dump when engaged would try to lift but the passenger side cylinder was bent which he had rebuilt. According to him the PTO shaft was hooked up to the wrong (upper) input shaft on the pump. I switched the pto driveline to the other shaft with no success, unhooked the cable to the valve and moved it by hand. No matter what I tried I was getting no movement and it wasn’t whining. It has a pretty major leak around the inputs so the next step is to pull the pump, identify it and possibly rebuild.

**Clyde65** · 08-17-2019, 07:19 PM

Love me a c30 man!

**68bowtie** · 08-17-2019, 10:56 PM

Duallies rock. Nice find.

Ironoar · 08-22-2019, 11:05 PM

Thanks guys, been working a lot so not much going on other than try to get the dump working.

08-16-2019, 08:03 AM	#1
Ironoar Registered User Join Date: Aug 2019 Location: Appalachian’s Posts: 9	1965 C30 Dump Well, just picked up this 1965 C30 with dump on it and gonna start tearing into it. According to the guy I bought it from it has: 1975 Rearend 350 swapped into it out of something Power Steering out of a 79 Suburban New brake rebuild all the way around Rebuilt passenger dump cyl. What I’m going to start with: Identification of trans, motor, rearend, dump pump, etc Get the dump working Tune up Fluid changes Grease everything Wire taillights Bleed brakes Put the mirrors on Cab and marker lights Windshield Minor body work Update 8/15/19 Well had a chance to work on the truck last night and decided to give the dump a try. The guy I bought it off of told me that the dump when engaged would try to lift but the passenger side cylinder was bent which he had rebuilt. According to him the PTO shaft was hooked up to the wrong (upper) input shaft on the pump. I switched the pto driveline to the other shaft with no success, unhooked the cable to the valve and moved it by hand. No matter what I tried I was getting no movement and it wasn’t whining. It has a pretty major leak around the inputs so the next step is to pull the pump, identify it and possibly rebuild. Attached Images Last edited by Ironoar; 08-16-2019 at 09:49 AM.

08-17-2019, 07:19 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 1965 C30 Dump Love me a c30 man! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-17-2019, 10:56 PM	#3
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,795	Re: 1965 C30 Dump Duallies rock. Nice find. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

08-22-2019, 11:05 PM	#4
Ironoar Registered User Join Date: Aug 2019 Location: Appalachian’s Posts: 9	Re: 1965 C30 Dump Thanks guys, been working a lot so not much going on other than try to get the dump working.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.