WA Wanted: Smog Pump setup, small block, parts or complete, pictures also needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 08-30-2019, 09:00 PM

Post a link to pics if you have it. Ive searched and cant find much.

PM me with details of what you have and price.

Thanks in advance.

**DeadheadNM** · 08-30-2019, 09:02 PM

If you need some photos see my Blazer build thread of the CA emissions system I restored to the motor.

*randy500* · 08-30-2019, 09:07 PM

Quote:

Originally Posted by DeadheadNM

If you need some photos see my Blazer build thread of the CA emissions system I restored to the motor.

Thanks any idea of what page?
I cant find anything searching lately, not sure what the problem is.

Thank you.

**DeadheadNM** · 08-30-2019, 09:19 PM

You bet. Scattered about but starting on post #200. The aftermarket corvette suppliers are a good resource for a lot of the pieces. The diverter valves are pricey and hard to find...like tow hook pricey.

newbraunie · 08-31-2019, 10:42 AM

Was getting ready to put this up for sale. $30 plus shipping.

newbraunie · 08-31-2019, 10:46 AM

Here is a pic although not very good of AIR set up on SB 307ci.

newbraunie · 08-31-2019, 10:55 AM

More pics. Same set up from 69 C10 307ci. Do not have this for sale, just sharing pics.

*randy500* · 08-31-2019, 01:09 PM

Quote:

Originally Posted by newbraunie

More pics. Same set up from 69 C10 307ci. Do not have this for sale, just sharing pics.

Thanks for the pictures, that was very helpful.

*randy500* · 08-31-2019, 01:10 PM

Quote:

Originally Posted by newbraunie

Was getting ready to put this up for sale. $30 plus shipping.

I am considering this muffler. Seems like most are more of a silver color.

*randy500* · 08-31-2019, 01:11 PM

Quote:

Originally Posted by DeadheadNM

You bet. Scattered about but starting on post #200. The aftermarket corvette suppliers are a good resource for a lot of the pieces. The diverter valves are pricey and hard to find...like tow hook pricey.

Thanks for the info found in your build thread.

**uncle** · 09-03-2019, 10:31 AM

I may have a few pieces. Try to get pics in next day or 2.

*randy500* · 09-03-2019, 10:46 AM

Quote:

Originally Posted by uncle

I may have a few pieces. Try to get pics in next day or 2.

Thanks

Harris57 · 09-03-2019, 12:27 PM

Quote:

Originally Posted by randy500

Post a link to pics if you have it. Ive searched and cant find much.

PM me with details of what you have and price.

Thanks in advance.

I have this setup off a 1967 if it will work?

*randy500* · 09-03-2019, 12:47 PM

Quote:

Originally Posted by Harris57

I have this setup off a 1967 if it will work?

Thanks for the pictures, I forgot about that style, i need the newer style with the diverter valve mounted to the AIR pump.

**uncle** · 09-05-2019, 04:38 PM

Pm me your # please. It will be easier for me to text him to use in trying to low one at a time.

*randy500* · 09-05-2019, 04:56 PM

Quote:

Originally Posted by uncle

Pm me your # please. It will be easier for me to text him to use in trying to low one at a time.

PM sent, thanks.

**Hidesertchevy** · 09-05-2019, 07:45 PM

Hey Randy, I think I have the pump with brackets and diverter valve off a 1972 c10 sbc350 just not sure how to post pics pm me and I can text you pics

*randy500* · 09-05-2019, 10:08 PM

Quote:

Originally Posted by Hidesertchevy

Hey Randy, I think I have the pump with brackets and diverter valve off a 1972 c10 sbc350 just not sure how to post pics pm me and I can text you pics

I sent you s pm with my phone number.

*randy500* · 09-06-2019, 10:27 PM

I have secured a pump from member uncle, thanks everybody that offered their parts. I do need a set of manifold tubes, anybody have a set?

**chewychevy67** · 09-06-2019, 10:59 PM

I have a new set of tubes for the outside of the manifolds in great condition. I'll get pictures tomorrow if that's what you need. I do not have any of the inside tubes that go inside the manifolds.

*randy500* · 09-06-2019, 11:06 PM

Quote:

Originally Posted by chewychevy67

I have a new set of tubes for the outside of the manifolds in great condition. I'll get pictures tomorrow if that's what you need. I do not have any of the inside tubes that go inside the manifolds.

That is what i need, the outside tubes. Thanks.

**DeadheadNM** · 09-06-2019, 11:15 PM

The manifold “antlers” are available reproduction I believe. There are also tubes that slide inside the holes in the manifolds that the antlers seat against. These tubes are also available as reproduction.

**davischevy** · 09-06-2019, 11:28 PM

I have started disassembly, so I can get better pictures now if you want.

*randy500* · 09-06-2019, 11:55 PM

Quote:

Originally Posted by DeadheadNM

The manifold “antlers” are available reproduction I believe. There are also tubes that slide inside the holes in the manifolds that the antlers seat against. These tubes are also available as reproduction.

Lots of corvette places are showing out of stock, did find one in stock though. I have a bunch of the inner tubes from taking them off before.

*randy500* · 09-06-2019, 11:58 PM

Quote:

Originally Posted by davischevy

I have started disassembly, so I can get better pictures now if you want.

Thanks for the pics, would like one of the water pump where the adjuster brace bolts, and is the stud 5/16 or 3/8.

08-30-2019, 09:00 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Post a link to pics if you have it. Ive searched and cant find much. PM me with details of what you have and price. Thanks in advance.

08-30-2019, 09:19 PM	#4
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed You bet. Scattered about but starting on post #200. The aftermarket corvette suppliers are a good resource for a lot of the pieces. The diverter valves are pricey and hard to find...like tow hook pricey. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-31-2019, 10:42 AM	#5
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Was getting ready to put this up for sale. $30 plus shipping. Attached Images __________________ 1971 C20 LWB Cheyenne 396/TH400 2017 Chevy SS - Holden conversion 2015 Chevy SS 2013 Acura MDX Last edited by newbraunie; 08-31-2019 at 11:02 AM.

08-31-2019, 10:46 AM	#6
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Here is a pic although not very good of AIR set up on SB 307ci. Attached Images __________________ 1971 C20 LWB Cheyenne 396/TH400 2017 Chevy SS - Holden conversion 2015 Chevy SS 2013 Acura MDX

08-31-2019, 10:55 AM	#7
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed More pics. Same set up from 69 C10 307ci. Do not have this for sale, just sharing pics. Attached Images __________________ 1971 C20 LWB Cheyenne 396/TH400 2017 Chevy SS - Holden conversion 2015 Chevy SS 2013 Acura MDX

08-30-2019, 09:02 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed If you need some photos see my Blazer build thread of the CA emissions system I restored to the motor. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-03-2019, 10:31 AM	#11
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed I may have a few pieces. Try to get pics in next day or 2.

09-05-2019, 04:38 PM	#15
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Pm me your # please. It will be easier for me to text him to use in trying to low one at a time.

09-05-2019, 07:45 PM	#17
Hidesertchevy Senior Member Join Date: Mar 2017 Location: yucca valley Posts: 271	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Hey Randy, I think I have the pump with brackets and diverter valve off a 1972 c10 sbc350 just not sure how to post pics pm me and I can text you pics

09-06-2019, 10:27 PM	#19
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed I have secured a pump from member uncle, thanks everybody that offered their parts. I do need a set of manifold tubes, anybody have a set?

09-06-2019, 10:59 PM	#20
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed I have a new set of tubes for the outside of the manifolds in great condition. I'll get pictures tomorrow if that's what you need. I do not have any of the inside tubes that go inside the manifolds.

09-06-2019, 11:15 PM	#22
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed The manifold “antlers” are available reproduction I believe. There are also tubes that slide inside the holes in the manifolds that the antlers seat against. These tubes are also available as reproduction. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-06-2019, 11:28 PM	#23
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed I have started disassembly, so I can get better pictures now if you want. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.