C-10 National's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 09-25-2019, 09:33 AM

Anybody here going? We have a group of our local chapter club going up. Been the last several years it's a good show and they have a pretty good swap meet also.
I'll be taking the 71 C 10 again this year. Hopefully next year my daughter's truck will join in also.

Mudflat · 09-25-2019, 09:52 AM

When is the upstate meet, the one held at lake Cooley last year?

Andy4639 · 09-25-2019, 10:23 AM

Quote:

Originally Posted by Mudflat

When is the upstate meet, the one held at lake Cooley last year?

This October.

**special-K** · 09-25-2019, 06:27 PM

I'd go but all I have are a '72 K2500 and a '67 C1500

. No, that's a great place. I wish I could make it. I have a list a mile long this year of shows I didn't go to. It's the year of skipped events. Very minimal

Andy4639 · 09-25-2019, 08:28 PM

Quote:

Originally Posted by special-K

I'd go but all I have are a '72 K2500 and a '67 C1500

. No, that's a great place. I wish I could make it. I have a list a mile long this year of shows I didn't go to. It's the year of skipped events. Very minimal

Tim this is the 2nd show I have been to all year. Well 3rd if I count the Hot Rod Power tour also.

**Seanext** · 09-25-2019, 08:28 PM

I am thinking of going, I have to go to Asheville Sat anyway might as well make a day of it. I have never been how it the swap meet?

Andy4639 · 09-25-2019, 09:42 PM

Quote:

Originally Posted by Seanext

I am thinking of going, I have to go to Asheville Sat anyway might as well make a day of it. I have never been how it the swap meet?

It's OK there is always a bunch of truck stuff and signs and such. It's not like Charlotte though!

I just wondering where all the guy's from last year are? Everybody was saying they needed to change dates so they did. Now nobody has even replied back that they are going.

72c20customcamper · 09-26-2019, 04:16 PM

First I'm hearing of it. Unfortunately I have plans to be at Lebanon race track . Don't know if the Chevelle will be ready for the nostalgia drags that start Friday night and run all weekend. If not I'll just do the show.

But your show in October I might be able to attend.

Andy4639 · 09-26-2019, 08:07 PM

Quote:

Originally Posted by 72c20customcamper

First I'm hearing of it. Unfortunately I have plans to be at Lebanon race track . Don't know if the Chevelle will be ready for the nostalgia drags that start Friday night and run all weekend. If not I'll just do the show.

But your show in October I might be able to attend.

Come on down. The show picnic is a great show. We give away some nice door prizes to.

Andy4639 · 09-28-2019, 09:11 PM

Another year and another top 50. Good seeing Deland,Matt Paul and Jeff today. Had a great day.
Five of our local club members took hardware home.
My daughter & grandson.

Andy4639 · 09-28-2019, 09:29 PM

More!

Andy4639 · 09-28-2019, 09:36 PM

And even more!

Andy4639 · 09-28-2019, 09:52 PM

A couple more my daughter took!
De Land and my daughter she took the rainbow pictures on the way up after the rain storm we drove through on Interstate 40.

72LB · 09-29-2019, 07:57 AM

It was a nice show, a good turn out. The swap meet part wasn't all that, there were some asking a bit much for stuff that wasn't worth it.

Andy4639 · 09-29-2019, 10:21 AM

Quote:

Originally Posted by 72LB

It was a nice show, a good turn out. The swap meet part wasn't all that, there were some asking a bit much for stuff that wasn't worth it.

Yes most of them are small vendors and only hit local shows so they want top dollar for everything. I was looking at wheels for my daughters truck. %on 5 truck ralley's. I vendor had brand new ones ready to go for $80.00 each. Powder coated and ready for painting your color.

The old wheels that all the vendors had wanting $200.00 for them. Those where the cheapest ones I found. After that spending another $125.00 to have blasted I'm going with the new ones. I'll be at the same price with no time in them.

Andy4639 · 09-29-2019, 02:01 PM

Notice anything about these inner fenders?
I had to do a double look see when I first looked at it. I thought my eyes where messing with me.
This was a full on custom Blazer for sure and he was only asking $45,000 for it!!!!

52napco · 09-29-2019, 03:15 PM

Love your front licsense plate ....think it adds about 500 horsepower

Andy4639 · 09-29-2019, 04:26 PM

Quote:

Originally Posted by 52napco

Love your front licsense plate ....think it adds about 500 horsepower

I don't know about the horse power but it does make it great!

PanelDeland · 09-29-2019, 05:45 PM

Hey Andy, I wanted to give a big thanks to you and your daughter for the shade and companionship during the show. It was great to catch up and nice to see someone I hadn't in a while.

**DPowers** · 09-29-2019, 09:51 PM

Some nice trucks there this year. We did real decent with 60-66 parts that we brought.

Andy4639 · 09-30-2019, 09:25 AM

Quote:

Originally Posted by PanelDeland

Hey Andy, I wanted to give a big thanks to you and your daughter for the shade and companionship during the show. It was great to catch up and nice to see someone I hadn't in a while.

Yes sir! It was great seeing you to sir. Always welcome under our tent.

Andy4639 · 09-30-2019, 09:28 AM

Quote:

Originally Posted by DPowers

Some nice trucks there this year. We did real decent with 60-66 parts that we brought.

Sorry I didn't know you at the show. I'd said hello.

**DPowers** · 09-30-2019, 07:16 PM

Quote:

Originally Posted by Andy4639

Sorry I didn't know you at the show. I'd said hello.

No problem- next time.

**DPowers** · 09-30-2019, 08:15 PM

A couple of Youtube videos
https://www.youtube.com/watch?v=aXU03PkhsOo
https://www.youtube.com/watch?v=5_wR...srLYXqgEEdSqE8

**Ironangel** · 10-01-2019, 04:51 AM

No burnout contest? I don't think the Mid-West All Truck Nationals had a burnout contest this year...I couldn't go this year or last year...Andy's license plate's fault...

Building a new BBC 439 for "Nasty Sally" and "Belle" has #8 oil fouling issues. Both trucks will be getting new motors. I picked up a GM Performance 260HP 350 five years ago for $1200 delivered. After assembling this big block, those small block parts like the springs and pushrods sure look small. I blew up the 1969 L34 SS/396 but salvaged the crank, closed chamber heads (290's) and the Weiand high rise & a Cliff Ruggles Quadrajet. Heres a video of Sally winning the first place burnout trophy two years ago... https://www.youtube.com/watch?v=_jXx...FwXZgV5iVEXyeB She'll be back this spring...A .060" over first gen 454 with the 3.760 stroke 396 cam with new JE Forged domes. A Clay White BBC solid lifter cam. 13.5:1 110 octane motor, should live a long time if I keep the rpm at 7K or lower...I take good tires off and throw on some saved BFG 60's. Next year I'll have a pair of these to dazzle the crowd. https://highway-max-coloured-smoke-u...date-june-2017

09-25-2019, 09:33 AM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	C-10 National's Anybody here going? We have a group of our local chapter club going up. Been the last several years it's a good show and they have a pretty good swap meet also. I'll be taking the 71 C 10 again this year. Hopefully next year my daughter's truck will join in also. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-25-2019, 09:52 AM	#2
Mudflat Registered User Join Date: Mar 2018 Location: Spartanburg SC Posts: 48	Re: C-10 National's When is the upstate meet, the one held at lake Cooley last year?

09-25-2019, 06:27 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: C-10 National's I'd go but all I have are a '72 K2500 and a '67 C1500 . No, that's a great place. I wish I could make it. I have a list a mile long this year of shows I didn't go to. It's the year of skipped events. Very minimal __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-25-2019, 08:28 PM	#6
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 583	Re: C-10 National's I am thinking of going, I have to go to Asheville Sat anyway might as well make a day of it. I have never been how it the swap meet?

09-28-2019, 09:11 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: C-10 National's Another year and another top 50. Good seeing Deland,Matt Paul and Jeff today. Had a great day. Five of our local club members took hardware home. My daughter & grandson. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-26-2019, 04:16 PM	#8
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,716	Re: C-10 National's First I'm hearing of it. Unfortunately I have plans to be at Lebanon race track . Don't know if the Chevelle will be ready for the nostalgia drags that start Friday night and run all weekend. If not I'll just do the show. But your show in October I might be able to attend. Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

09-28-2019, 09:29 PM	#11
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: C-10 National's More! Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-28-2019, 09:36 PM	#12
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: C-10 National's And even more! Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-28-2019, 09:52 PM	#13
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: C-10 National's A couple more my daughter took! De Land and my daughter she took the rainbow pictures on the way up after the rain storm we drove through on Interstate 40. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-29-2019, 07:57 AM	#14
72LB Registered User Join Date: May 2017 Location: Inman/Boiling Springs, SC Posts: 420	Re: C-10 National's It was a nice show, a good turn out. The swap meet part wasn't all that, there were some asking a bit much for stuff that wasn't worth it. __________________ 1985 C10 shortbed, current project. Member of the Upstate SC GM Truck Club.

09-29-2019, 02:01 PM	#16
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: C-10 National's Notice anything about these inner fenders? I had to do a double look see when I first looked at it. I thought my eyes where messing with me. This was a full on custom Blazer for sure and he was only asking $45,000 for it!!!! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-29-2019, 03:15 PM	#17
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: C-10 National's Love your front licsense plate ....think it adds about 500 horsepower

09-29-2019, 05:45 PM	#19
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: C-10 National's Hey Andy, I wanted to give a big thanks to you and your daughter for the shade and companionship during the show. It was great to catch up and nice to see someone I hadn't in a while. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

09-29-2019, 09:51 PM	#20
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: C-10 National's Some nice trucks there this year. We did real decent with 60-66 parts that we brought. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

09-30-2019, 08:15 PM	#24
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: C-10 National's A couple of Youtube videos https://www.youtube.com/watch?v=aXU03PkhsOo https://www.youtube.com/watch?v=5_wR...srLYXqgEEdSqE8 __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556



Register or Log In To remove these advertisements.

10-01-2019, 04:51 AM	#25
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: C-10 National's No burnout contest? I don't think the Mid-West All Truck Nationals had a burnout contest this year...I couldn't go this year or last year...Andy's license plate's fault... Building a new BBC 439 for "Nasty Sally" and "Belle" has #8 oil fouling issues. Both trucks will be getting new motors. I picked up a GM Performance 260HP 350 five years ago for $1200 delivered. After assembling this big block, those small block parts like the springs and pushrods sure look small. I blew up the 1969 L34 SS/396 but salvaged the crank, closed chamber heads (290's) and the Weiand high rise & a Cliff Ruggles Quadrajet. Heres a video of Sally winning the first place burnout trophy two years ago... https://www.youtube.com/watch?v=_jXx...FwXZgV5iVEXyeB She'll be back this spring...A .060" over first gen 454 with the 3.760 stroke 396 cam with new JE Forged domes. A Clay White BBC solid lifter cam. 13.5:1 110 octane motor, should live a long time if I keep the rpm at 7K or lower...I take good tires off and throw on some saved BFG 60's. Next year I'll have a pair of these to dazzle the crowd. https://highway-max-coloured-smoke-u...date-june-2017 __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

Register or Log In To remove these advertisements.