MO I did NOT do this, but here it is... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 10-02-2019, 10:13 PM

PRICE REDUCED.... The 72 C10 we did a while back had a box of,,, stuff,,. This was included in said box. It is the door jamb switches and wiring harness for courtesy lights. I DID NOT cut the harnesses, they were already removed. Anyways, if anyone can use this set up, $10.00 shipped. Thanks, Fred.

**specialtyretail** · 10-04-2019, 05:53 PM

ttt....

**specialtyretail** · 10-10-2019, 11:06 AM

Price reduced....

**cwcarpenter98** · 10-10-2019, 01:16 PM

Hey Fred, I'm wondering if I could make this work on my 63. Where does it plug into to make the lights come on? Also, would there be something else that I need to make it all work?

**specialtyretail** · 10-10-2019, 01:19 PM

Quote:

Originally Posted by cwcarpenter98

Hey Fred, I'm wondering if I could make this work on my 63. Where does it plug into to make the lights come on? Also, would there be something else that I need to make it all work?

It plugs either into the main under dash harness or there may be a pigtail coming off the fuse block on our trucks. I do not know if it would work with your system for sure, but could probably be adapted somehow. Thanks, Fred.

**cwcarpenter98** · 10-10-2019, 01:21 PM

Thanks Fred, looks like I need to do some more research for committing. I'll have to pass for now

**cwcarpenter98** · 10-10-2019, 01:38 PM

Hey Fred, I think I might be able to make something work. Could you post an up close picture of the plugs on the harness please? I think that might be the deciding factor

**specialtyretail** · 10-10-2019, 02:01 PM

Quote:

Originally Posted by cwcarpenter98

Hey Fred, I think I might be able to make something work. Could you post an up close picture of the plugs on the harness please? I think that might be the deciding factor

i can this evening. Thanks, Fred.

**cwcarpenter98** · 10-10-2019, 02:03 PM

Much appreciated, thanks!

**specialtyretail** · 10-10-2019, 06:46 PM

Quote:

Originally Posted by cwcarpenter98

Much appreciated, thanks!

Pics....

**cwcarpenter98** · 10-10-2019, 06:52 PM

That looks like it will work! Once I get back on my laptop, I'll send through paypal

**specialtyretail** · 10-10-2019, 07:07 PM

Quote:

Originally Posted by cwcarpenter98

That looks like it will work! Once I get back on my laptop, I'll send through paypal

Cool, it is yours. Thanks, Fred.

**cwcarpenter98** · 10-10-2019, 07:50 PM

Just got back on my laptop, had to finish up some stuff for my on campus job that I started today. Money is sent. Thank you! I'm excited to make this work and not have to get in a dark at night anymore

**cwcarpenter98** · 10-16-2019, 01:06 PM

Harness arrived yesterday, thanks!

**specialtyretail** · 10-16-2019, 01:32 PM

Quote:

Originally Posted by cwcarpenter98

Harness arrived yesterday, thanks!

Cool, thanks for the heads up.

10-02-2019, 10:13 PM	#1
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	I did NOT do this, but here it is... PRICE REDUCED.... The 72 C10 we did a while back had a box of,,, stuff,,. This was included in said box. It is the door jamb switches and wiring harness for courtesy lights. I DID NOT cut the harnesses, they were already removed. Anyways, if anyone can use this set up, $10.00 shipped. Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks. Last edited by specialtyretail; 10-10-2019 at 11:05 AM.

10-04-2019, 05:53 PM	#2
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: I did NOT do this, but here it is... ttt.... __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

10-10-2019, 11:06 AM	#3
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: I did NOT do this, but here it is... Price reduced.... __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

10-10-2019, 01:16 PM	#4
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,506	Re: I did NOT do this, but here it is... Hey Fred, I'm wondering if I could make this work on my 63. Where does it plug into to make the lights come on? Also, would there be something else that I need to make it all work? __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-10-2019, 01:21 PM	#6
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,506	Re: I did NOT do this, but here it is... Thanks Fred, looks like I need to do some more research for committing. I'll have to pass for now __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-10-2019, 01:38 PM	#7
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,506	Re: I did NOT do this, but here it is... Hey Fred, I think I might be able to make something work. Could you post an up close picture of the plugs on the harness please? I think that might be the deciding factor __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-10-2019, 02:03 PM	#9
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,506	Re: I did NOT do this, but here it is... Much appreciated, thanks! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-10-2019, 06:52 PM	#11
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,506	Re: I did NOT do this, but here it is... That looks like it will work! Once I get back on my laptop, I'll send through paypal __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-10-2019, 07:50 PM	#13
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,506	Re: I did NOT do this, but here it is... Just got back on my laptop, had to finish up some stuff for my on campus job that I started today. Money is sent. Thank you! I'm excited to make this work and not have to get in a dark at night anymore __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-16-2019, 01:06 PM	#14
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,506	Re: I did NOT do this, but here it is... Harness arrived yesterday, thanks! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.