327 distributer drive issue? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

adricar1 · 10-07-2019, 04:02 AM

I have a something strange going on with the engine. I have just built a 327 circa 1967, for a truck, I have fitted a 350 oil pump, and drive.350 chevy distributer The intake manifold is an Edelbrock eps, for a 350 chevy. The oil pump drive shaft just touches the end of the distributer, and has not got enough length the locate into the hole to drive the oil pump? distributer is tight down on the manifold.
Is this something strange to the 327 as I have never encountered this before,
I have read there is a chevy 2 oil pump, but the shaft is shorter? so it should be the same set up as I have,The distributer length is the same as the 283 and another 350 chevy I have,
can anyone help

**PGSigns** · 10-07-2019, 06:39 AM

Hard to tell with out the parts out and checking the pump and the shaft to see what one is the problem. Did you put the oil pump shaft on the pump with the plastic retainer and install them as a assembly?
Jimmy

**The Rocknrod** · 10-07-2019, 01:09 PM

Yes they discuss it here, post #16 may be your answer since your in that area of the world - https://www.jalopyjournal.com/forum/...o-short.30581/

61K10 · 10-07-2019, 02:11 PM

Only 2 that i know 1 is 5.77" Meling IS55G long the other is 5.30" long IS55G (chevy 2 V8) maybe they gave you the short one?

adricar1 · 10-07-2019, 04:08 PM

from what i have found out there are several more lengths the is55e is 5.96 inch which will be nearer what i need, i have the 1s55g which is 5.77 inch.
who would of thought there would be so many there is also a 6.25 inch shaft as well by morosso.

many thanks for the links guys

61K10 · 10-08-2019, 03:04 PM

the all steel ones are longer because of the coupler that goes over the pump shaft. no nylon coupler.

10-07-2019, 06:39 AM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: 327 distributer drive issue? Hard to tell with out the parts out and checking the pump and the shaft to see what one is the problem. Did you put the oil pump shaft on the pump with the plastic retainer and install them as a assembly? Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-07-2019, 01:09 PM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 327 distributer drive issue? Yes they discuss it here, post #16 may be your answer since your in that area of the world - https://www.jalopyjournal.com/forum/...o-short.30581/ __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-07-2019, 02:11 PM	#4
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: 327 distributer drive issue? Only 2 that i know 1 is 5.77" Meling IS55G long the other is 5.30" long IS55G (chevy 2 V8) maybe they gave you the short one? __________________ 1961 chevy K10 my build is------------61K10 build

10-07-2019, 04:08 PM	#5
adricar1 Registered User Join Date: Sep 2013 Location: United kingdom Posts: 127	Re: 327 distributer drive issue? from what i have found out there are several more lengths the is55e is 5.96 inch which will be nearer what i need, i have the 1s55g which is 5.77 inch. who would of thought there would be so many there is also a 6.25 inch shaft as well by morosso. many thanks for the links guys __________________ GMC K1500 1971 350 cu in th350 4wd Bondo Bob c 10 1971 stepside th 350 c10 1970 350 cu in manual air con stepside.

10-08-2019, 03:04 PM	#6
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: 327 distributer drive issue? the all steel ones are longer because of the coupler that goes over the pump shaft. no nylon coupler. __________________ 1961 chevy K10 my build is------------61K10 build

10-07-2019, 04:02 AM	#1
adricar1 Registered User Join Date: Sep 2013 Location: United kingdom Posts: 127	327 distributer drive issue? I have a something strange going on with the engine. I have just built a 327 circa 1967, for a truck, I have fitted a 350 oil pump, and drive.350 chevy distributer The intake manifold is an Edelbrock eps, for a 350 chevy. The oil pump drive shaft just touches the end of the distributer, and has not got enough length the locate into the hole to drive the oil pump? distributer is tight down on the manifold. Is this something strange to the 327 as I have never encountered this before, I have read there is a chevy 2 oil pump, but the shaft is shorter? so it should be the same set up as I have,The distributer length is the same as the 283 and another 350 chevy I have, can anyone help __________________ GMC K1500 1971 350 cu in th350 4wd Bondo Bob c 10 1971 stepside th 350 c10 1970 350 cu in manual air con stepside.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.