67 panel truck neutral safety - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67 stable · 11-09-2019, 11:31 PM

my panel truck will start in any gear, is this an adjustment to fix or replacing the switch.

thanks

**HO455** · 11-10-2019, 12:11 AM

Which transmission and engine do you have?

67 stable · 11-10-2019, 01:02 AM

350 sb and a turbo 400 trans

04ls1gto · 11-10-2019, 08:39 AM

Should just be an adjustment

**LockDoc** · 11-10-2019, 11:10 AM

-
There are two small hex head screws that hold the NSS switch to the lower column. I have seen both 1/4 and 5/16" heads on them. All you need to do is loosen them up a little and you should be able to slide the switch to the right or left. I set mine by blocking the wheels, putting the shifter in reverse and adjusting the switch until the reverse lights come on. This usually gets it aligned properly. Of course you have to be sure that the reverse lights work....

LockDoc

**HO455** · 11-10-2019, 02:01 PM

This picture shows the switch and the two purple wires hooked to it. (Looking up from next to gas pedal)
Since your truck starts in all gears someone may have jumpered the switch in the past because the switch failed. The switch does not care which purple wire goes to which terminal on the starter safety switch side. The other side of the switch has the back up lights on it. (Second photo. On the door side of the column) So there are four terminals with wires hooked to the switch on the column.

Good luck

11-09-2019, 11:31 PM	#1
67 stable Registered User Join Date: Sep 2018 Location: idaho Posts: 11	67 panel truck neutral safety my panel truck will start in any gear, is this an adjustment to fix or replacing the switch. thanks

11-10-2019, 12:11 AM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,350	Re: 67 panel truck neutral safety Which transmission and engine do you have? __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

11-10-2019, 01:02 AM	#3
67 stable Registered User Join Date: Sep 2018 Location: idaho Posts: 11	Re: 67 panel truck neutral safety 350 sb and a turbo 400 trans

11-10-2019, 08:39 AM	#4
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: 67 panel truck neutral safety Should just be an adjustment

11-10-2019, 11:10 AM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,770	Re: 67 panel truck neutral safety - There are two small hex head screws that hold the NSS switch to the lower column. I have seen both 1/4 and 5/16" heads on them. All you need to do is loosen them up a little and you should be able to slide the switch to the right or left. I set mine by blocking the wheels, putting the shifter in reverse and adjusting the switch until the reverse lights come on. This usually gets it aligned properly. Of course you have to be sure that the reverse lights work.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-10-2019, 02:01 PM	#6
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,350	Re: 67 panel truck neutral safety This picture shows the switch and the two purple wires hooked to it. (Looking up from next to gas pedal) Since your truck starts in all gears someone may have jumpered the switch in the past because the switch failed. The switch does not care which purple wire goes to which terminal on the starter safety switch side. The other side of the switch has the back up lights on it. (Second photo. On the door side of the column) So there are four terminals with wires hooked to the switch on the column. Good luck Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.