am I at risk?? [pic] - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*mike reeh* · 12-05-2003, 12:27 AM

have a look see.. let me know whats happening

thx

mike

phantom dually · 12-05-2003, 12:39 AM

Nice bushings in those arms!!!

*racedvl* · 12-05-2003, 12:44 AM

low 84 · 12-05-2003, 01:13 AM

like he said your lca bushing are gone.

is that a grease fitting on the end of you cross shaft? i haven't seen that before...........

78' Silverado · 12-05-2003, 03:00 AM

WOW.....

*1FaastC10* · 12-05-2003, 04:09 AM

Quote:

Originally posted by low 84
like he said your lca bushing are gone.

is that a grease fitting on the end of you cross shaft? i haven't seen that before...........

3/4 ton +, that's why you've never seen them. you're used to looking at 1/2 ton stuff.

low 84 · 12-05-2003, 04:34 AM

intresting. never knew that

Prerunner1982 · 12-05-2003, 08:08 AM

and i thought mine were bad

KShortell · 12-05-2003, 11:48 AM

Yikes!

crackajacka · 12-05-2003, 12:38 PM

so uh how'd that go again?

LOHRTBT · 12-05-2003, 12:45 PM

eek!

Kenneth · 12-05-2003, 12:54 PM

Some say something more than eek!!!
For us less knowledgeable people what should that look like? I'm assuming the fitting around the bolt is just loose and will eventually break the bolt and your truck will fall to the ground?
What is the risk?

crackajacka · 12-05-2003, 01:06 PM

theres supposed to be a rubber or polyurathane bushing there.

Fletch · 12-05-2003, 04:10 PM

Looks like that Zirk ain't seen the end of a grease gun in good long while.

**swervin ervin** · 12-05-2003, 07:39 PM

Rubber?? I want to know where the metal insert went???

Man, you are riding on borrowed time my friend.

86SILVERADO · 12-05-2003, 09:48 PM

Something tells me you don't do too much driving in adverse weather conditions.

87 STEPPER · 12-06-2003, 02:38 AM

Quote:

Originally posted by 1FaastC10

3/4 ton +, that's why you've never seen them. you're used to looking at 1/2 ton stuff.

That's not a true statement the 1/2 truck's from the 60' & early 70's have that style of cont. arm cross shaft also.

Not too shure when it was changed i think around '77 or so.

Mike,

I have a bad r/h upper aft bushing on my S10 and i'll be changing everything out soon i ordered a complete polygraphite front kit form PST for 219 bux lookie here www.p-s-t.com They do mostly muscle cars but click online catalog and go to the truck section.

I just received the parts yesterday and all the components in the kit look like top notch high quality stuff.

12-05-2003, 12:27 AM	#1
mike reeh 5 day ban, learn to behave. Join Date: Nov 2002 Location: san diego, ca Posts: 684	am I at risk?? [pic] have a look see.. let me know whats happening thx mike

12-05-2003, 12:39 AM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Nice bushings in those arms!!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-05-2003, 01:13 AM	#4
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	like he said your lca bushing are gone. is that a grease fitting on the end of you cross shaft? i haven't seen that before........... __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

12-05-2003, 03:00 AM	#5
78' Silverado \/ My Loves \/ Join Date: Mar 2003 Location: Midland,Texas Posts: 462	WOW..... __________________ 78' Silverado - Blue - (In a Coma) 04' Silverado -Red- 383 Stroker in progress for the 78'!!!

12-05-2003, 04:34 AM	#7
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	intresting. never knew that __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

12-05-2003, 12:44 AM	#3
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020

12-05-2003, 08:08 AM	#8
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,906	and i thought mine were bad __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

12-05-2003, 11:48 AM	#9
KShortell Registered User Join Date: Oct 2003 Location: Chesapeake, VA Posts: 734	Yikes! __________________ Semper Paratus

12-05-2003, 12:38 PM	#10
crackajacka Stylin Join Date: Sep 2001 Location: Tuttle, OK Posts: 620	so uh how'd that go again? __________________ Ive been traveling for some time, with my fishin pole and my bottle of shyne. Most Girls like finished products and just dont understand what a good addiction does for you http://www.paulwall.us/

12-05-2003, 12:45 PM	#11
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	eek! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

12-05-2003, 12:54 PM	#12
Kenneth Registered User Join Date: Jul 2003 Location: Austin, Texas Posts: 53	Some say something more than eek!!! For us less knowledgeable people what should that look like? I'm assuming the fitting around the bolt is just loose and will eventually break the bolt and your truck will fall to the ground? What is the risk?

12-05-2003, 01:06 PM	#13
crackajacka Stylin Join Date: Sep 2001 Location: Tuttle, OK Posts: 620	theres supposed to be a rubber or polyurathane bushing there. __________________ Ive been traveling for some time, with my fishin pole and my bottle of shyne. Most Girls like finished products and just dont understand what a good addiction does for you http://www.paulwall.us/

12-05-2003, 04:10 PM	#14
Fletch Registered User Join Date: Nov 2003 Location: Crabwell Corners Posts: 9	Looks like that Zirk ain't seen the end of a grease gun in good long while.

12-05-2003, 07:39 PM	#15
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Rubber?? I want to know where the metal insert went??? Man, you are riding on borrowed time my friend. __________________ Mike 1985 Chevy C-10

12-05-2003, 09:48 PM	#16
86SILVERADO Registered User Join Date: Dec 2002 Location: Hills of Western Mass Posts: 626	Something tells me you don't do too much driving in adverse weather conditions. __________________ 86 Silverado C10 back to 305 power! 67 C30 Dually Dump, with 350 transplant, Rockhauler 05 Duramax 3500 "If at first you don't succeed, try a bigger hammer" Member of the 1-Ton club!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.