Fabricated spare tire mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DennisP · 12-10-2019, 02:56 PM

So I recently did a makeover on my 68 C20. New bed wood came out nice but I didn't like the crappy old spare laying on my new bed. After extensive searching on this forum, I decided to fab my own version of a spare tire mount using some metal I had laying around.
I set it up to keep the tire just off the bed and side rails.

The nice thing about this is I can remove the round part if I need to haul anything large. I am going to paint the pipe. The Back brace is 316 SS. I may just leave it alone.

notsolo · 12-10-2019, 04:00 PM

Leave it alone....looks great as is. I did something simular in the 4 corners for tie down straps..in addition to tire mount....Not nearly as nice as yours.....Bed wood looks great too.BTW.

DennisP · 12-10-2019, 04:17 PM

Quote:

Originally Posted by notsolo

Leave it alone....looks great as is. I did something simular in the 4 corners for tie down straps..in addition to tire mount....Not nearly as nice as yours.....Bed wood looks great too.BTW.

Thanks buddy. That eyebolt in the corner was where I looped my spare tire security cable. I'm now going to get a locking lug nut.( Not that anyone would want that pos. tire.)

DennisP · 12-10-2019, 04:32 PM

I just realized If you look in the background behind the tire, that's me standing there.

Astro-Balls · 12-10-2019, 04:59 PM

Did you use the factory holes for mounting this?
Looks great.

**LockDoc** · 12-10-2019, 05:09 PM

Quote:

Originally Posted by DennisP

I just realized If you look in the background behind the tire, that's me standing there.

LockDoc

yuccales · 12-10-2019, 10:46 PM

Quote:

Originally Posted by DennisP

I just realized If you look in the background behind the tire, that's me standing there.

Nothing Mickey Mouse about your tire mount! Looks great!

**Getter-Done** · 12-11-2019, 12:20 AM

Great Job.
Nice Santa Hat you got on. LOL

.

DennisP · 12-11-2019, 01:31 PM

Quote:

Originally Posted by Astro-Balls

Did you use the factory holes for mounting this?
Only other question is, How much, I want one.. Looks great.

Yes, the bottom bracket uses the factory mounting holes.
Sorry, My wife is already mad at me for spending way too much time in the shop. So I wont be making any for sale anytime soon.

cornerstone · 12-11-2019, 01:45 PM

Man that is a nice piece! I say leave it SS. I may have to "borrow" that idea.

How do you remove the center hub piece? Did you use nutzerts in the brace or thread the holes?

DennisP · 12-11-2019, 02:08 PM

Quote:

Originally Posted by cornerstone

Man that is a nice piece! I say leave it SS. I may have to "borrow" that idea.

How do you remove the center hub piece? Did you use nutzerts in the brace or thread the holes?

Center hub piece and upper mounting holes thru top rail are threaded into the ss brace with nuts welded to the inside.
Yea, I think i'll just polish the stainless and paint the hub part to keep it from rusting. Thanks for the compliment!
The brace is a piece of 1/8" thick X 5" ss formed channel that I've been saving for years for something.. I finally found out why!

DennisP · 12-11-2019, 03:14 PM

Here is another bonus to this mount! It also is a great storage place for a bottle jack or anything else you can imagine.
NowI need to come up with a trick way to secure it.

chc1955 · 12-11-2019, 03:23 PM

Looks sweet!!!!!

Killer Bee · 12-11-2019, 03:40 PM

that is awesome!

you happen to be in nw oc by chance? might have to steal your idea if I could take a peep at it sometime..

I'd be happy to settle for the plans for a twelve pack

buddy of mine is a fab guru and a good neighbor friend is a fab-ulous also, used to work for jesse james

DennisP · 12-12-2019, 02:11 PM

Quote:

Originally Posted by Killer Bee

that is awesome!

you happen to be in nw oc by chance? might have to steal your idea if I could take a peep at it sometime..

I'd be happy to settle for the plans for a twelve pack

buddy of mine is a fab guru and a good neighbor friend is a fab-ulous also, used to work for jesse james

PM sent Killer. Thanks for the compliment!

Rollo Grande · 12-12-2019, 10:37 PM

Dennis, that is an ingenious piece of work! Now you have to paint your spare wheel, lol.

But seriously, if you make a bolt-in clip to secure the jack, you can hide the whole shebang behind a hubcap.

Tape a $20 bill inside the cap, pad it with some clean rags, add a ziplock bag with a book of matches, pack of smokes, airline bottle of Jack Daniels and a Clif Bar and you've got a serious roadside emergency kit.....

notsolo · 12-13-2019, 10:53 AM

If you make a C clip, "attaches inside tube" that slides in between the plunger, could the jack twist and lock in place?

71gmcC15 · 12-13-2019, 11:55 AM

I was thinkig for the jack you could just use a peace of ss strap across with two lugs bolting it down.

BigBird05 · 12-13-2019, 01:14 PM

Best looking spare tire mount I have seen. I will be "stealing" your idea.

DennisP · 12-13-2019, 02:08 PM

Quote:

Originally Posted by BigBird05

Best looking spare tire mount I have seen. I will be "stealing" your idea.

Thank you very much! And thanks to all! This is how I like to fab things. Simple yet functional.

DennisP · 12-13-2019, 02:13 PM

Quote:

Originally Posted by Rollo Grande

Dennis, that is an ingenious piece of work! Now you have to paint your spare wheel, lol.

But seriously, if you make a bolt-in clip to secure the jack, you can hide the whole shebang behind a hubcap.

Tape a $20 bill inside the cap, pad it with some clean rags, add a ziplock bag with a book of matches, pack of smokes, airline bottle of Jack Daniels and a Clif Bar and you've got a serious roadside emergency kit.....

The possibility's are pretty much endless. I am thinking now though, since I already still have the original jack still strapped down behind the seat, I will probably machine a nice water-prof cap and make up a small tool bag and gloves and stuff it in there.

DennisP · 12-13-2019, 02:14 PM

Quote:

Originally Posted by BigBird05

Best looking spare tire mount I have seen. I will be "stealing" your idea.

Feel free! Looking forward to seeing it.

DennisP · 12-17-2019, 02:24 PM

Finally finished. Painted the ugly old rim, buffed out the stainless, and painted the mount.
Now I just have to get used to that big ol tire sticking out of my bed! I have mixed feelings about it.

Damm sideways pictures!

DennisP · 12-17-2019, 03:09 PM

A couple more. Painted the inside of rim hot rod flatz.

**Ironhorse** · 12-17-2019, 03:25 PM

Read thru your thread and I like what you did for a in-bed spare mount. Very ingenious out of the box thinking. Nice clean install and gives the truck a "period correct" look to the bed.

I have the in-bed factory tire mount I added to the same place in my 71 4x4. Was going to add an under bed spare to my truck until a friend with a newer square body truck told about his last flat on a muddy country road and dropping the spare from under the truck. Decided the factory mount behind the driver's side was something I could live with. Also freed up the needed room to move the gas tank under the bed behind the last cross member.

12-10-2019, 02:56 PM	#1
DennisP Registered User Join Date: Aug 2011 Location: Southern, CA Posts: 141	Fabricated spare tire mount So I recently did a makeover on my 68 C20. New bed wood came out nice but I didn't like the crappy old spare laying on my new bed. After extensive searching on this forum, I decided to fab my own version of a spare tire mount using some metal I had laying around. I set it up to keep the tire just off the bed and side rails. The nice thing about this is I can remove the round part if I need to haul anything large. I am going to paint the pipe. The Back brace is 316 SS. I may just leave it alone. Attached Images Last edited by DennisP; 12-10-2019 at 03:02 PM.

12-10-2019, 04:00 PM	#2
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,482	Re: Fabricated spare tire mount Leave it alone....looks great as is. I did something simular in the 4 corners for tie down straps..in addition to tire mount....Not nearly as nice as yours.....Bed wood looks great too.BTW. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=635605

12-10-2019, 04:32 PM	#4
DennisP Registered User Join Date: Aug 2011 Location: Southern, CA Posts: 141	Re: Fabricated spare tire mount I just realized If you look in the background behind the tire, that's me standing there.

12-10-2019, 04:59 PM	#5
Astro-Balls Registered User Join Date: Feb 2019 Location: Nor Cal Posts: 822	Re: Fabricated spare tire mount Did you use the factory holes for mounting this? Looks great. __________________ 1968 C20 Fleetside 396 4sp PS PB AC CST . https://www.youtube.com/watch?v=RWK8GgWD4uA Last edited by LockDoc; 12-12-2019 at 10:45 AM.

12-11-2019, 12:20 AM	#8
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,442	Re: Fabricated spare tire mount Great Job. Nice Santa Hat you got on. LOL . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

12-11-2019, 01:45 PM	#10
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: Fabricated spare tire mount Man that is a nice piece! I say leave it SS. I may have to "borrow" that idea. How do you remove the center hub piece? Did you use nutzerts in the brace or thread the holes? __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

12-11-2019, 03:14 PM	#12
DennisP Registered User Join Date: Aug 2011 Location: Southern, CA Posts: 141	Re: Fabricated spare tire mount Here is another bonus to this mount! It also is a great storage place for a bottle jack or anything else you can imagine. NowI need to come up with a trick way to secure it. Attached Images

12-11-2019, 03:23 PM	#13
chc1955 Registered User Join Date: Dec 2010 Location: Glendora, CA Posts: 33	Re: Fabricated spare tire mount Looks sweet!!!!!

12-11-2019, 03:40 PM	#14
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,816	Re: Fabricated spare tire mount that is awesome! you happen to be in nw oc by chance? might have to steal your idea if I could take a peep at it sometime.. I'd be happy to settle for the plans for a twelve pack buddy of mine is a fab guru and a good neighbor friend is a fab-ulous also, used to work for jesse james __________________ *I started out with nothing - and I still have most of it* Last edited by LockDoc; 12-12-2019 at 10:42 AM.

12-12-2019, 10:37 PM	#16
Rollo Grande Registered User Join Date: Nov 2019 Location: San Francisco Posts: 8	Re: Fabricated spare tire mount Dennis, that is an ingenious piece of work! Now you have to paint your spare wheel, lol. But seriously, if you make a bolt-in clip to secure the jack, you can hide the whole shebang behind a hubcap. Tape a $20 bill inside the cap, pad it with some clean rags, add a ziplock bag with a book of matches, pack of smokes, airline bottle of Jack Daniels and a Clif Bar and you've got a serious roadside emergency kit.....

12-13-2019, 10:53 AM	#17
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,482	Re: Fabricated spare tire mount If you make a C clip, "attaches inside tube" that slides in between the plunger, could the jack twist and lock in place? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=635605

12-13-2019, 11:55 AM	#18
71gmcC15 Registered User Join Date: Feb 2018 Location: Doland SD Posts: 836	Re: Fabricated spare tire mount I was thinkig for the jack you could just use a peace of ss strap across with two lugs bolting it down. __________________ ( second times the charm) 71 gmc c15 307 sbc 373 rear gears positrac sm 465 trans. ( not listed on spid but is original ) 94 chevy k1500 350 tbi 373 rear gears 4l60e one wheel peel. Gutless 07 gmc sierra classic rcsb 4.3 lt 5 speed w/t 04 chevy Silverado 1500 ext cab 5.3 4l60e. 81 chevy Scottsdale k10 muncie sm465 Np208 10 bolt 8.2 ( Old Green)

12-13-2019, 01:14 PM	#19
BigBird05 Registered User Join Date: Aug 2019 Location: Cheraw Posts: 1,300	Re: Fabricated spare tire mount Best looking spare tire mount I have seen. I will be "stealing" your idea.

12-17-2019, 02:24 PM	#23
DennisP Registered User Join Date: Aug 2011 Location: Southern, CA Posts: 141	Re: Fabricated spare tire mount Finally finished. Painted the ugly old rim, buffed out the stainless, and painted the mount. Now I just have to get used to that big ol tire sticking out of my bed! I have mixed feelings about it. Damm sideways pictures! Attached Images

12-17-2019, 03:09 PM	#24
DennisP Registered User Join Date: Aug 2011 Location: Southern, CA Posts: 141	Re: Fabricated spare tire mount A couple more. Painted the inside of rim hot rod flatz. Attached Images



Register or Log In To remove these advertisements.

12-17-2019, 03:25 PM	#25
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Fabricated spare tire mount Read thru your thread and I like what you did for a in-bed spare mount. Very ingenious out of the box thinking. Nice clean install and gives the truck a "period correct" look to the bed. I have the in-bed factory tire mount I added to the same place in my 71 4x4. Was going to add an under bed spare to my truck until a friend with a newer square body truck told about his last flat on a muddy country road and dropping the spare from under the truck. Decided the factory mount behind the driver's side was something I could live with. Also freed up the needed room to move the gas tank under the bed behind the last cross member. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Register or Log In To remove these advertisements.