Truck all over the lane. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prodjay10 · 12-14-2019, 11:15 PM

What would cause my truck to wander all over the lane? I’ve had the steering box rebuilt but it’s still got a bit of play in the steering wheel. The tie rod ends seemed good.

**mongocanfly** · 12-15-2019, 10:59 AM

Get someone in the truck to saw the wheel back and forth...get under the truck and look for slack points in anything....could also be alignment...I'd find a good alignment shop...
What truck do you have?

**The Rocknrod** · 12-15-2019, 11:03 AM

Alignment Cast may be too little. King pins worn. Since you didn't indicate what year or suspension you have, who knows?

prodjay10 · 12-15-2019, 12:16 PM

1971 C10 stock suspension. Not lowered. Not sure if the steering box was added after.

It did this a bit before the ls swap. But not bad. Now its really difficult to control. Maybe the added weight from 250 to 5.3.

**LockDoc** · 12-15-2019, 12:48 PM

Quote:

Originally Posted by prodjay10

1971 C10 stock suspension. Not lowered. Not sure if the steering box was added after.

It did this a bit before the ls swap. But not bad. Now its really difficult to control. Maybe the added weight from 250 to 5.3.

As mentioned above check the steering components. The weight of the engine shouldn't make that much difference. If you haven't had it done yet get the front end aligned. Toe in/out, the castor (as Rocknrod mentioned) and other alignment problems can cause that.

LockDoc

71cheyennesuperlongb · 12-15-2019, 06:47 PM

Check your drag link. If it is installed backwards it will dart all over the road.

Myself · 01-05-2020, 08:50 PM

I can tell you from experience that not enough caster will cause a front end to wander all over the place!

68 P.O.S. · 01-07-2020, 05:04 PM

As stated above, check the drag link to make sure its not either installed backwards, or from a different year truck. Check alignment as well. Bemerdoc has a good write up for alignment numbers.

LS short box · 01-08-2020, 06:44 PM

If you are running a 5.3 I assume you have a 5.3 style power steering pump. It may be that the 5.3 pump is over assisting your new rebuilt box. I'm about to order a flow restricter from Turn One to see if that helps my LS swapped 68. Mine is way over assisted. It's like driving a 1980's dodge car.

**robnolimit** · 01-10-2020, 11:09 AM

check the idler arm as well

Zippi · 01-16-2020, 10:41 PM

My truck was doing the same thing. The rag joint was worn out and the upper coupling. I pulled it all out and put in a new Borgeson intermediate shaft. Cured all my problems.

LS short box · 01-17-2020, 06:03 PM

Just FYI. I spoke with Turn One. One of their techs was very helpful. He did not recommend their flow restricter for my LS swap. He said it could cause problems with consistent steering response. He said the real problem is the steering box valve. Needs to be reworked to match the LS steering pump. They could mod my steering box for about $250.

12-14-2019, 11:15 PM	#1
prodjay10 Registered User Join Date: Jun 2016 Location: Phoenix AZ Posts: 429	Truck all over the lane. What would cause my truck to wander all over the lane? I’ve had the steering box rebuilt but it’s still got a bit of play in the steering wheel. The tie rod ends seemed good.

12-15-2019, 10:59 AM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,674	Re: Truck all over the lane. Get someone in the truck to saw the wheel back and forth...get under the truck and look for slack points in anything....could also be alignment...I'd find a good alignment shop... What truck do you have? __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

12-15-2019, 11:03 AM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Truck all over the lane. Alignment Cast may be too little. King pins worn. Since you didn't indicate what year or suspension you have, who knows? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 12-15-2019 at 12:11 PM.

12-15-2019, 12:16 PM	#4
prodjay10 Registered User Join Date: Jun 2016 Location: Phoenix AZ Posts: 429	Re: Truck all over the lane. 1971 C10 stock suspension. Not lowered. Not sure if the steering box was added after. It did this a bit before the ls swap. But not bad. Now its really difficult to control. Maybe the added weight from 250 to 5.3.

12-15-2019, 06:47 PM	#6
71cheyennesuperlongb Registered User Join Date: Aug 2015 Location: Alcoa;Tn Posts: 208	Re: Truck all over the lane. Check your drag link. If it is installed backwards it will dart all over the road. __________________ '71 Cheyenne Super LWB - Second Owner in 39 Years! '70 CST/10 SWB - Soon to be Daughter's truck when finished

01-05-2020, 08:50 PM	#7
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,144	Re: Truck all over the lane. I can tell you from experience that not enough caster will cause a front end to wander all over the place!

01-07-2020, 05:04 PM	#8
68 P.O.S. Registered User Join Date: Jan 2007 Location: Puyallup, WA Posts: 1,662	Re: Truck all over the lane. As stated above, check the drag link to make sure its not either installed backwards, or from a different year truck. Check alignment as well. Bemerdoc has a good write up for alignment numbers. __________________ 72 C10 lwb fleetside -stock 350/350 combo

01-08-2020, 06:44 PM	#9
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 2,138	Re: Truck all over the lane. If you are running a 5.3 I assume you have a 5.3 style power steering pump. It may be that the 5.3 pump is over assisting your new rebuilt box. I'm about to order a flow restricter from Turn One to see if that helps my LS swapped 68. Mine is way over assisted. It's like driving a 1980's dodge car.

01-10-2020, 11:09 AM	#10
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: Truck all over the lane. check the idler arm as well __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

01-16-2020, 10:41 PM	#11
Zippi Registered User Join Date: Nov 2019 Location: Southern Indiana Posts: 588	Re: Truck all over the lane. My truck was doing the same thing. The rag joint was worn out and the upper coupling. I pulled it all out and put in a new Borgeson intermediate shaft. Cured all my problems. __________________ If you can't fix it with duct tape, it's an electrical problem. 1949 5 Window 3100 https://zippi6.wixsite.com/adtruck

01-17-2020, 06:03 PM	#12
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 2,138	Re: Truck all over the lane. Just FYI. I spoke with Turn One. One of their techs was very helpful. He did not recommend their flow restricter for my LS swap. He said it could cause problems with consistent steering response. He said the real problem is the steering box valve. Needs to be reworked to match the LS steering pump. They could mod my steering box for about $250.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.