por-15 engine paint? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dmurphy68 · 12-06-2003, 10:14 AM

Has any one used it ? how does it work . does it hold up well?
thanks
Darren
link to there site

Tx Firefighter · 12-06-2003, 10:20 AM

I just finished doing my core support with POR15 paint. I am VERY impressed with it. I'm going to order their Chevy orange engine paint kit to do my engine with next week.

There was a thread about POR15 on another board I frequent a couple of weeks ago, and pretty much everyone there also said good stuff about it too.

POR15 is extremely impressive!

cdowns · 12-06-2003, 11:54 AM

i recently tried the por15 engine paint and was very disappointed with it it required many coats to cover and had poor consistansy took over 24 hours to dry between coats i finally gave up on it wire brushed it all off and did my engine with spray can from VHT i've used regular por 15 for many years with excellent results but would never try their engine enamel again

*Gee_Emm* · 12-06-2003, 12:08 PM

I bought a can that I have yet to apply, I have used the high temp factory manifold gray coating though, it looks great.

Tx Firefighter · 12-06-2003, 12:39 PM

CDOWNS-

Did you put the POR engine paint over POR15 or over your bare engine?

cdowns · 12-06-2003, 12:50 PM

i primed the engine with their ti-coatprimer

**old Rusty C10** · 12-06-2003, 12:57 PM

ive never had a problem with the regular engine paint from VHT or the stuff that pep boys sells i dont think Por 15 will make that much of a difference to warrant using it

12-06-2003, 10:14 AM	#1
dmurphy68 Registered User Join Date: Nov 2002 Location: Middletown ohio Posts: 1,058	por-15 engine paint? Has any one used it ? how does it work . does it hold up well? thanks Darren link to there site __________________ The very atmosphere of firearms everywhere restrains evil interference. When firearms go, all goes, we need them every hour. - George Washington No free man shall be debarred the use of arms - Thomas Jefferson Later Darren http://www.myspace.com/dmurphy68

12-06-2003, 10:20 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I just finished doing my core support with POR15 paint. I am VERY impressed with it. I'm going to order their Chevy orange engine paint kit to do my engine with next week. There was a thread about POR15 on another board I frequent a couple of weeks ago, and pretty much everyone there also said good stuff about it too. POR15 is extremely impressive! __________________ I'm on the Instagram- @Gearhead_Kevin

12-06-2003, 11:54 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	i recently tried the por15 engine paint and was very disappointed with it it required many coats to cover and had poor consistansy took over 24 hours to dry between coats i finally gave up on it wire brushed it all off and did my engine with spray can from VHT i've used regular por 15 for many years with excellent results but would never try their engine enamel again __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-06-2003, 12:39 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	CDOWNS- Did you put the POR engine paint over POR15 or over your bare engine? __________________ I'm on the Instagram- @Gearhead_Kevin

12-06-2003, 12:50 PM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	i primed the engine with their ti-coatprimer __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-06-2003, 12:08 PM	#4
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	I bought a can that I have yet to apply, I have used the high temp factory manifold gray coating though, it looks great.

12-06-2003, 12:57 PM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	ive never had a problem with the regular engine paint from VHT or the stuff that pep boys sells i dont think Por 15 will make that much of a difference to warrant using it __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.