Looking for a control arm mount bracket for 67 C10

[Sono07]

Scratching my head on this one. Does anyone know where I could buy the mounting bracket for a 2wd short bed c10? So far all I see is newer model stuff and a couple of old dead links. Any help is appreciated.

[kwmech]

What exactly are we talking about

[Sono07]

Originally Posted by kwmech

What exactly are we talking about

The bracket/mount between the upper control arm and frame I believe.

[cypressbog]

Please note you must be a subscribing member to post want to buy threads on this forum. Please look up and click on Subscribe and follow the directions to pay for a membership. You will then be able to post your want to buy post in the correct area.

[weq92f]

.
You could scour the parts sections here looking for it without being a paying member. Just asking "where" is OK too methinks if you don't know and want to know...

In that case...the salvage yards may be helpful in this case or even some of the Online yards may have something.

However if you want to post WTB then you need to pay up as stated!

-klb

[projectking]

Looking for the dog bone or the bracket that’s riveted to the crossmember?

https://www.partsgeek.com/gbproducts...-05044701.html

[saxart]

I think he's looking for the two greyed-out L-shaped brackets that don't have part numbers in the upper left hand corner of this page:

https://www.lmctruck.com/1967-72-che...-2-wheel-drive

[projectking]

Originally Posted by saxart

I think he's looking for the two greyed-out L-shaped brackets that don't have part numbers in the upper left hand corner of this page:

https://www.lmctruck.com/1967-72-che...-2-wheel-drive

This makes it easier, this is the one I’m asking about

[Sono07]

My bad fellows, I was hoping for a link to an aftermarket supplier or just a part number.
That L shaped bracket in the LMC pic is what I am looking for I just didn't see a part number on their page and couldn't find it anywhere else.

[Jason Banks]

Call Bill - http://www.vintagechevytrucks.com/ bay area California but moving to Oregon.

Jason at Greens Restoration in Cameron TX 254-482-0186 Text.

Manes Truck Parts near Kansas City has used parts. manestruckparts.com

Pickmup is a member here in Olympia WA. https://www.facebook.com/pages/Frank...69528676394750

You could look here for venors that support this board, but it doesn't really help you find which ones have used parts = http://67-72chevytrucks.com/vboard/s...d.php?t=443539

Hopefully someone else will chime in with some of the other big user parts places contact info. They may even be one near you. What state is Greenwood in?

[BigBird05]

What state are you from? I know of 2 trucks in a junk yard in Ruby S.C.

[kwmech]

Originally Posted by Sono07

My bad fellows, I was hoping for a link to an aftermarket supplier or just a part number.
That L shaped bracket in the LMC pic is what I am looking for I just didn't see a part number on their page and couldn't find it anywhere else.

That part is welded to the x-member and will have to sourced and torched off, and cleaned off. Try to find someone who has swapped out the entire x-member to convert to late model disc front end

[Sono07]

Originally Posted by BigBird05

What state are you from? I know of 2 trucks in a junk yard in Ruby S.C.

Thanks fellows, I am indeed in Greenwood SC.
Any info would be greatly appreciated, thanks guys.

[BigBird05]

looks like Greenville is about 3 hrs from Ruby. We could meet there and go get your part or I can get it and you can pick it up from me. I think it might be to heavy to ship. D

[projectking]

Originally Posted by Sono07

My bad fellows, I was hoping for a link to an aftermarket supplier or just a part number.
That L shaped bracket in the LMC pic is what I am looking for I just didn't see a part number on their page and couldn't find it anywhere else.

I’ll remove the rivets and send it it you needed

[Sono07]

Thanks guys I ended up finding a pair of brackets. I appreciate all the help.