WTB: 4x4 transmission cross-member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Destructo · 12-07-2003, 12:54 AM

Welp, took a little wheeling trip to Uwharrie and tore up my cross-member, so I now need to get another one! Next time though its going to be 4" higher and hopefully riding on 35" rubber. Won't be tearing it up again if I can help it.

loweredd · 12-08-2003, 05:20 PM

What year do you need? I have a 73-81 with one that I could unbolt and ship. How about $15 + shipping?

Destructo · 12-08-2003, 07:41 PM

Got an 85, don't think 73-81 will work. Aren't those the ones that are flat all the way accross? I found several of those at the yard today but none that have the humps like mine. I'm going to check a couple other yards tomorrow I think i'll find one, I hope so anyway. I just noticed today I actually hit the rock hard enough to bend the frame where the member attaches, nothing a little hammering won't fix though. I shouldn't have this problem next time as I have a set of brand new 4" lift springs sitting next to me now, well the back ones anyway gotta order the rest of the kit soon.

BIGCHEVYMAN · 12-08-2003, 08:18 PM

i have one fron a 85 chevy truck that came with the sm465 and a np208 t-case. i took those out and put in a sm465 with a np205 and had to use the cross member that came in that truck.

Destructo · 12-08-2003, 08:40 PM

I have an 700r4 auto, not sure if a manual and auto are the same member.

ElGracho · 12-08-2003, 09:09 PM

I have one out of an 85 blazer with a 700R4/NP 208. It's just sitting here collecting dust. I didn't use it on my 84 since mine is the straight across style. I'll send it for $15 + actual shipping.

Destructo · 12-08-2003, 10:11 PM

I'm going to a couple more yards tomorrow, if I can't find one i'll let ya know and get you to figure shipping and send you the money for it.

12-07-2003, 12:54 AM	#1
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	WTB: 4x4 transmission cross-member Welp, took a little wheeling trip to Uwharrie and tore up my cross-member, so I now need to get another one! Next time though its going to be 4" higher and hopefully riding on 35" rubber. Won't be tearing it up again if I can help it.

12-08-2003, 08:18 PM	#4
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	crossmember i have one fron a 85 chevy truck that came with the sm465 and a np208 t-case. i took those out and put in a sm465 with a np205 and had to use the cross member that came in that truck.

12-08-2003, 09:09 PM	#6
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	I have one out of an 85 blazer with a 700R4/NP 208. It's just sitting here collecting dust. I didn't use it on my 84 since mine is the straight across style. I'll send it for $15 + actual shipping. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

12-08-2003, 05:20 PM	#2
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	What year do you need? I have a 73-81 with one that I could unbolt and ship. How about $15 + shipping?

12-08-2003, 07:41 PM	#3
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Got an 85, don't think 73-81 will work. Aren't those the ones that are flat all the way accross? I found several of those at the yard today but none that have the humps like mine. I'm going to check a couple other yards tomorrow I think i'll find one, I hope so anyway. I just noticed today I actually hit the rock hard enough to bend the frame where the member attaches, nothing a little hammering won't fix though. I shouldn't have this problem next time as I have a set of brand new 4" lift springs sitting next to me now, well the back ones anyway gotta order the rest of the kit soon.

12-08-2003, 08:40 PM	#5
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	I have an 700r4 auto, not sure if a manual and auto are the same member.

12-08-2003, 10:11 PM	#7
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	I'm going to a couple more yards tomorrow, if I can't find one i'll let ya know and get you to figure shipping and send you the money for it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.