i have no reverse *^%&%$#$%^$$ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

special70gmc · 12-07-2003, 06:28 PM

i got my new engine running and go into drive and go folward about 4 ft and go to back up and you could feel it engage but it doesnt move, the drive shaft moves a quarter turn then stops and acts like its in nutral. i did put a shift kit in it before the engine went in. this really sucks btw its a th350 what did i do wrong? thanks -kyle

cableguy0 · 12-07-2003, 06:45 PM

pull the valve body back off and make sure you put the balls in the correct place on the valve body.it was working ok before you put the shift kit in right? and what brand shift kit was it

special70gmc · 12-07-2003, 08:37 PM

i remember thinking when i was bolting the valve body back on if i put the balls in correctly and i just kept bolting it nack down. i knew i shouda double checked..............damn it was a b&m transpak -kyle

Longhorn Man · 12-07-2003, 08:51 PM

You double checked the fluid?

special70gmc · 12-07-2003, 10:43 PM

yes fluids good evan put a half quart extra to see if would start to work. looks like i have a red bath in my furure. thanks -kyle

12-07-2003, 06:28 PM	#1
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	*i have no reverse ^%&%$#$%^$$** i got my new engine running and go into drive and go folward about 4 ft and go to back up and you could feel it engage but it doesnt move, the drive shaft moves a quarter turn then stops and acts like its in nutral. i did put a shift kit in it before the engine went in. this really sucks btw its a th350 what did i do wrong? thanks -kyle __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

12-07-2003, 06:45 PM	#2
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	pull the valve body back off and make sure you put the balls in the correct place on the valve body.it was working ok before you put the shift kit in right? and what brand shift kit was it __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

12-07-2003, 08:37 PM	#3
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	i remember thinking when i was bolting the valve body back on if i put the balls in correctly and i just kept bolting it nack down. i knew i shouda double checked..............damn it was a b&m transpak -kyle __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

12-07-2003, 10:43 PM	#5
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	yes fluids good evan put a half quart extra to see if would start to work. looks like i have a red bath in my furure. thanks -kyle __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

12-07-2003, 08:51 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	You double checked the fluid?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.