Stack's for the Ramp - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 02-21-2020, 08:06 PM

I found these on F/B market place. 60" stack's for $70.00! Drove 1 hr to get them. The guy had several old Ford trucks and a couple of caddies out in his side yard. We got to talking about vehicles and looking at the stack's he said man you drove 1hr for them I'll take $50.00 for them!
I looked at him and said sold.
I got home and had to see how they are gonna look once mounted. I think they will be just fine.

**68bowtie** · 02-21-2020, 08:57 PM

YES!! You have chosen... wisely.

**67 twins** · 02-22-2020, 02:23 AM

Oh yeah I like how that looks

KQQL IT · 02-22-2020, 03:09 AM

You could turn them out at least 45° or even 90°

**special-K** · 02-22-2020, 01:28 PM

Don't forget about them being up there

I can't wait till the video, the start-up and the drive-by

**kidatheart** · 02-22-2020, 02:20 PM

Personally, I wouldn't want it any other way!

Andy4639 · 02-22-2020, 11:12 PM

Quote:

Originally Posted by special-K

Don't forget about them being up there

I can't wait till the video, the start-up and the drive-by

Me too! I'm sub to this for sure!

**Stephen717** · 02-24-2020, 12:09 PM

Nice

can't wait to hear it myself.

72LB · 02-25-2020, 10:11 AM

Keep in mind Andy your going to have to put cans over them when it rains, aside from that they look killer on it.

Andy4639 · 02-25-2020, 10:25 AM

Quote:

Originally Posted by 72LB

Keep in mind Andy your going to have to put cans over them when it rains, aside from that they look killer on it.

Yea I have to figure out some kind of covers for them. I guess. Maybe make some cool covers with handles. They have some bend to them so they maybe OK.
Like these.

**biketopia** · 02-25-2020, 12:05 PM

You'll be fine with the slash cuts on them, no need for buckets or caps. Just don't let it sit for a year without running it after a noahs ark type rain.

67C10Step · 02-25-2020, 02:42 PM

That is a rig that is perfect for stacks. I say turn the outlet on the 45 and you will be golden.

72LB · 02-25-2020, 06:16 PM

Quote:

Originally Posted by Andy4639

Yea I have to figure out some kind of covers for them. I guess. Maybe make some cool covers with handles. They have some bend to them so they maybe OK.
Like these.

Those leak.

**special-K** · 02-25-2020, 10:19 PM

Those flappers are for straight stacks. If you're not pumping some compression they go tink tink tink while it idles. Watch that video I posted

Andy4639 · 02-25-2020, 11:11 PM

Quote:

Originally Posted by special-K

Those flappers are for straight stacks. If you're not pumping some compression they go tink tink tink while it idles. Watch that video I posted

I guess I will just see how it goes. Maybe drill small weep holes in the bottom of the exhaust for the water to drain out maybe.

**'68OrangeSunshine** · 02-25-2020, 11:14 PM

Boss set-up, Hoss.

Andy4639 · 02-25-2020, 11:15 PM

Quote:

Originally Posted by '68OrangeSunshine

Boss set-up, Hoss.

Thanks.

**special-K** · 02-26-2020, 08:16 AM

Quote:

Originally Posted by Andy4639

I guess I will just see how it goes. Maybe drill small weep holes in the bottom of the exhaust for the water to drain out maybe.

Or petcocks maybe

72LB · 02-26-2020, 08:47 AM

Quote:

Originally Posted by special-K

Or petcocks maybe

That's is a good idea if water becomes an issue and you wouldn't have a exhaust leak thru a weep hole.

**biketopia** · 02-26-2020, 11:02 AM

maaan, I want a ramp truck in the worst way haha.

Andy4639 · 02-26-2020, 11:53 AM

Quote:

Originally Posted by special-K

Or petcocks maybe

I like this Tim. I may add a set even if I do the cover's.

Wootdog · 02-26-2020, 02:28 PM

Those stacks make me think of the one's my dad had on his truck back in the day. I love the truck. If I had one, I would probably bring too many more projects home.
V/R
Kerry

**biketopia** · 02-26-2020, 03:47 PM

Quote:

Originally Posted by Andy4639

I like this Tim. I may add a set even if I do the cover's.

I wouldn't do any fixed cap, the flapper is cool at first, but gets old quick plus they only work on straight cut. The pet cock isn't a horrible Idea, if you can weld a nut, use a bolt with some high temp silicone that would seal you up quick and always come out. Your slash's wont have an issue, all our John Deer and Cat machines have em, we don't cover them ever. If you are concerned I'd grab a few soft Nerf type balls to stuff in the ends if you're going to leave it parked for a long time.

Andy4639 · 02-26-2020, 04:10 PM

Quote:

Originally Posted by biketopia

I wouldn't do any fixed cap, the flapper is cool at first, but gets old quick plus they only work on straight cut. The pet cock isn't a horrible Idea, if you can weld a nut, use a bolt with some high temp silicone that would seal you up quick and always come out. Your slash's wont have an issue, all our John Deer and Cat machines have em, we don't cover them ever. If you are concerned I'd grab a few soft Nerf type balls to stuff in the ends if you're going to leave it parked for a long time.

Those flapper I would think wouldn't take long to get on my nerves going down the road. The balls may work also. Just keep several in the cab so if I forget and blow them out!

KQQL IT · 02-26-2020, 04:53 PM

Dual stack Peterbilts have an 1/8" hole in the Y besides if the lowest point is below the exhaust ports it'll never fill anything important. And if it does you've bigger problems than your stacks.

02-21-2020, 08:06 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Stack's for the Ramp I found these on F/B market place. 60" stack's for $70.00! Drove 1 hr to get them. The guy had several old Ford trucks and a couple of caddies out in his side yard. We got to talking about vehicles and looking at the stack's he said man you drove 1hr for them I'll take $50.00 for them! I looked at him and said sold. I got home and had to see how they are gonna look once mounted. I think they will be just fine. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-21-2020, 08:57 PM	#2
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,838	Re: Stack's for the Ramp YES!! You have chosen... wisely. __________________ Project "C10 Fever" (68 factory black 396 swb) Project “Faded Glory” (71 c10 med bronze original paint refresh) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

02-22-2020, 02:23 AM	#3
67 twins Senior Member Join Date: Mar 2019 Location: Herculaneum MO (20 minutes south of St. Louis Posts: 688	Re: Stack's for the Ramp Oh yeah I like how that looks __________________ 67 C10 283 T5 swapped longbed fleetside = wife's daily driver 67 C20 292 (originally a 250)4speed longbed fleetside w/original wooden bed=my project truck 67 C10 283+.060 (so a 292 as well)T5 swapped longbed fleetside=my DD 72 C1500 Sierra Grande 350 TH350 longbed fleetside=wife's fair weather truck Can you tell we are fans of longbed fleetsides & 67s Chris

02-22-2020, 03:09 AM	#4
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,322	Re: Stack's for the Ramp You could turn them out at least 45° or even 90° Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

02-22-2020, 01:28 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Stack's for the Ramp Don't forget about them being up there I can't wait till the video, the start-up and the drive-by __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-22-2020, 02:20 PM	#6
kidatheart Senior Member Join Date: May 2012 Location: Assaria, Ks Posts: 465	Re: Stack's for the Ramp Personally, I wouldn't want it any other way!

02-24-2020, 12:09 PM	#8
Stephen717 Senior Member Join Date: Aug 2016 Location: Loris South Carolina Posts: 429	Re: Stack's for the Ramp Nice can't wait to hear it myself.

02-25-2020, 10:11 AM	#9
72LB Registered User Join Date: May 2017 Location: Inman/Boiling Springs, SC Posts: 420	Re: Stack's for the Ramp Keep in mind Andy your going to have to put cans over them when it rains, aside from that they look killer on it. __________________ 1985 C10 shortbed, current project. Member of the Upstate SC GM Truck Club.

02-25-2020, 12:05 PM	#11
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,126	Re: Stack's for the Ramp You'll be fine with the slash cuts on them, no need for buckets or caps. Just don't let it sit for a year without running it after a noahs ark type rain. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

02-25-2020, 02:42 PM	#12
67C10Step Registered User Join Date: Jul 2019 Location: Harrison, AR Posts: 2,488	Re: Stack's for the Ramp That is a rig that is perfect for stacks. I say turn the outlet on the 45 and you will be golden. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

02-25-2020, 10:19 PM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Stack's for the Ramp Those flappers are for straight stacks. If you're not pumping some compression they go tink tink tink while it idles. Watch that video I posted __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-25-2020, 11:14 PM	#16
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,641	Re: Stack's for the Ramp Boss set-up, Hoss. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

02-26-2020, 11:02 AM	#20
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,126	Re: Stack's for the Ramp maaan, I want a ramp truck in the worst way haha. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

02-26-2020, 02:28 PM	#22
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,688	Re: Stack's for the Ramp Those stacks make me think of the one's my dad had on his truck back in the day. I love the truck. If I had one, I would probably bring too many more projects home. V/R Kerry __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

02-26-2020, 04:53 PM	#25
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,322	Re: Stack's for the Ramp Dual stack Peterbilts have an 1/8" hole in the Y besides if the lowest point is below the exhaust ports it'll never fill anything important. And if it does you've bigger problems than your stacks. __________________ " That didnt make it any newer " " Dont antique the equipment "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.