TX WTB: Exhaust bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jeff's72C10* · 02-23-2020, 08:13 PM

All, I'm in need of a exhaust clamp mount bracket for the right hand/passenger side rear of my 72. The left side is there as you can see in the pic, however the RH side isn't. Appreciate any help if someone has one available. Thx Jeff

I'm learning that pre 73 trucks most likely only had the drivers side. If that's the case, if anyone knows where I can get one it would be appreciated. If the LH can be adapted to the RH side I'll try that. thx again

Name: 87295002_3150064281684285_98216831088590848_n.jpg
Views: 230
Size: 94.6 KB

Name: 87295002_3150064281684285_98216831088590848_n.jpg
Views: 230
Size: 94.6 KB

Name: 87302086_3150064355017611_6444877566162501632_n.jpg
Views: 243
Size: 71.0 KB

Jeff's72C10* · 02-24-2020, 08:37 PM

ttt

I'm learning that pre 73 trucks most likely only had the drivers side. If that's the case, if anyone knows where I can get one it would be appreciated. If the LH can be adapted to the RH side I'll try that. thx again

*randy500* · 02-24-2020, 10:48 PM

That bracket style is 72 only.
Big block 72 trucks had dual exhaust and a RH bracket. Usually they sell as a set.
You can use the drivers side on the passenger side and there are holes in the frame for the bracket. The pass side is symmetrically opposite of the drivers side.

*randy500* · 02-24-2020, 10:49 PM

There is also a big block bracket under the cab....that one is special, has upper corner “cut off” to clear the fuel and brake lines.

Jeff's72C10* · 02-24-2020, 11:14 PM

Quote:

Originally Posted by randy500

That bracket style is 72 only.
Big block 72 trucks had dual exhaust and a RH bracket. Usually they sell as a set.
You can use the drivers side on the passenger side and there are holes in the frame for the bracket. The pass side is symmetrically opposite of the drivers side.

Thanks Randy. Took me some research to figure it all out. I'll guess I'll try to find another LH and flip it. Was hoping some of the folks on here that move a lot of parts might have one or the set, but that doesn't seem to be right now.

**davischevy** · 02-24-2020, 11:26 PM

Big Block exhaust brackets don't sell often any more, especially 72's. It's one of those things you just have to wait and check the parts for sale everyday. You will eventually snag a set.

**SoCoC10** · 02-24-2020, 11:34 PM

I have the part circled in the picture. If your interested just pay shipping and you can have it.

Jeff's72C10* · 02-24-2020, 11:41 PM

Quote:

Originally Posted by SoCoC10

I have the part circled in the picture. If your interested just pay shipping and you can have it.

I actually need the part above it also that attaches to the frame. I will take the part you have, if that's ok? What is the cost to ship to 78840? Thx

Jeff's72C10* · 04-10-2020, 11:31 PM

Quote:

Originally Posted by SoCoC10

I have the part circled in the picture. If your interested just pay shipping and you can have it.

If you still have the part I will take it. Shipping to 78840, appreciate your help. Sorry it took awhile to reply been in and out of town. Thanks again

**SoCoC10** · 04-21-2020, 11:40 AM

Quote:

Originally Posted by Jeff's72C10*

If you still have the part I will take it. Shipping to 78840, appreciate your help. Sorry it took awhile to reply been in and out of town. Thanks again

If this is what you looking for? I’ll PM you my PayPal

**CUSTOM/10** · 04-21-2020, 12:14 PM

PM sent.

Jeff's72C10* · 04-21-2020, 01:36 PM

Quote:

Originally Posted by SoCoC10

If this is what you looking for? I’ll PM you my PayPal

Yes that is the part. I really appreciate it. thx

Jeff's72C10* · 04-21-2020, 01:41 PM

Quote:

Originally Posted by SoCoC10

If this is what you looking for? I’ll PM you my PayPal

Paypal sent. Thanks again

02-23-2020, 08:13 PM	#1
Jeff's72C10* Active Member Join Date: Mar 2018 Location: Del Rio Posts: 166	WTB: Exhaust bracket All, I'm in need of a exhaust clamp mount bracket for the right hand/passenger side rear of my 72. The left side is there as you can see in the pic, however the RH side isn't. Appreciate any help if someone has one available. Thx Jeff I'm learning that pre 73 trucks most likely only had the drivers side. If that's the case, if anyone knows where I can get one it would be appreciated. If the LH can be adapted to the RH side I'll try that. thx again __________________ Previous C10's 69 SB CST - sold 72 Cheyenne Super LB - sold Last edited by Jeff's72C10; 02-24-2020 at 08:38 PM. Reason: better info*

02-24-2020, 08:37 PM	#2
Jeff's72C10* Active Member Join Date: Mar 2018 Location: Del Rio Posts: 166	Re: WTB: Exhaust bracket ttt I'm learning that pre 73 trucks most likely only had the drivers side. If that's the case, if anyone knows where I can get one it would be appreciated. If the LH can be adapted to the RH side I'll try that. thx again __________________ Previous C10's 69 SB CST - sold 72 Cheyenne Super LB - sold Last edited by Jeff's72C10; 02-24-2020 at 08:38 PM. Reason: info*

02-24-2020, 10:48 PM	#3
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB: Exhaust bracket That bracket style is 72 only. Big block 72 trucks had dual exhaust and a RH bracket. Usually they sell as a set. You can use the drivers side on the passenger side and there are holes in the frame for the bracket. The pass side is symmetrically opposite of the drivers side.

02-24-2020, 10:49 PM	#4
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB: Exhaust bracket There is also a big block bracket under the cab....that one is special, has upper corner “cut off” to clear the fuel and brake lines.

02-24-2020, 11:26 PM	#6
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,807	Re: WTB: Exhaust bracket Big Block exhaust brackets don't sell often any more, especially 72's. It's one of those things you just have to wait and check the parts for sale everyday. You will eventually snag a set. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

02-24-2020, 11:34 PM	#7
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,175	Re: WTB: Exhaust bracket I have the part circled in the picture. If your interested just pay shipping and you can have it. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

04-21-2020, 12:14 PM	#11
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,806	Re: WTB: Exhaust bracket PM sent. __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.