Gauge cluster panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OregonNed · 03-02-2020, 11:09 AM

Were there different gauge panels for trucks with the wood grain faces? Curious if so. I know both I've had have the textured surface, and if one purchases the wood grain decal cover, does it adhere properly? Thanks!

**TBONE1964** · 03-02-2020, 11:14 AM

Quote:

Originally Posted by OregonNed

Were there different gauge panels for trucks with the wood grain faces? Curious if so. I know both I've had have the textured surface, and if one purchases the wood grain decal cover, does it adhere properly? Thanks!

Hi Ned, the material on the stock bezels was just a thicker better quality.

These new wood grain bezels are not nearly the quality the originals were.

Based on part number stamp on rear side of bezel, same part number for wood grain.

Hope this helps

OregonNed · 03-02-2020, 11:30 AM

Thank you. I am thinking about completing my dash with wood veneer like the glove box, but as raised as it is to about as flush as the trim, I am not sure it would work..

03-02-2020, 11:09 AM	#1
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Gauge cluster panels Were there different gauge panels for trucks with the wood grain faces? Curious if so. I know both I've had have the textured surface, and if one purchases the wood grain decal cover, does it adhere properly? Thanks! __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

03-02-2020, 11:30 AM	#3
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Gauge cluster panels Thank you. I am thinking about completing my dash with wood veneer like the glove box, but as raised as it is to about as flush as the trim, I am not sure it would work.. __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.