Soften dash pad - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71gmcC15 · 04-05-2020, 12:55 PM

I got a new dash pad out of a 72 chevy c20 and was wondering if there is a way to soften it up. Its really brittle.

**HO455** · 04-05-2020, 01:01 PM

I have a friend who restores old porsches and he swears by WD40.

71gmcC15 · 04-05-2020, 01:25 PM

Quote:

Originally Posted by HO455

I have a friend who restores old porsches and he swears by WD40.

Mmm. Might give it a shot.

Astro-Balls · 04-05-2020, 02:23 PM

I dont think anything will soften it to the point it will be flexible enough not to crack.
I have recovered many dash pads, once they are cracked or brittle, they are toast.

71gmcC15 · 04-05-2020, 04:07 PM

Quote:

Originally Posted by Astro-Balls

I dont think anything will soften it to the point it will be flexible enough not to crack.
I have recovered many dash pads, once they are cracked or brittle, they are toast.

Good info. This dash pad has a few vary small cracks and some worping. I was hoping that maby I could stop it. Sound like its already to late.

71gmcC15 · 04-05-2020, 05:32 PM

No thread is complete with out at least one picture. I used JB 80. Did not have wd 40

**Stocker** · 04-05-2020, 05:42 PM

Quote:

Originally Posted by 71gmcC15

No thread is complete with out at least one picture. I used JB 80. Did not have wd 40

You might be the only man ever to admit to not having any WD-40.

j/k

That dash pad looks pretty crusty to me. Good luck.

71gmcC15 · 04-06-2020, 10:43 AM

Quote:

Originally Posted by Stocker

You might be the only man ever to admit to not having any WD-40.

j/k

That dash pad looks pretty crusty to me. Good luck.

Haha its says JB 80 is twice as good as wd40 right on the can I also have liquid wrench and pb blaster.

**special-K** · 04-06-2020, 11:21 AM

That's what I was going to say "Twice as good". A man in the know uses 80. WD40 is for the GP

I wonder how a penetrating oil would work. Would it penetrate the pores?

gcburdic · 04-06-2020, 11:38 AM

The WD40 or JP80, even the PB Blaster or liquid wrench will DEFINITELY give it that "New Truck" smell!!!

**special-K** · 04-06-2020, 12:37 PM

I was thinking that, New truck smell or out in the garage smell? No problem. Any alcohol-based solvent will the residue away

71gmcC15 · 04-06-2020, 01:09 PM

That's what I was thinking. That it would soke into it and maby just maby soften it up just a little bit over time. As for the smell I dont mind it one bit. Anything better then rat nest smell. I did not worry about the oil residue because armor all is just as bad.

04-05-2020, 12:55 PM	#1
71gmcC15 Registered User Join Date: Feb 2018 Location: Doland SD Posts: 836	Soften dash pad I got a new dash pad out of a 72 chevy c20 and was wondering if there is a way to soften it up. Its really brittle. __________________ ( second times the charm) 71 gmc c15 307 sbc 373 rear gears positrac sm 465 trans. ( not listed on spid but is original ) 94 chevy k1500 350 tbi 373 rear gears 4l60e one wheel peel. Gutless 07 gmc sierra classic rcsb 4.3 lt 5 speed w/t 04 chevy Silverado 1500 ext cab 5.3 4l60e. 81 chevy Scottsdale k10 muncie sm465 Np208 10 bolt 8.2 ( Old Green)

04-05-2020, 01:01 PM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,023	Re: Soften dash pad I have a friend who restores old porsches and he swears by WD40. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

04-05-2020, 02:23 PM	#4
Astro-Balls Registered User Join Date: Feb 2019 Location: Nor Cal Posts: 822	Re: Soften dash pad I dont think anything will soften it to the point it will be flexible enough not to crack. I have recovered many dash pads, once they are cracked or brittle, they are toast. __________________ 1968 C20 Fleetside 396 4sp PS PB AC CST . https://www.youtube.com/watch?v=RWK8GgWD4uA

04-05-2020, 05:32 PM	#6
71gmcC15 Registered User Join Date: Feb 2018 Location: Doland SD Posts: 836	Re: Soften dash pad No thread is complete with out at least one picture. I used JB 80. Did not have wd 40 Attached Images __________________ ( second times the charm) 71 gmc c15 307 sbc 373 rear gears positrac sm 465 trans. ( not listed on spid but is original ) 94 chevy k1500 350 tbi 373 rear gears 4l60e one wheel peel. Gutless 07 gmc sierra classic rcsb 4.3 lt 5 speed w/t 04 chevy Silverado 1500 ext cab 5.3 4l60e. 81 chevy Scottsdale k10 muncie sm465 Np208 10 bolt 8.2 ( Old Green)

04-06-2020, 11:21 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Soften dash pad That's what I was going to say "Twice as good". A man in the know uses 80. WD40 is for the GP I wonder how a penetrating oil would work. Would it penetrate the pores? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-06-2020, 11:38 AM	#10
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Soften dash pad The WD40 or JP80, even the PB Blaster or liquid wrench will DEFINITELY give it that "New Truck" smell!!! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

04-06-2020, 12:37 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Soften dash pad I was thinking that, New truck smell or out in the garage smell? No problem. Any alcohol-based solvent will the residue away __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-06-2020, 01:09 PM	#12
71gmcC15 Registered User Join Date: Feb 2018 Location: Doland SD Posts: 836	Re: Soften dash pad That's what I was thinking. That it would soke into it and maby just maby soften it up just a little bit over time. As for the smell I dont mind it one bit. Anything better then rat nest smell. I did not worry about the oil residue because armor all is just as bad. __________________ ( second times the charm) 71 gmc c15 307 sbc 373 rear gears positrac sm 465 trans. ( not listed on spid but is original ) 94 chevy k1500 350 tbi 373 rear gears 4l60e one wheel peel. Gutless 07 gmc sierra classic rcsb 4.3 lt 5 speed w/t 04 chevy Silverado 1500 ext cab 5.3 4l60e. 81 chevy Scottsdale k10 muncie sm465 Np208 10 bolt 8.2 ( Old Green)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.