Parting out 89 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 12-10-2003, 03:44 AM

This is a reg. cab truck, it has 3.73 gears, 208 trans. case, Let me know what your looking for.

cochino12 · 12-10-2003, 02:02 PM

anything left under the hood?

mach158 · 12-10-2003, 05:37 PM

Dude you may be my savior. I need the driver side front half shaft. I also need the bolts it attached with. Looking for something decently cheap. I have a half shaft that is about a 1.5" shorter then maybe i could do a partial trade.

Hoping you can help me here. Please let me know ASAP.

my e-mail is mach158@hotmail.com if ya wanna e-mail me directly.

**old Rusty C10** · 12-10-2003, 07:51 PM

style/color of front seat please also would ya ship it to 08879 in NJ? and price for seat

phantom dually · 12-10-2003, 08:05 PM

How about the glovebox door and ash tray complete?? Thanks

**t korinek** · 12-10-2003, 09:30 PM

The seat is a bench it is a steel blue color it is worn on the driver side & needs recovering, $65 I think shipping by greyhound is around $70. Glovebox door is gone, ashtray $15 + ship. I'll sell the complete front- brakes, half shafts& all for $100

**old Rusty C10** · 12-11-2003, 01:20 AM

i was hoping for something more fancy thanks tho

mach158 · 12-11-2003, 01:24 AM

I only need the driver side half shaft, i would buy all but i can't afford to. Would ya take $20 for the half shaft? Let me know.

xJAZZILLAx · 12-11-2003, 02:04 AM

i am needing the upper and lower radiator fan shroud, thanks

bestchevyfan · 12-12-2003, 09:29 AM

HI, WHAT WOULD YOU WANT FOR THE 208 TRANS CASE? THANKS, BUDDY

**t korinek** · 12-12-2003, 09:46 PM

I'll take $75 + shipping & that would be around $40.

**t korinek** · 12-12-2003, 09:50 PM

I have upper & lower rad. shroud $40 + shipping.

krusty · 12-14-2003, 04:46 PM

Do you still have the grill and the radiator support? Want to change over my 85 to the newer grill

Bowed · 12-14-2003, 10:39 PM

Tom , is it a shortbed frame complete with a cab ?

'89Z71 · 12-15-2003, 01:20 AM

I'm in need of a power window motor, and the gears/worm drive that go along with it. Let me know if you have one and how much you would like for it with shipping to 54026. Thanx, DK

*1FaastC10* · 12-15-2003, 08:29 PM

how about the x shaped crossmember that holds the spare tire in the back? i looked under mine last weekend, and its way rusted out. what would you take for it shipped to 46517, if you're willing to strip the truck down that far.

Street Sled · 12-16-2003, 03:01 PM

Need the plastic panel for the tape player...tan or brown..S/S

**t korinek** · 12-18-2003, 02:53 AM

The complete truck has been sold locally. Thanks, Tom

'89Z71 · 12-18-2003, 01:39 PM

Thanx anyway.
BTW I did find a motor......

12-10-2003, 03:44 AM	#1
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Parting out 89 4x4 This is a reg. cab truck, it has 3.73 gears, 208 trans. case, Let me know what your looking for. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-10-2003, 02:02 PM	#2
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	anything left under the hood? __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

12-10-2003, 07:51 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,276	style/color of front seat please also would ya ship it to 08879 in NJ? and price for seat __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-10-2003, 08:05 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	How about the glovebox door and ash tray complete?? Thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-10-2003, 09:30 PM	#6
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	parts The seat is a bench it is a steel blue color it is worn on the driver side & needs recovering, $65 I think shipping by greyhound is around $70. Glovebox door is gone, ashtray $15 + ship. I'll sell the complete front- brakes, half shafts& all for $100 __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 12-10-2003 at 11:01 PM.

12-10-2003, 05:37 PM	#3
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	Dude you may be my savior. I need the driver side front half shaft. I also need the bolts it attached with. Looking for something decently cheap. I have a half shaft that is about a 1.5" shorter then maybe i could do a partial trade. Hoping you can help me here. Please let me know ASAP. my e-mail is mach158@hotmail.com if ya wanna e-mail me directly.

12-11-2003, 01:20 AM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,276	i was hoping for something more fancy thanks tho __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-11-2003, 01:24 AM	#8
mach158 Registered User Join Date: Sep 2003 Location: Wapello, Iowa Posts: 47	I only need the driver side half shaft, i would buy all but i can't afford to. Would ya take $20 for the half shaft? Let me know.

12-11-2003, 02:04 AM	#9
xJAZZILLAx Will race for cash Join Date: Nov 2003 Location: Burlington,NC Posts: 179	i am needing the upper and lower radiator fan shroud, thanks __________________ 92 chevy stepper,4-bolt flat top 350, Aeromotive carb bypass regulator, holley 650 dbl pumper ,edelbrock performer intake, .530 .545 hyd bump stick, 3/8 sis, guideplates, 2.02 1.60 manley valves,tci street fighter t350 b&m 2500 stall, 3.73 richmond

12-12-2003, 09:29 AM	#10
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: Parting out 89 4x4 HI, WHAT WOULD YOU WANT FOR THE 208 TRANS CASE? THANKS, BUDDY

12-12-2003, 09:46 PM	#11
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	208 Transfer case I'll take $75 + shipping & that would be around $40. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-12-2003, 09:50 PM	#12
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Radiator shroud I have upper & lower rad. shroud $40 + shipping. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-14-2003, 04:46 PM	#13
krusty Registered User Join Date: Dec 2003 Location: Noneya Posts: 9	Do you still have the grill and the radiator support? Want to change over my 85 to the newer grill

12-14-2003, 10:39 PM	#14
Bowed Registered User Join Date: Oct 2002 Location: where it's hot Posts: 1,059	Tom , is it a shortbed frame complete with a cab ?

12-15-2003, 01:20 AM	#15
'89Z71 Registered User Join Date: Jan 2003 Location: Star Prairie WI Posts: 392	I'm in need of a power window motor, and the gears/worm drive that go along with it. Let me know if you have one and how much you would like for it with shipping to 54026. Thanx, DK __________________ '89 GMC Sierra Z71 -"Scream'n Demon" * LOUD PIPES SAVE LIVES * My Truck



Register or Log In To remove these advertisements.

12-15-2003, 08:29 PM	#16
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	how about the x shaped crossmember that holds the spare tire in the back? i looked under mine last weekend, and its way rusted out. what would you take for it shipped to 46517, if you're willing to strip the truck down that far.

12-16-2003, 03:01 PM	#17
Street Sled Registered User Join Date: Oct 2003 Location: Ohio Posts: 146	dash part Need the plastic panel for the tape player...tan or brown..S/S

12-18-2003, 02:53 AM	#18
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	parts truck The complete truck has been sold locally. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-18-2003, 01:39 PM	#19
'89Z71 Registered User Join Date: Jan 2003 Location: Star Prairie WI Posts: 392	Thanx anyway. BTW I did find a motor...... __________________ '89 GMC Sierra Z71 -"Scream'n Demon" * LOUD PIPES SAVE LIVES * My Truck

Register or Log In To remove these advertisements.