|
04-27-2020, 09:18 AM
|
#1 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,319
|
Wood bed finish
What is the best way to finish my wood bed? I can't remember what I used before, but it is easily scratched and pealed in a couple areas. plan to pull the bed out and sand down and reseal.
Thanks Chris
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart  My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
04-27-2020, 07:50 PM
|
#2 |
|
Gentleman Jim Driver
Join Date: Nov 2002
Location: Poulsbo, WA
Posts: 1,550
|
Re: Wood bed finish
Mar - k has several tests they have performed over the years. Most comprehensive I've found.
They are here, about the middle of the page. http://www.mar-k.com/index.php?p=tips-and-tricks
__________________
Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed Last edited by ElGracho; 04-27-2020 at 07:53 PM. Reason: Updated links. |
|
|
|
|
04-28-2020, 09:21 AM
|
#3 |
|
State of Confusion!
  
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,761
|
Re: Wood bed finish
Danish oil. I just redid mine. Any of the oils are good and can be done every couple years to keep the wood from cracking. Urethane and other sealants tend to crack if the truck is used and in the sun a lot.
I was told to use this brand by a professional wood worker. He uses this on all his stuff like house shutters and all that are in the weather. He said it is a better mix than what you can buy at a lot of the bulk-box stores.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
05-04-2020, 11:35 AM
|
#4 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,319
|
Re: Wood bed finish
What about clear coat on the wood?
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
05-04-2020, 12:25 PM
|
#5 |
|
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,761
|
Re: Wood bed finish
Clear coat will crack after a while, then you will have to sand it off to be able to redo it. Anything gets a hard surface like paint or urathane will not flex with the wood and will crack, especially if it is in the sun.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
