I need an emblem measurement please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nu2-72 · 12-10-2003, 10:41 PM

If someone could post a pic and the measurements for a "Chevrolet Custom" emblem on the glovebox door, I would be ever so grateful. Going on my 72.

gregsplace · 12-10-2003, 11:49 PM

I dont have this door no more, so no measurements

gregsplace · 12-10-2003, 11:51 PM

another

teeitup · 12-10-2003, 11:56 PM

6 3/4 like the one on the blue one, I got a new one!

nu2-72 · 12-11-2003, 09:29 PM

Randy, I meant the mounting holes. I have a smooth door now and am going to add the emblem.
Looks like straight down from the edge of the door button. But how far up from the bottom edge or from the center of the ridge?

BLAZERMAN · 12-11-2003, 10:22 PM

Here's what the assembly manual shows.

krazy_texan · 12-12-2003, 02:23 AM

while speaking of glove box emblems, where there any specific trucks that they came on or what cause none of mine have them and i have never personally seen one so what is the deal.

nu2-72 · 12-12-2003, 07:54 PM

Thanks Greg and Rob. I will try to line it up. Rob, calling you.
Crazy Texan, I do not know the answer to that. None of my trucks have emblems but then I have cheap trucks. The truck in question will not be a stock truck and will have a little from every model and more, hence the Custom emblem.
Couldn't find a Hienz 57 emblem.

1970blazin · 12-12-2003, 08:26 PM

Another glovebox emblem question- Where do you get the little "dohickey's"

that go into the hole where you then insert the emblem stud into? I looked at autozone and they were NO help at all. Anyone??

nu2-72 · 12-12-2003, 11:40 PM

I second that question. After looking at Blazermans pic i see that you are not to drill through the back side so no nuts are used. Where do you get those dohickeys?

teeitup · 12-13-2003, 12:43 AM

I got some of those at a parts store, in a packet of dohickey's.

Kevin, I don't think that 4x4 was a cheap truck!!

12-10-2003, 10:41 PM	#1
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I need an emblem measurement please If someone could post a pic and the measurements for a "Chevrolet Custom" emblem on the glovebox door, I would be ever so grateful. Going on my 72. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

12-10-2003, 11:49 PM	#2
gregsplace Senior Member Join Date: Dec 2000 Location: Colwich,Kansas Posts: 713	I dont have this door no more, so no measurements Attached Images __________________ 67 3/4 4x4 402,a/t,flat bed 98 GMC Sierra swb daily driver 87 burb parting out. 68 1/2 chevy, 350/350, 71 gmc frame, kid's beater 69 1ton 396-4sp, dump 69 swb stepside 396/400th current frameup 67 swb 454/400th rebuilding now, oldest boy just rolled it 99,HD, Road King Classic Colwich Ks

12-10-2003, 11:51 PM	#3
gregsplace Senior Member Join Date: Dec 2000 Location: Colwich,Kansas Posts: 713	another Attached Images __________________ 67 3/4 4x4 402,a/t,flat bed 98 GMC Sierra swb daily driver 87 burb parting out. 68 1/2 chevy, 350/350, 71 gmc frame, kid's beater 69 1ton 396-4sp, dump 69 swb stepside 396/400th current frameup 67 swb 454/400th rebuilding now, oldest boy just rolled it 99,HD, Road King Classic Colwich Ks

12-10-2003, 11:56 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	6 3/4 like the one on the blue one, I got a new one! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-11-2003, 09:29 PM	#5
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Randy, I meant the mounting holes. I have a smooth door now and am going to add the emblem. Looks like straight down from the edge of the door button. But how far up from the bottom edge or from the center of the ridge? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

12-11-2003, 10:22 PM	#6
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Here's what the assembly manual shows. Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

12-12-2003, 02:23 AM	#7
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	while speaking of glove box emblems, where there any specific trucks that they came on or what cause none of mine have them and i have never personally seen one so what is the deal. __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

12-12-2003, 07:54 PM	#8
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Thanks Greg and Rob. I will try to line it up. Rob, calling you. Crazy Texan, I do not know the answer to that. None of my trucks have emblems but then I have cheap trucks. The truck in question will not be a stock truck and will have a little from every model and more, hence the Custom emblem. Couldn't find a Hienz 57 emblem. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

12-12-2003, 08:26 PM	#9
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	Another glovebox emblem question- Where do you get the little "dohickey's" that go into the hole where you then insert the emblem stud into? I looked at autozone and they were NO help at all. Anyone?? __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

12-12-2003, 11:40 PM	#10
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I second that question. After looking at Blazermans pic i see that you are not to drill through the back side so no nuts are used. Where do you get those dohickeys? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

12-13-2003, 12:43 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I got some of those at a parts store, in a packet of dohickey's. Kevin, I don't think that 4x4 was a cheap truck!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.