OR WTB Rear portion of a 2-Piece Driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LostMy65 · 05-28-2020, 08:12 PM

WTB Rear portion of a 2-Piece Driveshaft that has the HD carrier bearing. I just need the rear driveshaft.

1960chevypanel · 05-28-2020, 08:46 PM

What length?

LostMy65 · 05-28-2020, 09:30 PM

What length you got?

1960chevypanel · 05-29-2020, 02:05 AM

I've got a pile of them. Can you measure between the front shaft and the rear end? And what diameter is the tube?

LostMy65 · 05-29-2020, 06:44 PM

30.75 inches plus or minus.

1960chevypanel · 05-30-2020, 08:54 PM

Closest one I have is 28.5" including the yoke. A longer yoke might do the trick.

LostMy65 · 05-30-2020, 11:08 PM

Thanks for checking.
But yes, I meant to say 30.75 center of u-joint to center of u-joint.

1960chevypanel · 05-31-2020, 02:02 AM

Well that's different. I'll have to check again, probably Mon or Tues.

1960chevypanel · 06-01-2020, 08:21 PM

I have a couple that are 33" at the center of the u-joints.

LostMy65 · 06-01-2020, 08:46 PM

Quote:

Originally Posted by 1960chevypanel

I have a couple that are 33" at the center of the u-joints.

Yeah, 33 is a little too long.
Thanks though.

LostMy65 · 06-15-2020, 09:42 PM

anyone local?

chev-obsession · 11-20-2020, 01:24 AM

Did you ever find one?

LostMy65 · 11-20-2020, 08:30 PM

Quote:

Originally Posted by chev-obsession

Did you ever find one?

No I did not.

chev-obsession · 11-20-2020, 09:46 PM

I believe I have the one you are looking for. I can take a measurement from center of u-joint to center of u-joint and let you know.

**Captainfab** · 11-20-2020, 10:49 PM

I'm assuming that you need the HD driveshaft and not the light duty driveshaft since that is what is in the pic you posted?

LostMy65 · 11-21-2020, 03:36 AM

Yes, when I wrecked my longbed back in the 80's, I just had the rear portion of the driveline shortened.
My uncle welded something that I could bolt to the 62 x-frame donor.
My 65 is still on the 62 donor frame. I've been thinking of going back to a longbed, and to do that, I need the stock length of the rear portion of the driveline.

chev-obsession · 11-27-2020, 04:59 PM

I measured 43.5” center to center on the U joints. Let me know if this is what you are looking for
Posted via Mobile Device

LostMy65 · 11-27-2020, 05:24 PM

Thanks, I need 30.75 inches plus or minus center of u-joint to center of u-joint.

**Clatterville trolley** · 11-27-2020, 08:49 PM

Quote:

Originally Posted by LostMy65

Thanks, I need 30.75 inches plus or minus center of u-joint to center of u-joint.

Do you know if any 67-72 shafts would work - I have several from trucks I have parted out and would be willing to measure some to see if I have what you need. I see that the length center to center u-joint needs to be 30.75 inches, but I think I missed seeing the tube diameter.

LostMy65 · 04-12-2021, 10:19 PM

Thanks,
Still looking for local.

LostMy65 · 12-19-2021, 05:22 PM

Quote:

Originally Posted by Captainfab

I'm assuming that you need the HD driveshaft and not the light duty driveshaft since that is what is in the pic you posted?

Yes, I need the HD one.

05-28-2020, 08:12 PM	#1
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	WTB Rear portion of a 2-Piece Driveshaft WTB Rear portion of a 2-Piece Driveshaft that has the HD carrier bearing. I just need the rear driveshaft. Attached Images __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 Last edited by LostMy65; 05-28-2020 at 08:27 PM.

05-28-2020, 08:46 PM	#2
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: WTB Rear portion of a 2-Piece Driveshaft What length?

05-28-2020, 09:30 PM	#3
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB Rear portion of a 2-Piece Driveshaft What length you got? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

05-29-2020, 02:05 AM	#4
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: WTB Rear portion of a 2-Piece Driveshaft I've got a pile of them. Can you measure between the front shaft and the rear end? And what diameter is the tube?

05-29-2020, 06:44 PM	#5
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB Rear portion of a 2-Piece Driveshaft 30.75 inches plus or minus. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

05-30-2020, 08:54 PM	#6
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: WTB Rear portion of a 2-Piece Driveshaft Closest one I have is 28.5" including the yoke. A longer yoke might do the trick.

05-30-2020, 11:08 PM	#7
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB Rear portion of a 2-Piece Driveshaft Thanks for checking. But yes, I meant to say 30.75 center of u-joint to center of u-joint. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

05-31-2020, 02:02 AM	#8
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: WTB Rear portion of a 2-Piece Driveshaft Well that's different. I'll have to check again, probably Mon or Tues.

06-01-2020, 08:21 PM	#9
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: WTB Rear portion of a 2-Piece Driveshaft I have a couple that are 33" at the center of the u-joints.

06-15-2020, 09:42 PM	#11
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB Rear portion of a 2-Piece Driveshaft anyone local? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

11-20-2020, 01:24 AM	#12
chev-obsession Registered User Join Date: Jul 2008 Location: kennewick, WA Posts: 1,513	Re: WTB Rear portion of a 2-Piece Driveshaft Did you ever find one? __________________ 1965 c/10 swb 1969 c/10 lwb

11-20-2020, 09:46 PM	#14
chev-obsession Registered User Join Date: Jul 2008 Location: kennewick, WA Posts: 1,513	Re: WTB Rear portion of a 2-Piece Driveshaft I believe I have the one you are looking for. I can take a measurement from center of u-joint to center of u-joint and let you know. __________________ 1965 c/10 swb 1969 c/10 lwb

11-20-2020, 10:49 PM	#15
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: WTB Rear portion of a 2-Piece Driveshaft I'm assuming that you need the HD driveshaft and not the light duty driveshaft since that is what is in the pic you posted? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-21-2020, 03:36 AM	#16
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB Rear portion of a 2-Piece Driveshaft Yes, when I wrecked my longbed back in the 80's, I just had the rear portion of the driveline shortened. My uncle welded something that I could bolt to the 62 x-frame donor. My 65 is still on the 62 donor frame. I've been thinking of going back to a longbed, and to do that, I need the stock length of the rear portion of the driveline. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

11-27-2020, 04:59 PM	#17
chev-obsession Registered User Join Date: Jul 2008 Location: kennewick, WA Posts: 1,513	I measured 43.5” center to center on the U joints. Let me know if this is what you are looking for Posted via Mobile Device Attached Images



Register or Log In To remove these advertisements.

11-27-2020, 05:24 PM	#18
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB Rear portion of a 2-Piece Driveshaft Thanks, I need 30.75 inches plus or minus center of u-joint to center of u-joint. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

04-12-2021, 10:19 PM	#20
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: WTB Rear portion of a 2-Piece Driveshaft Thanks, Still looking for local. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

Register or Log In To remove these advertisements.