TX New parts not needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**8man** · 05-31-2020, 04:31 PM

Left inner cab corner, somehow I wound up with 1 more than I needed

IMG_0543 by Robert Moorman, on Flickr
$25 + shipping

54 cowl vent filler panel, I went another way.

IMG_0544 by Robert Moorman, on Flickr
$15 + shipping

Right and left inner cowls, I patched the ones I had.

IMG_0545 by Robert Moorman, on Flickr
$25 each plus shipping

Drivers side kick panel, I didn't need it.

IMG_0546 by Robert Moorman, on Flickr

$15 + shipping

Lower door skin, Right side. I didn't need it.

IMG_0547 by Robert Moorman, on Flickr

$20 + shipping

I have a new 47-53 center windshield brace, when I got ready to weld it in, I found the original and decided to go with it.

IMG_0550 by Robert Moorman, on Flickr

$15 + shipping

And finally, the left and right floor pans that I don't need because I had the complete floor built, but I did weld up the holes on the Drivers side.

IMG_0551 by Robert Moorman, on Flickr

IMG_0552 by Robert Moorman, on Flickr

$50 each + shipping

Leroy-B1 · 06-07-2020, 07:10 AM

shipping on running boards to 28754?

**8man** · 06-08-2020, 08:23 AM

Running boards still available, Leroy found he had some already.

Jesse49chevy · 07-19-2020, 12:15 AM

Are the running boards still available?

**8man** · 07-19-2020, 08:18 AM

Jesse, they are still available.

Jesse49chevy · 07-19-2020, 08:50 AM

Okay.. I'll come get them from you.

**8man** · 07-19-2020, 08:53 AM

Just PM'd you.

**8man** · 07-19-2020, 12:37 PM

Jesse got 2 running boards, I have 2 left that need some work.

NorCalGal · 07-31-2020, 02:05 AM

Hey Robert I may be interested in the cross sill set. Can you send me some pictures of the brackets. How many boards on the cross sill? 8 or 9 ?

sdkid · 09-22-2020, 12:53 AM

Are the floor panels available?

**8man** · 11-21-2020, 09:25 AM

Floor pans are still available.

Ag493100 · 02-05-2021, 05:53 PM

Is the windshield brace still available?

**8man** · 02-05-2021, 06:04 PM

I'll have to go make sure, but I believe it is. Looks like you are in TX, are you close to BCS?

**8man** · 02-05-2021, 06:23 PM

I do have a windshield brace available. It's not the one in the picture, so if you send me a phone or email I'll send you a picture.

Robert

crushermechanic · 12-20-2021, 02:48 PM

Are the floor pans available

**8man** · 12-20-2021, 03:24 PM

Yes, they are still available.

crushermechanic · 12-20-2021, 04:35 PM

What else is still available? Will they fit a 51 cab? If so I will take them

**8man** · 12-20-2021, 06:25 PM

Pretty much all of it is still available. I don't think I sold anything. Let me know what you want and give me your zip code and I'll get a shipping cost for it all.

crushermechanic · 12-20-2021, 06:54 PM

I want the floor pans,cowl panels, and kick panel. My zip is 32569

crushermechanic · 12-20-2021, 09:01 PM

I want the floor pans,cowl panels, and kick panel. My zip is 32569

**8man** · 12-23-2021, 09:11 AM

Sold floor pans, cowl panels and kick panel.

05-31-2020, 04:31 PM	#1
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	New parts not needed Left inner cab corner, somehow I wound up with 1 more than I needed IMG_0543 by Robert Moorman, on Flickr $25 + shipping 54 cowl vent filler panel, I went another way. IMG_0544 by Robert Moorman, on Flickr $15 + shipping Right and left inner cowls, I patched the ones I had. IMG_0545 by Robert Moorman, on Flickr $25 each plus shipping Drivers side kick panel, I didn't need it. IMG_0546 by Robert Moorman, on Flickr $15 + shipping Lower door skin, Right side. I didn't need it. IMG_0547 by Robert Moorman, on Flickr $20 + shipping I have a new 47-53 center windshield brace, when I got ready to weld it in, I found the original and decided to go with it. IMG_0550 by Robert Moorman, on Flickr $15 + shipping And finally, the left and right floor pans that I don't need because I had the complete floor built, but I did weld up the holes on the Drivers side. IMG_0551 by Robert Moorman, on Flickr IMG_0552 by Robert Moorman, on Flickr $50 each + shipping __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 Last edited by 8man; 11-12-2020 at 10:28 AM.

06-07-2020, 07:10 AM	#2
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 2,001	Re: New parts not needed shipping on running boards to 28754?

06-08-2020, 08:23 AM	#3
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	Re: New parts not needed Running boards still available, Leroy found he had some already. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

07-19-2020, 12:15 AM	#4
Jesse49chevy Registered User Join Date: May 2012 Location: Houston Posts: 477	Re: New parts not needed Are the running boards still available? __________________ Semper Fi Check out my project: http://67-72chevytrucks.com/vboard/s...d.php?t=559086

07-19-2020, 08:18 AM	#5
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	Re: New parts not needed Jesse, they are still available. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

07-19-2020, 08:50 AM	#6
Jesse49chevy Registered User Join Date: May 2012 Location: Houston Posts: 477	Re: New parts not needed Okay.. I'll come get them from you. __________________ Semper Fi Check out my project: http://67-72chevytrucks.com/vboard/s...d.php?t=559086

07-19-2020, 08:53 AM	#7
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	Re: New parts not needed Just PM'd you. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

07-19-2020, 12:37 PM	#8
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	Re: New parts not needed Jesse got 2 running boards, I have 2 left that need some work. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

07-31-2020, 02:05 AM	#9
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 682	Re: New parts not needed Hey Robert I may be interested in the cross sill set. Can you send me some pictures of the brackets. How many boards on the cross sill? 8 or 9 ? __________________ Jan's 53

09-22-2020, 12:53 AM	#10
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Re: New parts not needed Are the floor panels available? __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

11-21-2020, 09:25 AM	#11
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	Re: New parts not needed Floor pans are still available. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

02-05-2021, 05:53 PM	#12
Ag493100 Registered User Join Date: Nov 2016 Location: Tx Posts: 9	Re: New parts not needed Is the windshield brace still available?

02-05-2021, 06:04 PM	#13
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	Re: New parts not needed I'll have to go make sure, but I believe it is. Looks like you are in TX, are you close to BCS? __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

02-05-2021, 06:23 PM	#14
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	Re: New parts not needed I do have a windshield brace available. It's not the one in the picture, so if you send me a phone or email I'll send you a picture. Robert __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

12-20-2021, 02:48 PM	#15
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 361	Re: New parts not needed Are the floor pans available



Register or Log In To remove these advertisements.

12-20-2021, 03:24 PM	#16
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	Re: New parts not needed Yes, they are still available. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

12-20-2021, 04:35 PM	#17
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 361	Re: New parts not needed What else is still available? Will they fit a 51 cab? If so I will take them

12-20-2021, 06:25 PM	#18
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	Re: New parts not needed Pretty much all of it is still available. I don't think I sold anything. Let me know what you want and give me your zip code and I'll get a shipping cost for it all. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

12-20-2021, 06:54 PM	#19
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 361	Re: New parts not needed I want the floor pans,cowl panels, and kick panel. My zip is 32569

12-20-2021, 09:01 PM	#20
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 361	Re: New parts not needed I want the floor pans,cowl panels, and kick panel. My zip is 32569

12-23-2021, 09:11 AM	#21
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,524	Re: New parts not needed Sold floor pans, cowl panels and kick panel. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

Register or Log In To remove these advertisements.