Seat hardware - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pdxhall** · 06-12-2020, 05:33 PM

Does anyone have a source for seat hardware such as the bolts that hold the upper seat to the lower? Also, the seat adjuster bolts for the same area?

**The Rocknrod** · 06-12-2020, 06:40 PM

You mean like these? https://www.classicparts.com/1960-66...info/28%2D925/
The seat back bolts you'll have to find used I think. Contact Aspen Parts in Arizona. And that little adjuster too.
I took mine off and replaced them with nicer looking units, you'll still need the spacer though.

**The Rocknrod** · 06-12-2020, 08:03 PM

Wow
There is a spacer on this flange head bolt, their real proud of it

- https://www.oldsobsolete.com/product...t-nos-3762931/

**pdxhall** · 06-12-2020, 08:14 PM

Quote:

Originally Posted by The Rocknrod

Wow
There is a spacer on this flange head bolt, their real proud of it

- https://www.oldsobsolete.com/product...t-nos-3762931/

That is one of the bolts I'm talking about but there should be a better option...
The other one is the flat headed bolt that adjusts the tilt of the back. The first ones are the track mounting bolts and I've got that covered. Thanks.

**The Rocknrod** · 06-12-2020, 08:18 PM

Quote:

Originally Posted by pdxhall

That is one of the bolts I'm talking about but there should be a better option...
The other one is the flat headed bolt that adjusts the tilt of the back. The first ones are the track mounting bolts and I've got that covered. Thanks.

Never seen new ones on the seat back to seat bottom bolts.
The adjusters either.
Again call Aspen in Arizona.

franken · 06-12-2020, 10:36 PM

Quote:

Originally Posted by The Rocknrod

Wow
There is a spacer on this flange head bolt, their real proud of it

- https://www.oldsobsolete.com/product...t-nos-3762931/

I'm pretty sure I'd use a quality bolt and a bushing rather than pay $50. Then again I'm not sure what stress the bolt has/will have on it so maybe not.

To the OP, lots of special bolts, etc. are at the hardware/home store, but lots are from Asia.

06-12-2020, 05:33 PM	#1
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,085	Seat hardware Does anyone have a source for seat hardware such as the bolts that hold the upper seat to the lower? Also, the seat adjuster bolts for the same area? __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

06-12-2020, 06:40 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Seat hardware You mean like these? https://www.classicparts.com/1960-66...info/28%2D925/ The seat back bolts you'll have to find used I think. Contact Aspen Parts in Arizona. And that little adjuster too. I took mine off and replaced them with nicer looking units, you'll still need the spacer though. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-12-2020, 08:03 PM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Seat hardware Wow There is a spacer on this flange head bolt, their real proud of it - https://www.oldsobsolete.com/product...t-nos-3762931/ __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.