Cast your vote ---> P01 or Stainles Steel Dog Dish - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CS1972** · 07-25-2020, 05:43 PM

Ok, I have a set of P01 "Full Wheel Hubcap" and the "Stainless Steel Dog Dish Hubcaps", which one looks the best on my truck?

**Already Gone** · 07-25-2020, 06:09 PM

Being a 4 x 4 I say the dog dishes.

countr · 07-25-2020, 06:19 PM

I like the dog dish.

Thanks Russ

**MySons68C20** · 07-25-2020, 06:51 PM

Dog dish no question

darkhorse970 · 07-25-2020, 07:47 PM

Dog dish

**Ironhorse** · 07-25-2020, 07:52 PM

My vote went to the dog dish caps, just like the looks better.

**jocko** · 07-25-2020, 08:12 PM

They both look great, I'd go with what it was born with

**DeadheadNM** · 07-25-2020, 08:49 PM

Actually, I really like the PO1 covers. Never thought I’d ever choose them over caps - maybe the wheel depth has me leaning against caps. Either way, truck looks great.

Edit: Bare white steel wheels also look good imo

lil hoodlum · 07-25-2020, 11:35 PM

I actually like both of them on your truck. But if I was forced to choose one, it would be the PO1's. Maybe add a thin white walled tire to go with 'em. Check out C10 Kings threads, Rene goes with the PO1's with thin white walled tires.

**special-K** · 07-26-2020, 06:22 AM

In simple terms the choice is between hubcaps or wheel covers.

I don't like wheel covers on 4wds at all. I look and see a bad mistake. They just don't belong. Hubcaps almost fit there, too. People may think nice hubcaps are hard to find, but actually there have been an amazing amount of "nice" hubcaps come across the board and reason being most got popped of and put on a shelf when new. When the 4wd craze really kicked in mid-late '70s I watched the guys who bought their first 4wd new proceed to destroy their hubcaps and bumpers before knocking down a handful of payments, if not before the first one!

These days most are babied, so not such a concern. But hubcaps look right and look sensible. Wheelcovers look like they are begging for dings and scratches. And... I've always felt wheelcovers with whitewalls and hubcaps with blackwalls were the proper combinations. Dress up or dress down/deluxe or standard no matter car or truck. That's what I grew used to seeing when growing up

Rene, or C/10 King goes with medium width whitewalls, 1". They are considered narrow whitewalls compared to much wider wide whitewalls. Thin whitewalls are 3/8"-1/2". Those are what were being mounted in this era. Similar width as redwalls. The look Rene coined looks awesome

Redneck Rydes · 07-26-2020, 09:03 AM

Dog

toms68cst · 07-26-2020, 09:19 AM

Switch them out every month. I like them both!

**special-K** · 07-26-2020, 09:46 AM

Quote:

Originally Posted by toms68cst

Switch them out every month. I like them both!

I was going to say "both" as well. That is the beauty of factory-style wheels and hubcap/wheelcovers. Go out and find yourself some other attractive looking caps and covers to really spice up your life!

. I have '68 chrome and '65 GTO hubcaps for my '67. Also have a set of S15 caps with bare center area, all shiny aluminum, not painted black or grey. I also have '76-'91 GMC hubcaps and would like to find some earlier ones. I have a set each of '69-'75 as well as Monte Carlo/Highlander wheel covers since they don't have a bowtie or say Chevrolet. Oh year, then there is the set of Gentleman Jim wheel Covers. I think I'm well set on caps and covers

Chevy trucks are easier since you can expand into all the car hubcap/wheel cap choices. This truck obviously deserves original style, though

**Ol Blue K20** · 07-26-2020, 11:12 AM

I prefer the dog dish caps myself. But, it looks good with the covers too. I say swap to the other now and then. Great looking truck by the way.

**Steeveedee** · 07-26-2020, 02:47 PM

Dog dish with white wheels. It would look better when the full wheel covers are on if the wheels were painted black, like factory. At least that's how is was done on cars- body color with hubcaps, black with full wheel covers.

yuccales · 07-26-2020, 02:53 PM

I'm liking dog dish.

**72 tigger** · 07-26-2020, 03:00 PM

Dog dish

**57taskforce** · 07-26-2020, 03:10 PM

They both look good to me but for that particular truck I like the P01’s.

**hooverfish** · 07-26-2020, 03:28 PM

Hello Ron, Great truck being a Super and a 4x4.
Have to vote for the Dawg Dish.
P.S. Great color too.

**CS1972** · 08-02-2020, 10:36 PM

Well...............all the votes are in and they lean the same way I do ------>DOG DISH ! Put the other 2 on Saturday and love the look. The P01's went in a box for the day I feel like a change.

I do have a followup question that I hope someone can answer. The wheels were painted and were a good job, however the P01's coming on and off over the years have exposed / scraped paint off that I would like to repair. Assuming that the previous person painted them the "official Chevy wheel color", what would that be? Does someone know the color code?

View Poll Results: Which hubcaps look the best on my truck? - P01 Full Wheel or SS Dog Dish hubcaps
P01 Full Wheel Hubcaps	21	26.92%
Stainless Steel Dog Dish Hubcaps	57	73.08%
Voters: 78. You may not vote on this poll

07-25-2020, 05:43 PM	#1
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 450	Cast your vote ---> P01 or Stainles Steel Dog Dish Ok, I have a set of P01 "Full Wheel Hubcap" and the "Stainless Steel Dog Dish Hubcaps", which one looks the best on my truck? Attached Images __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

07-25-2020, 06:09 PM	#2
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,171	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish Being a 4 x 4 I say the dog dishes. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

07-25-2020, 06:19 PM	#3
countr Registered User Join Date: Dec 2015 Location: Russell, Iowa Posts: 2,009	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish I like the dog dish. Thanks Russ

07-25-2020, 06:51 PM	#4
MySons68C20 Senior Member Join Date: Sep 2014 Location: Wenatchee, Wa Posts: 988	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish Dog dish no question

07-25-2020, 07:47 PM	#5
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,105	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish Dog dish __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

07-25-2020, 07:52 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,362	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish My vote went to the dog dish caps, just like the looks better. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-25-2020, 08:12 PM	#7
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 18,001	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish They both look great, I'd go with what it was born with

07-25-2020, 08:49 PM	#8
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,484	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish Actually, I really like the PO1 covers. Never thought I’d ever choose them over caps - maybe the wheel depth has me leaning against caps. Either way, truck looks great. Edit: Bare white steel wheels also look good imo __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 07-26-2020 at 09:48 AM. Reason: Added

07-25-2020, 11:35 PM	#9
lil hoodlum Registered User Join Date: Oct 2009 Location: Denton, Texas Posts: 1,759	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish I actually like both of them on your truck. But if I was forced to choose one, it would be the PO1's. Maybe add a thin white walled tire to go with 'em. Check out C10 Kings threads, Rene goes with the PO1's with thin white walled tires.

07-26-2020, 06:22 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish In simple terms the choice is between hubcaps or wheel covers. I don't like wheel covers on 4wds at all. I look and see a bad mistake. They just don't belong. Hubcaps almost fit there, too. People may think nice hubcaps are hard to find, but actually there have been an amazing amount of "nice" hubcaps come across the board and reason being most got popped of and put on a shelf when new. When the 4wd craze really kicked in mid-late '70s I watched the guys who bought their first 4wd new proceed to destroy their hubcaps and bumpers before knocking down a handful of payments, if not before the first one! These days most are babied, so not such a concern. But hubcaps look right and look sensible. Wheelcovers look like they are begging for dings and scratches. And... I've always felt wheelcovers with whitewalls and hubcaps with blackwalls were the proper combinations. Dress up or dress down/deluxe or standard no matter car or truck. That's what I grew used to seeing when growing up Rene, or C/10 King goes with medium width whitewalls, 1". They are considered narrow whitewalls compared to much wider wide whitewalls. Thin whitewalls are 3/8"-1/2". Those are what were being mounted in this era. Similar width as redwalls. The look Rene coined looks awesome __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-26-2020 at 09:50 AM.

07-26-2020, 09:03 AM	#11
Redneck Rydes Registered User Join Date: Feb 2016 Location: Trenton,Ontario & South Carolina Posts: 755	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish Dog

07-26-2020, 09:19 AM	#12
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,300	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish Switch them out every month. I like them both! __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

07-26-2020, 11:12 AM	#14
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,389	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish I prefer the dog dish caps myself. But, it looks good with the covers too. I say swap to the other now and then. Great looking truck by the way. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

07-26-2020, 02:47 PM	#15
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,990	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish Dog dish with white wheels. It would look better when the full wheel covers are on if the wheels were painted black, like factory. At least that's how is was done on cars- body color with hubcaps, black with full wheel covers. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA



Register or Log In To remove these advertisements.

07-26-2020, 02:53 PM	#16
yuccales Registered User Join Date: May 2011 Location: Northern Calif. Posts: 3,832	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish I'm liking dog dish.

07-26-2020, 03:00 PM	#17
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,281	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish Dog dish __________________ 71 C10 72 K20 72 K10 Super Kirk

07-26-2020, 03:10 PM	#18
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,600	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish They both look good to me but for that particular truck I like the P01’s. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

07-26-2020, 03:28 PM	#19
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,147	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish Hello Ron, Great truck being a Super and a 4x4. Have to vote for the Dawg Dish. P.S. Great color too. __________________ Larry 84 Chevy SWB, "Roy", dark blue OG paint, 5.7 LS1, 4L60, Vintage Air, 96k miles. "It's a sorry man who can't find his wife a good job"

08-02-2020, 10:36 PM	#20
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 450	Re: Cast your vote ---> P01 or Stainles Steel Dog Dish Well...............all the votes are in and they lean the same way I do ------>DOG DISH ! Put the other 2 on Saturday and love the look. The P01's went in a box for the day I feel like a change. I do have a followup question that I hope someone can answer. The wheels were painted and were a good job, however the P01's coming on and off over the years have exposed / scraped paint off that I would like to repair. Assuming that the previous person painted them the "official Chevy wheel color", what would that be? Does someone know the color code? __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

Register or Log In To remove these advertisements.