CO Parting 65 Longbox Stepside

[robbieg454]

ok so here is what i have left
Good solid hood has hail damage
stake bed pockets
i have a complete cab no doors speedo (non Gauge) heater core assy the cab is way too rusty to salvage
i have 2 trans missions i have a completely rebuild 420 never ran and a 3 speed 218 in good condition. i have the original 230 that runs good but leaks oil. i have a 12 bolt 3.07 open rear
HD over load springs and trailing arms. All the glass and door mechanicals.
solid cowl sheetmetal
Have the pick up floor braces.
mirrors
3on the tree column
6cly frame mounts and original motor mounts
brake parts no cables just the mechanism mounted to the farm
also have a farm left over that is rusty but somewhat useable.
please send me your number with any parts i don't have listed and i will call you back and get you pictures. I don't want to ship the big items due to cost but will assist you in any way to help. my number is 701five2zero99four0 no texts just call thanks

[1960chevypanel]

Price on motor mounts? Also interested in overload springs depending on pics and price.

[65 GMC]

How much for the 3.07 12 Bolt rear axle?

[roll_the_dice]

How much for the mirrors?

[robbieg454]

Mirrors 75 shipped
Springs 75 shipped
Motor Mounts 50 shipped
Read end 150 no shipping
Don’t really know what this stuff is worth sorry about no prices

[1960chevypanel]

Thanks, do you have the contact plates for them? The axle u-bolts go through them.

[robbieg454]

Yes I believe so I will get them off and take a picture tomorrow

[65 GMC]

Where in Colorado are you located? I'm right in the middle of Kansas.

[1960chevypanel]

Originally Posted by robbieg454

Yes I believe so I will get them off and take a picture tomorrow

Ok cool, I'll take them pending a pic. Can you do $100 shipped for the springs and mounts?

[robbieg454]

Ok so only got one off the other was cracked and someone welded it to the trailing arm. I’m in south Colorado Springs in fountain.

[robbieg454]

I have 2 good master cylinders. One square one round both worked but old
60 each includes shipping also have the original trans shields. 60 shipped. Thanks

[jrusher]

I will take mirrors if still available. Thx

[robbieg454]

PM sent

[1960chevypanel]

Originally Posted by robbieg454

Ok so only got one off the other was cracked and someone welded it to the trailing arm. I’m in south Colorado Springs in fountain.

Can you cut it off with an angle grinder without damaging it any more? If so I can clean it up and repair it. I don't think I can use the springs without that.

[robbieg454]

Got the brackets off one looks great the other is useable but needs work.

[1960chevypanel]

Ok cool, thanks for doing that. PM me your payment info and I'll get it squared away. Also let me know if you can do a package price with the motor mounts.

[jrusher]

Hi rob . Was just wandering if mirrors shipped ?

[sofilofi]

Hi do you still have this bracket?

[robbieg454]

Yes I still have it