MI Sbc swp alt .bracket and pulleys

[Abe31968]

I have a assortment of oem pulleys for drivers side alternator. With power steering or not .plus air if you need.crank .water for are trucks.pcice depends on what set up u need.67-68style or69-71 style

[Abe31968]

Bump

[NGN]

If in good condition, straight without rust, I'd be interested in the pullies for a 67 327 with power steering AC and of course the alternator, also, maybe the bracket for the power steering pump, Thanks

[Abe31968]

I ll get pics tomorrow I dont have ps brackets that I'm going to get rid of.this is on a 68 but I believe it's the same

[NGN]

Pic would be nice, thanks

[Abe31968]

Here's pics first pic is of 68 set up waterpump is. Atwo groove crank is a 4 groove that what you need for alt.air smog and ps. I was trying to tell you about the small bolt pattern waterpump pulley.the crank is 2groove steel and a 2 groove cast outer pulley

The second pic is of a 2groove waterpump large hole pattern also that pulley is smaller in diameter .the crank is a 2 pulley steel and a 2 groove cast or a steel 1 pulley add on

[Abe31968]

Ttt

[rechinca]

Can you send me the part numbers stamped on them?

[Abe31968]

Bump

[dozerbill72]

Do you have a 2 groove inner crank pulley for A/C? If so how much shipped to 72616.

Thanks, Bill

[Abe31968]

Originally Posted by dozerbill72

Do you have a 2 groove inner crank pulley for A/C? If so how much shipped to 72616.

Thanks, Bill

Sorry just seen you needed a crank pulley yes I have one 25dls plus ride should not cost more then 15 dls to ship .so 40 to your door

[Abe31968]

Ttt

[dozerbill72]

I will take it, let me know how you want payed.

Thanks Bill

[Abe31968]

Originally Posted by dozerbill72

I will take it, let me know how you want payed.

Thanks Bill

Pay pal---- gurtrude_50@hot mail .com.

Thanks.

[dozerbill72]

Payment sent.

Thanks, Bill