64 C10 project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dream66 · 10-27-2020, 11:55 PM

Pic of my uncle and his new 64... in 1964 - Houston, TX followed by my re-acquisition pic of it with my brother in 2019 after it was owned by a 3rd party for 20 years.

Other pics are current restoration progress:

Interesting tidbit - the truck still had the aftermarket clip-on visor mirror with frosted blank areas to write mileages for oil change etc that my uncle installed during the 60's. Sadly, the original engine and hubcaps did not survive.

**cwcarpenter98** · 10-28-2020, 12:04 AM

Man, that's great how you were able to get it back after 20 years. I love hearing stories like these

dream66 · 10-28-2020, 12:11 AM

Interestingly, I found the truck only 15 miles away from my current home. My brother and I had a 1980's vintage registration receipt from our dad's archives with the VIN and after 5 years of searching for the then current owner with no luck; it came up for sale on craigslist.

**The Rocknrod** · 10-28-2020, 08:00 AM

Man that's crazy lucky to have found that. Congrats. Great work there also.

SCOTI · 10-29-2020, 04:51 PM

Very cool story!

doobiebro · 11-03-2020, 02:45 PM

Cool story!

What are your restoration plans? Keep it all original like your uncle had it?

dream66 · 11-03-2020, 04:09 PM

Over 600 man hours of metal work to restore original cab and bed. We did have to use a few patch panels from a donor truck though. Rocker panels and floor patches had to use reproduction parts. Oh well..........

My body guy is very good.

dream66 · 11-03-2020, 04:26 PM

Original dealer installed bumper before and after pics

dream66 · 11-03-2020, 04:34 PM

Pic of hillbilly repair done to seat by interim owner.

Believe it or not, we were able to fabricate repairs to nearly original with listing wire and mild steel rods...even the supports with the spiral pig tails (second pic)

Of course no one will ever see the restoration we accomplished...BUT WE KNOW !!!

dream66 · 11-03-2020, 04:41 PM

B-pillar skin and jamb patch panel from donor cab

dream66 · 11-03-2020, 04:56 PM

There's more to the truck's history. My brother sold it in 1991 and the interim owner started up a country western band.

Here's a pic of one of their album covers with the band members tailgating.

.

**straight6chevyguy** · 11-10-2020, 11:45 AM

That's so cool.

dream66 · 11-22-2020, 08:13 PM

Paint booth weekend. Spent more time masking than actual sprayin'

https://app.photobucket.com/u/ShortR...e-f06702056905

https://youtu.be/Xr2NNJdJ8iA

**The Rocknrod** · 11-23-2020, 01:09 PM

Just FYI Photobucket has ruined many of our pictures in the past. You can post your pics on this site like this - https://www.67-72chevytrucks.com/vbo...d.php?t=627506

dream66 · 11-23-2020, 06:10 PM

I'm well aware aware of p-bucket issues. One of these days I'll find a new hosting site.

Were you able to view the pics by clicking the link?

**Ol Blue K20** · 12-03-2020, 12:15 PM

Quote:

Originally Posted by dream66

I'm well aware aware of p-bucket issues. One of these days I'll find a new hosting site.

Were you able to view the pics by clicking the link?

Not well, just saw a sliver of it at a time between their bs

**straight6chevyguy** · 12-04-2020, 01:04 PM

Any updates on the truck?

dream66 · 12-04-2020, 02:15 PM

Assembly stage. Repop parts...Grrrrrrrrrrrrrrr. Vendor= Brothers

Heater gaskets wrong size
Heater core wrong size
Kick panel vent gaskets wrong size
Vent window assembly rivets are junk

There's more but I'm tired o' typin'

dream66 · 12-04-2020, 08:35 PM

Today's pics

**Ol Blue K20** · 12-06-2020, 11:55 AM

I can see these pics. It's looking great. Good luck on the parts, hang in there you'll get it done.

J Williams · 01-02-2021, 10:55 AM

What a story! Nice work on the truck! Keep up the good work.

REDROCKER652002 · 01-02-2021, 12:48 PM

What an awesome looking truck. I really want to do this to my son's truck, but he enjoys driving it so much I don't want to take it off the road and not let him run it around. Great looking truck.

53Sparky · 01-02-2021, 08:41 PM

I love the back story, and the truck is looking great!

dream66 · 01-03-2021, 09:18 PM

Doesn't look like a whole lot of progress but the below pics show completed dash, firewall pad and floor mat. All told about 5 hours work.

Still waiting for the wiper knob and heater knob.

The good news: I am pleased to rate the rubber floor mat obtained from Brother's Truck parts at a 9-plus. It fit the contours of the floor really well and the firewall cutouts in the pedal area were nearly spot on.

The bad news: All of the OEM switches on the speedo cluster had to be slightly modified to fit the reproduction bezel. The holes were stamped about 1/16" too high resulting in the switch bodies encroaching into the bezel bend on the back side. Repro bezel is from Brother's Truck parts.

EDIT: I forgot to mention the idiot light red lenses. The originals were unusable and we used tail light repair tape to fabricate new ones. That along with a reproduction speedo lens really dressed up the dash to like new.

If you happened to notice the OEM appearing semi-flat sheen of the interior paint; we used exterior urethane base coat (which has a flat sheen) along with a special catalyst/hardener that adds only a touch of gloss along with UV protection. The steering wheel (not shown) got a couple coats of clear gloss to enhance durability.

dream66 · 01-04-2021, 08:35 AM

While completing the dash wiring we discovered 2 of the fuse holder clips were missing. The previous owner had used alternate connect pins for the heater blower and radio.

Fortunately we were able to replace the clips by robbing them from the donor truck that had already contributed roof and B pillar skins along with an OEM radio and a speaker frame / mounting bracket that we modified to accommodate a new 10 ohm speaker.

We also cut out the radio mount panel from the donor's dash to replace the one in the restored dash that my brother had modified in the 80's for an aftermarket radio.

That $1,000 donor truck has really come in handy for several parts that are not reproduced as well as an assembly guide for various mounting brackets, rubber seal attachments and correct wire connections / harness routing.

10-27-2020, 11:55 PM	#1
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	64 C10 project Pic of my uncle and his new 64... in 1964 - Houston, TX followed by my re-acquisition pic of it with my brother in 2019 after it was owned by a 3rd party for 20 years. Other pics are current restoration progress: Interesting tidbit - the truck still had the aftermarket clip-on visor mirror with frosted blank areas to write mileages for oil change etc that my uncle installed during the 60's. Sadly, the original engine and hubcaps did not survive. Attached Images Last edited by dream66; 10-28-2020 at 12:06 AM.

10-28-2020, 12:04 AM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: 64 C10 project Man, that's great how you were able to get it back after 20 years. I love hearing stories like these __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-28-2020, 12:11 AM	#3
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Interestingly, I found the truck only 15 miles away from my current home. My brother and I had a 1980's vintage registration receipt from our dad's archives with the VIN and after 5 years of searching for the then current owner with no luck; it came up for sale on craigslist.

10-28-2020, 08:00 AM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 64 C10 project Man that's crazy lucky to have found that. Congrats. Great work there also. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-29-2020, 04:51 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: 64 C10 project Very cool story! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-03-2020, 02:45 PM	#6
doobiebro Registered User Join Date: Nov 2011 Location: Chaparral NM Posts: 693	Re: 64 C10 project Cool story! What are your restoration plans? Keep it all original like your uncle had it? __________________ CURRENT & PAST CHEVY TRUCKS 60 C-10 Apache short step side 62 C-10 short step side 66 GMC Long bed fleet side 305 V-6 77 C-20 Custom Deluxe (Blue Goose)

11-03-2020, 04:09 PM	#7
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Over 600 man hours of metal work to restore original cab and bed. We did have to use a few patch panels from a donor truck though. Rocker panels and floor patches had to use reproduction parts. Oh well.......... My body guy is very good.

11-03-2020, 04:26 PM	#8
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Original dealer installed bumper before and after pics Attached Images

11-03-2020, 04:34 PM	#9
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Pic of hillbilly repair done to seat by interim owner. Believe it or not, we were able to fabricate repairs to nearly original with listing wire and mild steel rods...even the supports with the spiral pig tails (second pic) Of course no one will ever see the restoration we accomplished...BUT WE KNOW !!! Attached Images Last edited by dream66; 11-03-2020 at 04:50 PM.

11-03-2020, 04:41 PM	#10
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project B-pillar skin and jamb patch panel from donor cab Attached Images

11-03-2020, 04:56 PM	#11
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project There's more to the truck's history. My brother sold it in 1991 and the interim owner started up a country western band. Here's a pic of one of their album covers with the band members tailgating. . Attached Images

11-10-2020, 11:45 AM	#12
straight6chevyguy Senior Member Join Date: Dec 2018 Location: yamhill OR Posts: 909	Re: 64 C10 project That's so cool. __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1978 chevy c20 350 4speed 1998 chevy c1500 4.3L 5speed 2002 Chevy s10 4.3L auto 4x4 Plus a Mercury & some Fords... To many projects!

11-22-2020, 08:13 PM	#13
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Paint booth weekend. Spent more time masking than actual sprayin' https://app.photobucket.com/u/ShortR...e-f06702056905 https://youtu.be/Xr2NNJdJ8iA

11-23-2020, 01:09 PM	#14
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 64 C10 project Just FYI Photobucket has ruined many of our pictures in the past. You can post your pics on this site like this - https://www.67-72chevytrucks.com/vbo...d.php?t=627506 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

11-23-2020, 06:10 PM	#15
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project I'm well aware aware of p-bucket issues. One of these days I'll find a new hosting site. Were you able to view the pics by clicking the link?



Register or Log In To remove these advertisements.

12-04-2020, 01:04 PM	#17
straight6chevyguy Senior Member Join Date: Dec 2018 Location: yamhill OR Posts: 909	Re: 64 C10 project Any updates on the truck? __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1978 chevy c20 350 4speed 1998 chevy c1500 4.3L 5speed 2002 Chevy s10 4.3L auto 4x4 Plus a Mercury & some Fords... To many projects!

12-04-2020, 02:15 PM	#18
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Assembly stage. Repop parts...Grrrrrrrrrrrrrrr. Vendor= Brothers Heater gaskets wrong size Heater core wrong size Kick panel vent gaskets wrong size Vent window assembly rivets are junk There's more but I'm tired o' typin'

12-04-2020, 08:35 PM	#19
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Today's pics Attached Images

12-06-2020, 11:55 AM	#20
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: 64 C10 project I can see these pics. It's looking great. Good luck on the parts, hang in there you'll get it done. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

01-02-2021, 10:55 AM	#21
J Williams Registered User Join Date: Jun 2014 Location: Paul idaho Posts: 263	Re: 64 C10 project What a story! Nice work on the truck! Keep up the good work. __________________ 63 C10

01-02-2021, 12:48 PM	#22
REDROCKER652002 Registered User Join Date: Nov 2018 Location: South San Francisco CA, Posts: 441	Re: 64 C10 project What an awesome looking truck. I really want to do this to my son's truck, but he enjoys driving it so much I don't want to take it off the road and not let him run it around. Great looking truck.

01-02-2021, 08:41 PM	#23
53Sparky Registered User Join Date: Nov 2013 Location: Northglenn, Colorado Posts: 186	Re: 64 C10 project I love the back story, and the truck is looking great! __________________ We'll burn that bridge when we get there My current project: Rust Therapy 62 C10 Numbers 6:24-26

01-03-2021, 09:18 PM	#24
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Doesn't look like a whole lot of progress but the below pics show completed dash, firewall pad and floor mat. All told about 5 hours work. Still waiting for the wiper knob and heater knob. The good news: I am pleased to rate the rubber floor mat obtained from Brother's Truck parts at a 9-plus. It fit the contours of the floor really well and the firewall cutouts in the pedal area were nearly spot on. The bad news: All of the OEM switches on the speedo cluster had to be slightly modified to fit the reproduction bezel. The holes were stamped about 1/16" too high resulting in the switch bodies encroaching into the bezel bend on the back side. Repro bezel is from Brother's Truck parts. EDIT: I forgot to mention the idiot light red lenses. The originals were unusable and we used tail light repair tape to fabricate new ones. That along with a reproduction speedo lens really dressed up the dash to like new. If you happened to notice the OEM appearing semi-flat sheen of the interior paint; we used exterior urethane base coat (which has a flat sheen) along with a special catalyst/hardener that adds only a touch of gloss along with UV protection. The steering wheel (not shown) got a couple coats of clear gloss to enhance durability. Attached Images Last edited by dream66; 01-04-2021 at 08:54 AM.

01-04-2021, 08:35 AM	#25
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project While completing the dash wiring we discovered 2 of the fuse holder clips were missing. The previous owner had used alternate connect pins for the heater blower and radio. Fortunately we were able to replace the clips by robbing them from the donor truck that had already contributed roof and B pillar skins along with an OEM radio and a speaker frame / mounting bracket that we modified to accommodate a new 10 ohm speaker. We also cut out the radio mount panel from the donor's dash to replace the one in the restored dash that my brother had modified in the 80's for an aftermarket radio. That $1,000 donor truck has really come in handy for several parts that are not reproduced as well as an assembly guide for various mounting brackets, rubber seal attachments and correct wire connections / harness routing.

Register or Log In To remove these advertisements.